Over 15 years

professional experience

Easy returns

up to 30 days

Over 1 000 000

shipped orders

Fast shipping

all across the EU

Wishlist

AIRO robot - robot with artificial intelligence - Clementoni 50819

Index: PND-25895

Filament Fiberlogy Impact PLA 1,75mm 0,85kg - Olive Green

Index: FLA-24998

Power supply multi-range Goobay 64569 3-12V/1,5A

Index: GOB-25361

NOR50 organiser - Kistenberg KNO50407

Index: PRP-25136

Gravity - ambient light and colour sensor - I2C/UART - DFRobot SEN0611

Index: DFR-25288

Solar Charger Shield v2.2 - shield for Arduino

Index: SEE-04429

Filament Rosa3D PLA Starter 1,75mm 1kg - Blue Sky

Index: ROS-25158

Limit switch 50mm - Pololu 1403

Index: PLL-00017

All new products

3-10.8V motor controller - dual channel - for Raspberry Pi Pico - Kitronik 5331

Index: KTR-19594

Reduced price
Promotion

Soldering station Zhaoxin 852D with hot air

Soldering station 2in1 hotair and tip-based Zhaoxin 852D compressor - 330W

Index: LUT-06275

Reduced price
Promotion

Grove - Vision AI module V2 Himax WiseEye2 HX6538 - Seeedstudio 101021112

Index: SEE-25285

Reduced price
Promotion

Female conncetor 40-pin angle for BBC micro:bit - red

Female conncetor 40-pin for BBC micro:bit - red

Index: DNG-14545

Reduced price
Promotion

Filament Velleman ABS 1,75mm - 750g - natural

Filament Velleman ABS 1,75mm 0,75kg - natural

Index: VEL-10279

On sale!
Promotion

Step-up/step-down converter - S9V11F3S5CMA 3,3V 1,5A with cut-off at too low voltage

Step-Up/Step-Down Voltage Regulator with Adjustable Low-Voltage Cutoff S9V11F3S5CMA -...

Index: PLL-10674

Reduced price
Promotion

Straight goldpin 2x40 connector with 2,54mm pitch - white - 10pcs. - justPi

Index: JUS-20033

Reduced price
Promotion

RGB LED WS2811 8mm addressing - 10pcs

Index: LED-07294

M5Stamp Timer Power - Power Control Module - BM8563 - M5Stack S005

Index: MSS-22675

Reduced price
Promotion

Palette 3 Pro - filament bonding system

Index: MOS-19524

On sale!
Promotion

Set od 1-12pin DIP switches - 40pcs

Index: AKS-23072

On sale!
Promotion

Phototransistor TEFT4300 3mm 925nm

Index: UCC-00446

All promotion products

Built-in power supplies

Power supplies for LED strips

In modern interior designs, LED strips and strips are increasingly common. In our Botland store you will find a wide selection of LED lighting and a full range of accessories for it, including power supplies for LED strips. We have equipment with nominal power from 3W to 360W and current capacity from 0,4 A to 30 A. When choosing a power supply, which is de facto the most important point of the led installation, you should pay attention to its quality. Poor quality products may cause overvoltage and damage the diodes.

Expand... Collapse...

Sort by:

Quantity:

Products: 54

Power supply POS-50-5-C2 - 5V/10A/50W

Mounting power supply with 50 W . Input voltage from 100 V to 240 V AC . Output voltage is 5 V . Output current up to 10 A .

5.0 (5)

Index: WAK-12246

Index: WAK-12246

Power supply DIN15W12 for DIN rail - 12V / 1,25A / 15W

DIN15W12 power supply for DIN rail - 12V/1,25A/15W

DIN rail mounted power supply unit. Input voltage from 200 V to 240 V AC. Output voltage is 12 V. Output current up to 1.25 A.

5.0 (11)

Index: ZAS-06388

Index: ZAS-06388

Hi-Link Power Supply HLK-PM01 100V-240VAC / 5VDC - 0.6A

The HLK-PM01 power supply from Hi-Link converts mains voltage (AC) from 100V to 240V into 5V direct current (DC) with a current capacity of 0.6A. It is ideal for powering...

