Over 15 years

professional experience

Easy returns

up to 30 days

Over 1 000 000

shipped orders

Fast shipping

all across the EU

Next shipment on Monday

Wishlist

Pakiet filamentów Refill Bambu Lab czarno-biały PLA - 5 szt.

Index: BML-27761

New
Reduced price
Pack
Sale

0,4mm hotend for Elegoo Neptune 4/4 Pro 3D printers

Index: ELG-26879

Standing rack installation cabinet - 19'' 22U 600x1000mm - black - Lanberg FF01-6022-23B

Index: IMP-27397

Sonoff ZB Bridge-P - ZigBee/WiFi gateway

Index: INN-27584

Module with recessed USB Type-C socket - connector for contact plate - Adafruit 6050

Index: ADA-26728

Set of 3mm LEDs - justPi - 1000 pcs. + organizer

Index: JUS-24610

Forest animal repeller - wild boars, deer, birds - IP44 - Viano

Index: VIA-27229

Limit switch 50mm - Pololu 1403

Index: PLL-00017

All new products

Step-Up/Step-Down Voltage Regulator S13V25F9 - 9V 2,5A - Pololu 4983

Index: PLL-23469

Reduced price
Sale

Triple Axis Accelerometer Breakout - LIS3DH - SparkFun SEN-13963

Index: SPF-08064

Sale
Sale

Wio Terminal Helium Monitor Kit - Seeedstudio 114992990

Index: SEE-22414

Reduced price
Sale

Panel for 4x4 keyboard - compatible with LED diodes - SparkFun COM-07835

Index: SPF-02272

Sale
Sale

37.9 kHz infrared receiver module - Velleman VMA317 - 2pcs.

Velleman VMA317 - 37,9kHz infrared receiver - 2 pcs.

Index: VEL-13027

Reduced price
Sale

Velleman - Step-Up Voltage Regulator with USB socket VMA403 - 5V 0.6 A - 2 pcs.

Index: VEL-13030

Reduced price
Sale

Female header 1x10 2mm SMD - XBee raster - SparkFun PRT-10030

Index: SPF-03396

Sale
Sale

M3S550 - triple motor controller DC 22V/1,7A - for Arduino - Pololu 5069

Index: PLL-23648

Reduced price
Sale

Laser dust / air purity sensor - PM2,5 - PMS1003 - 5V UART

Dust / air quality sensor - PM2,5 PMS1003 - 5V UART

Index: PLA-14485

Reduced price
Sale

High temperatura probe PT100 - 7x200mm

Index: SES-07467

XA1110 - MediaTek MT3333 10Hz GPS module - I2C / UART - SparkFun GPS-14414

Index: SPF-10104

Sale
Sale

All promotion products

Built-in power supplies

Power supplies for LED strips

In modern interior designs, LED strips and strips are increasingly common. In our Botland store you will find a wide selection of LED lighting and a full range of accessories for it, including power supplies for LED strips. We have equipment with nominal power from 3W to 360W and current capacity from 0,4 A to 30 A. When choosing a power supply, which is de facto the most important point of the led installation, you should pay attention to its quality. Poor quality products may cause overvoltage and damage the diodes.

Expand... Collapse...

Sort by:

Quantity:

Products: 49

Hi-Link Power Supply HLK-PM01 100V-240VAC / 5VDC - 0.6A

The HLK-PM01 power supply from Hi-Link converts mains voltage (AC) from 100V to 240V into 5V direct current (DC) with a current capacity of 0.6A. It is ideal for powering...

5.0 (9)

Index: DNG-10929

Index: DNG-10929

Power supply GPV-75-12 for LED strip - 12V / 6A / 72W - waterproof

Waterproof, stabilized AC adapter for powering LED tape. Supply voltage: 100 V to 240 V. Output voltage: 12 V DC. Output current: 6 A. Connector: free cables with stripped...

5.0 (2)

Index: ZAS-08684

Index: ZAS-08684

Mean Well MDR-20-5 DIN rail power supply - 5V / 3A / 15W

Power supply Mean Well MDR-20-5 for DIN rail - 5V/3A/15W

DIN rail mounted power supply unit. Input voltage from 100 V to 240 V AC. Output voltage is 5 V. Output current up to 3 A.

