- New
- New
- Reduced price
- Pack
- Sale
Zestaw elementów elektronicznych SB Components - outlet
Index: OUT-27740
- New
- Reduced price
- Pack
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 165
Loading...
LED matrix 24x8 FireBeetle Cover - red
The matrix consists of 192 individually addressed red LEDs, arranged in 8 rows and 24 columns. The matrix was developed for the DFRobot FireBeetle series, it is also compatible...
Index: DFR-09379
Index: DFR-09379
Realtek Ameba RTL8195AM - WiFi + NFC module
The module is equipped with a microcontroller with the core of 32-bit ARM Cortex M3 MCU, allows you to connect to wi-fi and NFC. The system has GPIO connectors, popular...
Index: DFR-09385
Index: DFR-09385
FireBeetle DFRobot ATmega328P - BLE4.1
The board allows to extend the Arduino with the Bluetooth module. It is equipped with the ATmega328P processor and Bluetooth BLE 4.1. It offers functions similar to Bluno...
Index: DFR-10167
Index: DFR-10167
Gravity DFRobot IO Expansion + TB6612FNG 2-channel motor driver 12V/1.2 A - Shield for Arduino
Shield for Arduino which is an extension of the i/O pins and two-channel driver for DC motors TB6612FNG with a voltage of 12 V and performance of 1.2 A per channel. It also has...
Index: DFR-10828
Index: DFR-10828
DFRobot FireBeetle LoRa 433MHz
The FireBeetle module compatible with Arduino, equipped with LoRa SX127x 433 MHz module with built-in PA (Power Amplifier), controlling is through SPI interface. It is used for...
Index: DFR-10829
Index: DFR-10829
DFRobot Gravity - IO Expansion Shield for LattePanda
Shield for minicomputer LattePanda of Gravity And/O all GPIO pins that are compatible with standard Arduino and does not interfere with other LattePanda outputs. Every...
Index: DFR-10835
Index: DFR-10835
DFRobot Gravity - analog temperature sensor LM35
Analog LM35 sensor working with Arduino and Raspberry Pi. It is powered with the voltage from 3.3 V to 5 V. it can measure temperature in the range from 0 ℃ to 100 ℃. The...
Index: DFR-10842
Index: DFR-10842
ArduCam Camera Sony IMX219 8MPx - for Raspberry Pi - Rev.C
Camera module with Sony IMX219 sensor equipped with LS-40136 lens, with parameters: focal length 3.2 mm, angle 85°, iris 2.0, 1/4" format. Connected to dedicated connector...
Index: ACM-11070
Index: ACM-11070
DFRobot Gravity - flame sensor 760-1100nm
The sensor is used to detect fire. It is powered with the voltage from 3.3 V to 5.3 V. The range of the sensed wave: from 760 nm to 1100 nm. The output is an analog voltage....
Index: DFR-11254
Index: DFR-11254
DFRobot Gravity - grayscale sensor
Analog grey sensor which is able to measure the light intensity from black to white. Scale of gray is also defined as black and white, with the darkest shade of gray as black...
Index: DFR-11255
Index: DFR-11255
Module with white backlight, is equipped with a connector Gravity is ideal for working with Arduino. The LED lights up, when the pin signal switches to a low state.
Index: DFR-11272
Index: DFR-11272
DFRobot Gravity - 2x16 I2C LCD display - green
LCD display 2x16 characters with backlight in green. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.
Index: DFR-12363
Index: DFR-12363
DFRobot Gravity: digital signal isolator IB05_XT-W75R3 I2C
Digital isolator of signal I2C ffrom series Gravity. It protects the sensors from electrical interferences causing a read error through the isolation of I2C signal and...
Index: DFR-12627
Index: DFR-12627
Rangefinder - TF03 LiDAR sensorIP67 - 180m - UART, CAN
Accurate laser distance sensor operating in the range from 0.1 to 180 m with an accuracy of 0.1 m. The supply voltage is 5 V. The device communicates using the UART, CAN,...
Index: BEN-12792
Index: BEN-12792
Arduino Ethernet Shield ASX00006 MKR - Shield for Arduino MKR
Shield for Arduino MKR enabling the connection to the Ethernet network . It is equipped with a system W5500 and a connector for microSD cards. It c ommunicates via the SPI...
Index: ARD-12951
Index: ARD-12951
DFRobot Gravity Expansion Shield - expansion board for the OpenMV Cam M7 camera
Shield extending the capabilities of the camera OpenMV Cam M7 with additional connectors for connecting the sensors and modules from the Gravity series. Board is equipped with...
Index: DFR-13502
Index: DFR-13502
Dobot Magician - Robot Vision Kit
Set of hardware platform for development of visualization system of robots. Along with Dobot Magician provides integration of video surveillance and robot automation systems....
Index: ROB-13698
Index: ROB-13698
ROCKPro64 Power Cable For Dual SATA Drives
SATA cable is used to power dual drives. Its length is 30 centimeters.
Index: PIN-14426
Index: PIN-14426
3D scanner - Shining 3D EinScan SP
EinScan SP is a professional device for 3D scanning of physical objects with maximum dimensions 1200 x 1200 x 1200 mm . The scanner is equipped with a rotary table...
Index: GLD-14910
Index: GLD-14910
Camera for scanning color textrures for 3D scanners EinScan Pro 2X/Pro 2X Plus - EinScan Color Pack
Camera for EinScan Pro 2X and Pro 2X Plus 3D scanners. With the camera you can scan the color textures of objects.
Index: GLD-14920
Index: GLD-14920
HD camera for 3D scanner EinScan Pro 2X Plus - EinScan HD Prime Pack
Camera for EinScan Pro 2X Plus 3D scanner. The device enables you to make very detailed scans. The scanning speed in manual HD scanning mode is increased by 30% .
Index: GLD-14921
Index: GLD-14921
Gravity - Analog Electrical Conductivity Sensor - DFRobot DFR0300-H
The device allows to measure the salinity of waters and soils by examining the inverse of the resistance, which is conductivity. The conductivity of water can reflect the level...
Index: DFR-15096
Index: DFR-15096
7'' capacitive touch display 1024x600px eDP for LattePanda Alpha/Delta - DFRobot FIT0551
7" IPS LCD display with 1024 x 600 px resolution and touch function. Communicates with a LattePanda Alpha / Delta minicomputer via eDP connector. The screen has a large...
Index: DFR-15101
Index: DFR-15101
Rangefinder - TF03 LiDAR sensor IP67 - 100m - UART, CAN
Precision laser distance sensor operating in the range from 0.1 to 100 m with an accuracy of 0.1 m. The supply voltage is 5 V. The device communicates via UART, CAN interface....
Index: BEN-15195
Index: BEN-15195