Motor driver expansion board X-NUCLEO-IHM08M1 for STM32 Nucleo
Index: FAR-15166
- Reduced price
- Promotion
- Reduced price
- Promotion
Filament Fiberlogy Refill Easy PLA 1,75mm 0,85kg - Light green
Index: FLA-17503
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
Promotion
Loading...
Filament Spectrum PLA Pro 1,75mm 1kg - Pearl Bronze
Filament made of PLA-Pro used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg of filament in the color Pearl Bronze.
Index: SPC-11485
Index: SPC-11485
- Reduced price
- Promotion
Filament PLA Pro 1,75mm 1kg - Lavender Violett
Spectrum PLA Pro is a filament for 3D printers. This fiber is fully biodegradable. The fiber diameter is 1.75 mm . The set includes 1 kg of purple filament. Requires a...
Index: SPC-21767
Index: SPC-21767
- Reduced price
- Promotion
Filament Spectrum PLA Pro 1,75mm 1kg - Magenta
Filament from Spectrum PLA Pro is a material based on modified PLA, it has a chemical composition obtained by combining the advantages of PLA and ABS. Filament with high...
Index: SPC-19141
Index: SPC-19141
- Reduced price
- Promotion
Filament Spectrum PET-G MATT 1,75mm 1kg - Deep Black
Filament PET-G by Spectrum in black in the form of a fiber, wound on spools. The diameter of the material is 1.75 mm , the net weight is 1 kg . The product is...
Index: SCP-21791
Index: SCP-21791
- Reduced price
- Promotion
M5Stamp Pico - development module with ESP32-PICO-D4 - 5 pieces - M5Stack
M5Stamp Pico manufactured by M5Stack with ESP32-PICO-D4 microcontroller, 2.4 GHz WiFi / Bluetooth wireless communication, 600 DMIPS, 520 kB SRAM and 4 MB Flash memory. It can...
Index: MSS-20158
Index: MSS-20158
- Reduced price
- Promotion
The Dual Kmeter 13.2 module from M5Stack is a two-channel module for temperature measurement using K-type thermocouples. It is based on the MAX31855KASA+ technology and is...
Index: MSS-22873
Index: MSS-22873
- Reduced price
- Promotion
SparkFun Thing Plus - ESP32-S2 WROOM - SparkFun WRL-17743
A small module equipped with ESP32-S2 WROOM microcontroller with Xtensa LX7 32-bit microprocessor clocked at 240 MHz , which enables WiFi wireless communication. It is...
Index: SPF-19506
Index: SPF-19506
- Reduced price
- Promotion
Filament Fiberlogy PCTG 1,75mm 0,75kg - Gray
PCTG felt in grey color, wound on a spool with a net weight of 0.75 kg. Material does not require heated chamber, which allows to use it in home printers. It provides high...
Index: FLA-19743
Index: FLA-19743
- Reduced price
- Promotion
Filament Polymaker PolyLite PETG 1,75mm 1kg - Green
PolyLite PETG filament by Polymaker is a material with balanced mechanical properties and a very diverse application. It is characterized by resistance to damage and high...
Index: PLM-22714
Index: PLM-22714
- Reduced price
- Promotion
SparkFun Ardumoto - Motor Driver Shield - L298 - hat for Arduino - SparkFun DEV-14129
SparkFun Ardumoto is a shield designed for use with Arduino that allows you to control up to two DC motors . It is equipped with the popular L298 H-bridge, thanks to...
Index: SPF-23852
Index: SPF-23852
- Reduced price
- Promotion
Filament Fiberlogy Impact PLA 1,75mm 0,85kg - Graphite
The PLA Impact filament by Fiberlogy in graphite color is characterized by high resistance to cracking and fracture thanks to high impact strength and better resistance to...
Index: FLA-24704
Index: FLA-24704
- Reduced price
- Promotion
Filament Fiberlogy Impact PLA 1,75mm 0,85kg - Light Green
PLA Impact filament by Fiberlogy in light green . Wound on a spool, it has a mass of 0.85 kg and a diameter of 1.75 mm . Thanks to higher impact strength and resistance to...