5.0 (9)

Index: DNG-10929

Index: DNG-10929

Power supply POS-150-5-C - 5V/22A/110W

110 Watt mounting power supply unit. Input voltage from 100 V to 240 V AC . Output voltage is 5 V . Output current up to 22 A .

5.0 (6)

Index: WAK-12248

Index: WAK-12248

Power supply DIN15W24 for DIN rail - 24V / 0,63A / 15W

DIN15W24 power supply for DIN rail - 24V/0,63A/15W

DIN rail mounted power supply unit. Input voltage from 200 V to 240 V AC. Output voltage is 24 V. Output current up to 0.63 A.

5.0 (6)

Index: ZAS-06389

Index: ZAS-06389

Mean Well MDR-10-5 DIN rail power supply - 5V / 2A / 10W

Mean Well MDR-10-5 power supply for DIN rail - 5V/2A/10W

DIN rail mounted power supply unit. Input voltage from 100 V to 240 V AC. Output voltage is 5 V. Output current up to 2 A.

5.0 (1)

Index: ZAS-06386

Index: ZAS-06386

Power supply Akyga 8,5-14V / 2A / 25W

25 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 8.5 V to 14 V. The voltage...

5.0 (6)

Index: RCO-12858

Index: RCO-12858

„Power supply GPV-60-12 for LED strip - 12V/5A/60W - waterproof IP67

Waterproof, stable power supply for powering LED strips. Supply voltage: 100 V to 240 V. Output voltage: 12 VDC. Output current: 5 A. Connection: loose wire with removed...

5.0 (4)

Index: ZAS-08681

Index: ZAS-08681

GPV-18-12 - 12V/1.5A/18W waterproof GPV-18-12 - 12V/1.5A/18W LED strip and strap power supply

Power supply GLP GPV-18-12 for LED strip 12V / 1,5A / 18W - waterproof

GLP branded switch mode power supply, designed to power LED strips and strips. The power supply has an IP67 protection class and operates in temperatures from -30°C to 70°C....

5.0 (3)

Index: WAK-15671

Index: WAK-15671

Power supply for LED Akyga 11-15V / 8.3A / 100W

100 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 11 V to 15 V. The voltage...

5.0 (3)

Index: RCO-12861

Index: RCO-12861

Waterproof LED strip and strap power supply - GPV-60-24 24V/2.5A/60W

Power supply GLP GPV-60-24 for LED strip 24V / 2,5A / 60W - waterproof

The GLP GPV-60-24 Switch Mode Power Supply in an IP67 enclosure has been designed for LED lighting in high dust and humidity environments. The output voltage of the power...

5.0 (5)

Index: WAK-15673

Index: WAK-15673

Mean Well MDR-20-5 DIN rail power supply - 5V / 3A / 15W

Power supply Mean Well MDR-20-5 for DIN rail - 5V/3A/15W

DIN rail mounted power supply unit. Input voltage from 100 V to 240 V AC. Output voltage is 5 V. Output current up to 3 A.

5.0 (1)

Index: ZAS-08679

Index: ZAS-08679

Reduced price
Promotion

Power supply DIN100W24 for DIN rail - 24V/4,15A/100W

DIN rail mounted power supply unit. Input voltage from 200 V to 240 V AC. Output voltage is 24 V. Output current up to 4.15 A.

4.7 (5)

Index: ZAS-06396

Index: ZAS-06396

Mean Well LRS-100-5 power supply - 5V/18A/90W

Power supply Mean Well power 90W. Input voltage from 85 V to 264 V AC and 125 to 373 V DC. The output voltage is 5 V. Output current up to 18 A.

5.0 (1)

Index: ZAS-06023

Index: ZAS-06023

Power supply GPV-35-5 for LED strip - 5V / 5A / 25W - waterproof

Waterproof, stable power supply for powering LED strips. Supply voltage: 100 V to 240 V. Output voltage: 5 V DC. Output current: 5 A. Connection: loose wire with removed...

5.0 (2)

Index: ZAS-08686

Index: ZAS-08686

Power supply GPV-60-5 for LED strip - 5V / 8A / 40W - waterproof

Waterproof, stable power supply for powering LED strips. Supply voltage: 100 V to 240 V. Output voltage: 5 V DC. Output current: 8 A. Connector: a loose wire with removed...

