Royal Resin epoxy resin dye - pearlescent powder - 10g - copper
The Odroid minicomputer is one of the best offerings in the embedded systems market. It has a very good hardware performance and can easily compete with such popular minicomputers as Raspberry Pi. Like most of the systems offered in the market we have also prepared an offer with a view to Odroid users, where you can find accessories and add-ons to extend the standard hardware and software capabilities of the Odroid platform. We invite you to take a look!
SATA data and power cable for Odroid H2/H3/H4
A set containing SATA cables for the complete connection of an HDD / SDD to a Odroid H2 / H3 / H4 chassis with the possibility of installing the drive. Includes SATA power cord...
Fan 12V 80x80x10,8mm - 2 wires
Fan size 80 x 80 x 10.8 mm . It is powered by 12 V , draws up to 0.18 A current. Its rotational speed is 1600 rpm , provides an airflow of 11.2 CFM, operates at a volume...
Heat sink with fan for Odroid XU-4 - blue
Blue heatsink with fan and thermoconductive paste for minicomputer Odroid XU4. The supply voltage of the fan is 5 V / 120 mA.
WiFi 2,4/5,8GHz and Bluetooth 4.2 USB module - Odroid 5BK
Module allowing wireless communication WiFi 2.4 GHz / 5.8 GHz in the 802 . 11 b / g / n / ac standard and Bluetooth 4.2 . It works with a series of Odroid modules...
Odroid HC4-P Transformation Kit - a set with a case and a fan for Odroid HC4 - for self-assembly
Odroid HC4-P Transformation Kit is an innovative self-assembly kit that includes a housing and fan specially designed for the Odroid HC4 board. It provides protection...
M1 SATA drive mounting kit - for Odroid M1 minicomputer
A kit that allows you to mount a 2.5-inch SSD or HDD on Odroid M1 - a single- board minicomputer equipped with a whole range of interfaces. Provides approximately 500...
OLED Display SSD1306 with RTC Module - for Odroid HC4 and HC4-P kit
SSD1306 OLED display with RTC module , intended for installation in the Odroid HC4 board and the HC4-P Kit. It allows you to present data in graphical form, including:...
H2/H3 2 Net Card for Odroid H2/H2+/H3/H3+ 4x Ethernet 2,5Gb
Network card module made by Odroid Hardkernel company. The network card has been developed for the Odroid H2, H2 rev. B, H2+, H3 and H3+ minicomputer. There are four Ethernet...
WiFi network adapter N 150Mbps with antenna
Wireless network adapter, compatible with 802.11 b/g/n, Works with Raspberry Pi 3/2/B+, no need to install drivers for the operating system Raspbian.Offered by us 7-inch touch LCD displays for Odroid give you the opportunity to build a stand-alone projects, such as a portable, multimedia entertainment center or touch-screen game console. The displays communicate with minicomputers via HDMI and micro USB. The display design is based on the Multi-touch technology for comfortable operation. For the Odroid C1+, C2 and XU4, the displays can run on Android and Linux. In addition, the Odroid C2 and C1+ models can be mechanically connected to the displays, creating a small, integrated system of modules that work together.
In order to include wireless communication with external devices to the Odroid minicomputers, we have also included wi-fi cards in the Odroid accessory range. The Mediatek Link RT5370N is a small device with dimensions similar to the smallest flash drive. The card is equipped with a USB connector compliant with the USB 2.0 interface, supports the IEEE 802.11 b/g/n standard, operates at the standard frequency for wi-fi networks, i.e. 2.4 GHz, and enables data transfer at a speed of 150 Mbit/s. It requires a 5V power supply and consumes no more than 0.16A.
Our CloudShell 2 installation kit for Odroid XU4 allows you to build a NAS file server in RAID-0, RAID-1, SPAN and JBOD topologies. The CloudShell-2 server allows the installation of 3.5" HDD/SSD drives. In addition to mounting components such as chassis walls, locking, screws and spacers. It comes with a motherboard with a 2.8" display with 320x240 pixel resolution, an IR receiver, a 15VDC power supply with 4 A current capacity, a cooling fan with a dedicated power module, a 30-pin connector, and a USB 3.0 cable to connect a SATA controller. In addition, the CloudShell 2 design supports the UAS protocol.
