Description: Spectrum PLA Thermoactive 1,75 mm 1 kg - Red
Thermoactive PLA material is based on pure PLA with an addition of thermochromic pigment. This additive causes the 3D printer to change its colour under the influence of a specific temperature. The diameter of the filament is 1.75 mm. The material is wound on a transparent spool and vacuum packed.
In the case of Spectrum Thermoactive PLA product, it is the change of colour from red to cream when the surface temperature exceeds 30°C. The red colour returns gradually once the component reaches a lower temperature (below 30°C).
Filament Spectrum PLA Thermoactive 1,75 mm 1 kg - Red.
In our offer of filaments you will also find other materials and colors.
Properties of PLA Thermoactive
- The material is made from biodegradable materials
- Printing is possible without a heated table
- Colour change of the material above 30°C
- Highly resistant to stretching and abrasion
- Printed parts are rigid and easy to handle
- Models do not shrink after cooling
Example printout of PLA Thermoactive.
Suggested parameters for printing with the filament
| Printing temperature | From 190°C to 220°C |
| Heated table | From 0°C to 45°C |
| Printing speed | From 40 to 110 mm/sec. |
| Due to differences in printer construction, the above data should be treated as guidelines, and the relevant values should be determined experimentally. |
Technical specification and physical properties of the felt
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the filament | +/- 0.05 mm |
| Colour | Red |
| Printing temperature | From 190°C to 220°C |
| Heat distortion temperature | 55°C |
| Spool - material | PLA Thermoactive |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Tensile strength at break | 53 MPa |
| Tensile strength | 60 MPa |
| Modulus of elasticity | 3,5 MPa |
| Spool dimensions |
|
| Net weight | 1 kg |
Spectrum PLA Thermoactive 1,75 mm 1 kg - Red
Spectrum PLA Thermoactive is a series of felts, which are characterized by biodegradability, high quality printed surfaces. Printouts created with PLA Thermoactive can be used in a variety of projects, to produce temperature sensors, battery indicators, fuse tester elements, coatings for cups for hot drinks, coatings for kettles and thermostats for other electronic devices.
Useful links |
