Product description: Motor MP 210:1 6 V double-sided shaft - Polol 2383
Polol's small, lightweight yet powerful engines are used as drive units by robot constructors. The units can be supplied with voltage up to 9 V, the useful power is above 3 V. The optimum voltage at which the power to strength ratio is best is 6 V. This version has an extended shaft with a length of 4.5 mm, allowing the installation of speed sensors - encoders.
Motor dimensions:
The motor body is a 26 x 10 x 12 mm cuboid. The gearbox is 9.27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.
The drawing shows the dimensions of the Polol micro motor with gearbox.
Accessories
We offer a range of accessories that work with Polol's micro motors:
- Fixings
Special fixtures in whiteorblack have been designed for mounting the motors.Anextendedversion is also available, as well as analuminiumversion with increased strength.
- Wheels,crawlers,hubs,Encoders
Our offer also includeswheelsandtracks, matched to the micro engine shafts of Polol. There is also a special version of wheels with speed measuring encoders available. Installation of non-standard wheels is facilitated byadapters.
- Engine drivers
Direction and speed control are provided by DC motor controllers. In our offer there are bothintegrated circuits forself-soldering and ready to connect, cooperating with sets (e.g. Arduino)modules.
Video
Film from the final driveThe winnerThe construction called Impact at the Robot Tournament
T-BOT 2013. Our robot has Polol HP micro motors with 10:1 transmission.
There are also many otherenginesin the shop's offer.
Engine specifications
|
Power supply voltage: |
3 V - 9 V |
|
Unloaded current (6 V): |
40 mA |
|
Current at stopped shaft (6 V): |
700 mA |
|
Speed without load (6 V): |
100 rpm |
|
Torque (6 V): |
2.6 kg*cm (0.25 Nm) |
|
Gear ratio: |
210:59:1 |
|
Shaft diameter: |
3 mm |
|
Body dimensions: |
26 x 10 x 12 mm |
|
The weight: |
9,5 g |
|
Two-sided shaft: |
YES |
Useful links |