4.5 (2)

Index: ZAS-08679

Index: ZAS-08679

Hi-Link Power Supply HLK-PM03 100V-240VAC / 3.3VDC - 1A

The HLK-PM03 power supply from Hi-Link converts mains voltage (AC) from 100 V to 240 V into 3.3 V direct current (DC) with a current capacity of 1 A. It is ideal for powering...

5.0 (4)

Index: DNG-10928

Index: DNG-10928

Mean Well MDR-10-5 DIN rail power supply - 5V / 2A / 10W

Mean Well MDR-10-5 power supply for DIN rail - 5V/2A/10W

DIN rail mounted power supply unit. Input voltage from 100 V to 240 V AC. Output voltage is 5 V. Output current up to 2 A.

5.0 (1)

Index: ZAS-06386

Index: ZAS-06386

Mean Well RS-15-5 - 5V/3A DC power supply

Mean Well RS-15-5 power supply - 5V/3A/15W

15 W constant voltage power supply. Input voltage from 85 V to 264 V AC and from 120 V to 370 V DC. Output voltage is 5 V. Output current up to 3 A.

5.0 (7)

Index: ZAS-05840

Index: ZAS-05840

Power supply DIN15W12 for DIN rail - 12V / 1,25A / 15W

DIN15W12 power supply for DIN rail - 12V/1,25A/15W

DIN rail mounted power supply unit. Input voltage from 200 V to 240 V AC. Output voltage is 12 V. Output current up to 1.25 A.

5.0 (12)

Index: ZAS-06388

Index: ZAS-06388

Power supply POS-150-5-C - 5V/22A/110W

110 Watt mounting power supply unit. Input voltage from 100 V to 240 V AC . Output voltage is 5 V . Output current up to 22 A .

5.0 (6)

Index: WAK-12248

Index: WAK-12248

Mean Well HDR-15-12 power supply for DIN rail - 12V/1,25A/15W

DIN rail-mounted power supply. Input voltage from 100 V to 240 V AC. Output voltage is 12 V. Output current up to 1,25 A.

5.0 (4)

Index: ZAS-05841

Index: ZAS-05841

Mean Well HDR-30-12 power supply for DIN rail - 12V/2A/24W

Mean Well power supply mounted on a DIN rail. Input voltage regulated by AC or DC switch. Output voltage is constant and equal to 12 V. Output current up to 2 A.

5.0 (1)

Index: ZAS-05837

Index: ZAS-05837

Power supply S-36-12 - for LED strips - 12V / 3A / 36W

Stable, switched-mode industrial power supply for powering LED strips. Voltage: from 100 V to 240 V. Output voltage: 12 VDC. Output current: 3 A. Equipped with a terminal...

4.0 (2)

Index: ZAS-09645

Index: ZAS-09645

Power supply for LED Akyga 11-15V / 8.3A / 100W

100 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 11 V to 15 V. The voltage...

5.0 (3)

Index: RCO-12861

Index: RCO-12861

Waterproof LED strip and strap power supply - GPV-35-24 24V/1,5A/36W

Power supply GLP GPV-35-24 for LED strip 24V/1,5A/36W - waterproof

GPV-35-24 power supply for LED lighting with 24 V output voltage and 36 W. The power supply housing is waterproof. Built-in electronic protections protect the secondary...

5.0 (3)

Index: WAK-15672

Index: WAK-15672

Mean Well RS-25-5 mounting power supply - 5V / 5A / 25W

Mean Well RS-25-5 power supply - 5V/5A/25W

Mean Well 25W power supply. Input voltage from 100V to 240V AC. Output voltage is 5V. Output current up to 5A.

4.9 (5)

Index: ZAS-05839

Index: ZAS-05839

Power supply Akyga 10.5-14V / 4.2A / 50W

50 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 10.5 V to 14 V. The voltage...

5.0 (4)

Index: RCO-12859

Index: RCO-12859

Power supply for LED Akyga 11-15V / 6.25A / 75W

75 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 11 V to 15 V. The voltage...

