Product description: Filament Carbon PLA 1.75 mm 1 kg - Black
Carbon PLA filament by Spectrum for 3D printers in black in the form of a filament wound on spools. The diameter of the material is 1.75 mm , the net weight is 1 kg . The product is hermetically packed with a desiccant. The mounting hole diameter is 52 mm. The product requires a heated bed to properly form prints. Due to its chemical composition, the filament allows you to create prints with high surface quality, hardness and abrasion resistance, additionally, the material provides resistance to warping of the material.
In our offer of filaments you will also find other materials and colors.
Filament Carbon PLA 1.75 mm 1 kg - Black
Features of Carbon PLA filament
- Increased hardness and stiffness compared to PLA
- Increased plasticizing temperature
- Increased resistance to abrasive wear of prints
- Significantly increased compressive strength
- Excellent layer lamination
- Matte print surface
- No shrinkage
Suggested filament printing parameters
| Printing temperature | 190 ° C to 220 ° C |
| Table temperature | from 0 ° C to 45 ° C |
| Print speed | From 40 mm / s to 70 mm / s |
| Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Black |
| Printing temperature | From 40 mm / s to 70 mm / s |
| Table temperature | from 0 ° C to 45 ° C |
| Material density | 1.30 g / cm³ |
| Spool - material | Carbon PLA |
| Spool outer diameter | 200 mm |
| Spool width | 67 mm |
| Mounting hole diameter | 52 mm |
| Package | Cardboard with print |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Spool dimensions | 200 x 52 x 67mm |
| Net weight | 1 kg |
