MP Motor with 75:1 Gear - doublesided shaft - Pololu 2380

Index: PLL-04052 EAN: 5904422332532

Polol's miniature medium-power motor with a 75:1 gearbox, 290 rpm, 1.2 kg*cm (0.11 Nm) torque. It has an extended shaft for mounting speed sensors.

MP Motor with 75:1 Gear - doublesided shaft - Pololu 2380
€23.50
€19.11 tax excl.
Waiting time: 4-6 weeks
Only on request
PayPal payment
Manufacturer: Pololu

Product description: Motor Polol MP 75:1 double-sided shaft

Polol's small, lightweight yet powerful engines are used as drive units by robot constructors. The units can be supplied with voltage up to 9 V, the useful power is above 3 V. The optimum voltage at which the power to strength ratio is best is 6 V. This version has an extended shaft with a length of 4.5 mm, allowing the installation of speed sensors - encoders.

Motor dimensions:

The motor body is a 24 x 10 x 12 mm cuboid. The gearbox is 9.27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.

The drawing shows the dimensions of the Polol micro motor with gearbox.

Accessories

We offer a range of accessories that work with Polol's micro motors:

In the case of micro 1000:1 and 1000:1 HP motors, the mountings do not cover the entire gearbox.

  • Wheels, crawlers, hubs,Encoders
    Our offer also includes wheelsand tracks,matched to themicro engine shafts of Polol. There is also a special version of wheels with speed measuring encoders available. Installation of non-standard wheels is facilitated by adapters.


  • Engine drivers
    Direction and speed control are provided by DC motor controllers. In our offer there are bothintegratedcircuitsforself-soldering and ready to connect, cooperating with sets (e.g. Arduino) modules.

Engine specification Polol MP 75:1

Supply voltage:

3 V - 9 V

Unloaded current (6 V):

40 mA

Current at stopped shaft (6 V):

700 mA

Speed without load (6 V):

290 rpm

Torque (6 V):

1.2 kg*cm (0.11 Nm)

Gear ratio:

75.81:1

Shaft diameter:

3 mm

Body dimensions:

24 x 10 x 12 mm

The weight:

10 g

Two-sided shaft:

YES

Video

Film from the final driveof the winningThe construction called Impact at the Robot Tournament
T-BOT 2013. Our robot has Polol HP micro motors with 10:1 transmission.

There are also many otherenginesin the shop's offer.

Diameter 12 mm
Length 24 mm
Voltage to 3.0 V
Voltage from 9.0 V
Motor - current 250 mA
Motor - gear 75:1
Rotation speed 290 obr/min
Torque 1,2 kg*cm
Mass 10 g
Motor - shaft 3 mm
Motor - 2x shaft yes
Voltage nominal 6.0 V
Package width 0 cm
Package weight 0.01 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: