Product description: Spectrum Wood Filament 1,75 mm 1 kg - Oak
Wood felt is a wood-like material, it is designed for 3D printing. The diameter of the filament is 1,75 mm. The material is based on pure PLA mixed with natural wood particles. Wood Filament is a 100% organic and biodegradable product. Models made with the use of this material are characterized by a structure similar to chipboard. The product has the color of light oak.
In our offer of filaments you will also find other materials and colors.
Philament Spectrum Wood 1,75 mm 1 kg - Oak.
Main features of Wood material
- Made of biodegradable materials
- Printable with a nozzle of 0.4 mm
- Contains natural wood particles
- Imitates light-colored wood after printing
- Printed model can be sanded and varnished
- Good thermal insulation properties
As the product contains natural wood, each spool of Wood material may vary slightly in colour, as in nature.
Suggested parameters for printing with the felt
| Printing temperature | From 190°C to 220°C |
| Table temperature | 0°C to 45°C |
| Print cooling | Recommended |
| Due to differences in printer construction, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Example printout made of Wood felt.
Technical specification and physical properties of the felt
| Parameter | Range |
|---|---|
| Felt diameter | 1,75 mm |
| Dimensional tolerance of the filament | +/- 0.05 mm |
| Colour | Oak |
| Printing temperature | From 190°C to 220°C |
| Recommended printing speed | From 40 to 70 mm/sec. |
| Spool - material | Wood |
| Spool diameter | 200 mm |
| Spool width | 67 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Density of material | 1.24 g/cm3 |
| Heat distortion temperature | 55°C |
| Tensile strength at break | 53 MPa |
| Tensile strength | 60 MPa |
| Modulus of elasticity | 3,5 MPa |
| Resistance to impact | 16 J/m |
| Net weight | 1 kg |
Useful links |