4.8 (4)

Index: RCO-12860

Index: RCO-12860

Power supply for LED strips FTPC20V12-C2 - 12V 1,67A 20W - constant voltage

Constant voltage power supply designed to power LED strips . The output of the power supply provides a constant voltage of 12 V and allows you to connect LED lighting with a...

5.0 (1)

Index: WAK-22257

Index: WAK-22257

Power supply for LED strips - 12V / 16,7A / 200W

Stable, switched-mode, industrial power supply for powering LED strips. Voltage: from 110 V to 220 V. Output voltage: 12 VDC. Output current:16,7 A. Equipped with a terminal...

5.0 (2)

Index: ZAS-09651

Index: ZAS-09651

Mean Well MDR-10-24 DIN rail constant voltage power supply - 24V/0,42A

Power supply Mean Well MDR-20-12 for DIN rail - 12V / 1,67A / 20W

DIN rail mounted power supply unit. Input voltage: up to 85 V to 264 V AC or 120 V to 370 V DC . Output voltage is 12 V . Output current up to 1.67 A .

5.0 (1)

Index: ZAS-12242

Index: ZAS-12242

Plastic housing Kradex Z34 - 129x68x28mm black

Plastic case Kradex Z34 - 129x68x24mm black

Two-piece universal housing for electronic circuitry made of ABS in black. The enclosure is assembled using the mounting screws included with the enclosure feet. The...

4.0 (1)

Index: KDX-05891

Index: KDX-05891

Sale

Mounting adapter PMT-5V50W1AA- 5V / 10A / 50W

Power supply PMT-5V50W1AA - 5V/10A/50W

Block power supply, power 50 watts, input voltage 100 to 240 VAC. Output voltage 5 V. Output current up to 10 A.

5.0 (2)

Index: ZAS-07162

Index: ZAS-07162

Power supply DIN30W24 for DIN rail - 24V / 1,25A / 30W

DIN30W24 power supply for DIN rail - 24V/1,25A/30W

DIN rail mounted power supply unit. Input voltage from 200 V to 240 V AC. Output voltage is 24 V. Output current up to 1.25 A.

5.0 (1)

Index: ZAS-06394

Index: ZAS-06394

Reduced price
SPECIAL OFFERS

Power supply GPV-60-5 for LED strip - 5V / 8A / 40W - waterproof

Waterproof, stable power supply for powering LED strips. Supply voltage: 100 V to 240 V. Output voltage: 5 V DC. Output current: 8 A. Connector: a loose wire with removed...

Index: ZAS-08687

Index: ZAS-08687

Power supply for LED Akyga 12V / 2.0A / 25W - waterproof

25 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices with DC 12 V. The voltage can be...

5.0 (3)

Index: RCO-12863

Index: RCO-12863

Important parameters

Another very important element of power supplies for LED strips is the built-in protection. In a good quality power supply there should be at least three. The first is a short circuit protection, then an overload protection and a surge protection. It is the latter that protects the LEDs in the strip, but keep in mind that some power supplies require a ground connection for the protection to fully work. Once you've checked the protections, let's look at the power efficiency of the power supply itself. The higher the better, because the power supply will lose less energy. Good quality equipment has an efficiency rating of 85% and higher.

Choosing the power supply for the installation

When choosing a power supply, we need to choose its power, to do this we should count the power of all receivers. If we do not have a receiver manual, in which the power would be given, we can count it by multiplying the supply voltage by the current drawn. Counting the power of receivers, you should remember about all the elements of the system, such as dimmers and controllers. After calculating the power, we choose the power supplies for LED strips with the same power as calculated or more. It is worth making a ten percent reserve, so as not to load the power supply at one hundred percent all the time.

Ventilation is important

When building a led lighting system, it is worth paying attention to the power supply to have some space to "breathe". Each electronic device emits heat during operation and it is better to provide it with proper ventilation and free exchange of air. Taking care of a good drainage of hot air, power supplies for LED strips will thank us with many years of trouble-free work. Sometimes manufacturers provide another parameter called MTBF, it defines the average time between failures. The rule is that the higher MTBF, the better power supply.