Product description: HPCB 10:1 motor - Pololu 3061
Small, lightweight yet powerful motors from Pololu are used by robot builders as drive units. The units can be powered by up to 9 V, and gain their useful power above 3 V. The optimum voltage for the best power to strength ratio is 6 V.
HPCB 10:1 motor specifications
|
Supply voltage: |
3 V - 9 V |
|
No-load current (6 V): |
120 mA |
|
Current at stopped shaft (6 V): |
1600 mA |
|
No-load speed (6 V): |
3000 rpm |
|
Torque (6 V): |
0.3 kg*cm (0.029 Nm) |
|
Gear ratio: |
9.96:1 |
|
Brushes: |
Carbon, extra strength |
|
Shaft diameter: |
3 mm |
|
Body dimensions: |
24 x 10 x 12 mm |
|
Weight: |
10 g |
|
Double-sided shaft: |
NO |
|
This version has carbon brushes for increased durability. |
Motor dimensions
The motor body is a cuboid with dimensions of 26 x 12 x 10 mm. The gearbox is 9.27 mm long. There is a 3 mm D-shaped shaft at the output. The total mass is about 10 g.
The drawing shows the dimensions of the Pololu micro motor with gearbox.
Accessories for the motor
We offer a range of accessories that work with Pololu micro motors:
- Mounts
Special mounts in white or black have been designed to mount the motors. An extended version and one made of high-strength aluminium are also available.
- Wheels, tracks, hubs, encoders
We also offer wheels and tracks to fit Pololu micro motor shafts. A special version of wheels with speed measuring encoders is also available. Installation of non-standard wheels is facilitated by adapters.
- Motor controllers
The control of direction and rotational speed is possible with the use of DC motor controllers. In the offer there are both integrated circuits for individual soldering and ready to connect, cooperating with kits (eg Arduino) modules.
The shop offers also many other motors.
Useful links |