Index: FLA-23405
Index: FLA-23405
- Reduced price
- Promotion
ESP32 Thing - Wi-Fi module and Bluetooth BLE - compatible with the Arduino IDE- SparkFun DEV-13907
The module provides communication with wi-fi and Bluetooth BLE, compatible with the Arduino IDE. It has ESP32 system with 520 KB of RAM and 4 MB of Flash memory, 28 GPIO pins,...
Index: SPF-07911
Index: SPF-07911
- On sale!
- Promotion
Print glue Magigoo PRO PP-GF - 50ml
Magigoo PRO PP-GF printing adhesive - 50 ml is a preparation that improves the adhesion of the first 3D print layers , designed for use with polypropylene filaments...
Index: THG-21885
Index: THG-21885
- Reduced price
- Promotion
Aqara Single Switch Module T1 - No Neutral - white - SSM-U02
The small Aqara Single Switch Module T1 relay module is a perfect solution for automating the control of lighting and electrical devices in the home environment. This...
Index: BNA-23674
Index: BNA-23674
- Reduced price
- Promotion
Filament Fiberlogy PCTG 1,75mm 0,75kg - with a reusable spool - Orange
PCTG filament is an excellent alternative to PETG. As a material, it belongs to the same polyester family as PETG. It does not require a heated chamber, which allows you to...
Index: FLA-19602
Index: FLA-19602
- Reduced price
- Promotion
Inventor HAT Mini for Raspberry Pi - PiMoroni PIM672
Inventor HAT Mini is perfect for creating robots, props, moving sculptures and other dynamic Raspberry Pi- based projects. The overlay allows you to connect two motors, four...
Index: PIM-23498
Index: PIM-23498
- Reduced price
- Promotion
A set of eight original Creality nozzles made of the highest quality hardened steel. Thanks to the temperature resistance up to 450°C , they can work with a very wide range...
Index: CRL-22629
Index: CRL-22629
- Reduced price
- Promotion
Converter DC/AC step-up 24VDC / 230VAC 350/500W - sinus - Volt IPS-500
DC/AC step-up converter IPS-500 Volt. Converts 24 V DC to 230 V AC , its maximum continuous power is 350 W , while the current one is 500 W . Additionally, it has a USB...
Index: VLT-16439
Index: VLT-16439
- Reduced price
- Promotion
In-Line wire connector Simet SCS2 - 4mm 32A/450V - Ideal - 100pcs
The SCS2 feed-through quick connector is the perfect solution for expanding connections. Simple plug-and-play assembly with no tools required allows for quick and easy...
Index: SIM-24718
Index: SIM-24718
- Reduced price
- Promotion
Clock Generator Breakout 5P49V60 - Qwiic - SparkFun BOB-15734
SparkFun module based on the 5P49V60 chip . It enables the generation of a wide range of configurable frequencies of different types of signals using a single reference clock....
Index: SPF-21295
Index: SPF-21295
- On sale!
- Promotion
CNC platform for Snapmaker Artisan
Original work table in the form of a fiberboard designed to work with the CNC module included in the Snapmaker Artisan set. It is used as a form of protection for the...
Index: SNM-23447
Index: SNM-23447
- Reduced price
- Promotion
Filament Fiberlogy FiberSmooth 1,75mm 0,5kg - Black
FiberSmooth filament by Fiberlogy in black color , designed for 3D printing. It is easy to process and the obtained prints are characterized by a smooth, glossy...
Index: FLA-22083
Index: FLA-22083
- Reduced price
- Promotion
Toroidal transformer Indel TST20/006 20W 230V/2x14V
Toroidal transformer made by Indel. The primary voltage is 230 V, the secondary is 2 x 14 V. The power is equal to 20 VA.
Index: MOD-07878
Index: MOD-07878
- Reduced price
- Promotion