Index: ZAS-08687

Index: ZAS-08687

DIN60W12 power supply DIN - 12V/5A/60W

DIN rail mounted power supply unit. Input voltage from 200 V to 240 V AC. Output voltage is 12 V. Output current up to 5 A.

4.0 (1)

Index: ZAS-06387

Index: ZAS-06387

Power supply Akyga 10.5-14V / 4.2A / 50W

50 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 10.5 V to 14 V. The voltage...

5.0 (3)

Index: RCO-12859

Index: RCO-12859

Mean Well MDR-10-24 DIN rail constant voltage power supply - 24V/0,42A

Power supply Mean Well MDR-20-24 for DIN rail - 24V / 1,0A / 24W

DIN rail mounted power supply unit. Input voltage from 85 V to 264 V AC and from 120 V to 370 V DC. Output voltage is 24 V. Output current up to 1.0 A.

5.0 (1)

Index: ZAS-13972

Index: ZAS-13972

Waterproof LED strip and strap power supply - GPV-35-24 24V/1,5A/36W

Power supply GLP GPV-35-24 for LED strip 24V/1,5A/36W - waterproof

GPV-35-24 power supply for LED lighting with 24 V output voltage and 36 W. The power supply housing is waterproof. Built-in electronic protections protect the secondary...

5.0 (2)

Index: WAK-15672

Index: WAK-15672

Power supply POS-50-12-C2 - 12V/4,2A/50,4W

The 50.4 Watt constant voltage mounting power supply has a universal range of input voltage values. The output voltage is 12 V and the output current is 4.2 A . The power...

5.0 (2)

Index: WAK-17271

Index: WAK-17271

Plastic housing Kradex Z34 - 129x68x28mm black

Plastic case Kradex Z34 - 129x68x24mm black

Two-piece universal housing for electronic circuitry made of ABS in black. The enclosure is assembled using the mounting screws included with the enclosure feet. The...

4.0 (1)

Index: KDX-05891

Index: KDX-05891

DIN30W12 power supply for DIN rail - 12V/2,5A/30W

DIN rail mounted power supply unit. Input voltage from 100 V to 240 V AC. Output voltage is 12 V. Output current up to 2,5 A.

5.0 (3)

Index: ZAS-06393

Index: ZAS-06393

Hi-Link Power Supply HLK-PM03 100V-240VAC / 3.3VDC - 1A

The HLK-PM03 power supply from Hi-Link converts mains voltage (AC) from 100 V to 240 V into 3.3 V direct current (DC) with a current capacity of 1 A. It is ideal for powering...

5.0 (4)

Index: DNG-10928

Index: DNG-10928

Important parameters

Another very important element of power supplies for LED strips is the built-in protection. In a good quality power supply there should be at least three. The first is a short circuit protection, then an overload protection and a surge protection. It is the latter that protects the LEDs in the strip, but keep in mind that some power supplies require a ground connection for the protection to fully work. Once you've checked the protections, let's look at the power efficiency of the power supply itself. The higher the better, because the power supply will lose less energy. Good quality equipment has an efficiency rating of 85% and higher.

Choosing the power supply for the installation

When choosing a power supply, we need to choose its power, to do this we should count the power of all receivers. If we do not have a receiver manual, in which the power would be given, we can count it by multiplying the supply voltage by the current drawn. Counting the power of receivers, you should remember about all the elements of the system, such as dimmers and controllers. After calculating the power, we choose the power supplies for LED strips with the same power as calculated or more. It is worth making a ten percent reserve, so as not to load the power supply at one hundred percent all the time.

Ventilation is important

When building a led lighting system, it is worth paying attention to the power supply to have some space to "breathe". Each electronic device emits heat during operation and it is better to provide it with proper ventilation and free exchange of air. Taking care of a good drainage of hot air, power supplies for LED strips will thank us with many years of trouble-free work. Sometimes manufacturers provide another parameter called MTBF, it defines the average time between failures. The rule is that the higher MTBF, the better power supply.