- New
- New
- Reduced price
- Sale
Set - Creality Hi 3D Printer + 4x Creality Hyper PLA Filament
Index: CRL-27627
- New
- Reduced price
- Pack
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 186
Loading...
ESP32-C6-DevKitM-1-N4 - WiFi/Bluetooth/ZigBee/Thread - development board with ESP32-C6-MINI-1 chip
ESP32-C6-DevKitM-1-N4 is a development board from Espressif based on the ESP32-C6-MINI-1 system. Perfect for Matter-compatible Smart Home applications thanks to support for...
Index: SOC-24607
Index: SOC-24607
SenseCAP Watcher W1-A is an advanced AI assistant , equipped with ESP32-S3 , Himax HX6538 processor, 120° wide-angle camera, microphone, speaker and touch screen. Thanks...
Index: SEE-25676
Index: SEE-25676
Slide switch ESP1010 - straight
Slide switch, straight to print with the size of 10 x 2.5 x 6.5 mm. Pins pitch: 2.54 mm.
Index: UCC-00255
Index: UCC-00255
OpenLog - data logger - SparkFun DEV-13712
The device allows for easy data recording onto the memory microSD card up to 64 GB. Communication is via the serial interface (RX, TX).
Index: SPF-01708
Index: SPF-01708
two-channel h-bridge - SN754410NE
H-bridge - controller based on MOSFET transistors supplied with voltage from 4.5 to 36 V with current capacity up to 2 A.
Index: UCC-02153
Index: UCC-02153
Data Logging - Shield for Arduino - Adafruit 1141
Shield for the Arduino that allows you to save data to the SD card. RTC built-in clock allows to save the exact time. The system communicates via I2C, works with plates Uno R3,...
Index: ADA-02627
Index: ADA-02627
- Discontinued product
NeoPixel Ring - LED RGB ring 12xWS2812 - Adafruit 1643
The ring consists of 12 individually addressed RGB LEDs 5050 with integrated control unit. Module needs one microcontroller output. Outer circle diameter is 37 mm.
Index: ADA-02944
Index: ADA-02944
Graphical color OLED display 0.95 '' (B) 96x64px SPI - straight connectors - Waveshare 10514
0.95" OLED colour display with 96 x 64 px resolution. The screen based on the SSD1331 controller works with voltages of 3.3 V and 5 V and communicates via SPI. It has soldered...
Index: WSR-04432
Index: WSR-04432
Grove - GrovePi+ v3.0 Shield for RaspberryPi 4/3/2/B/B+/A+
Shield for Raspberry Pi is equipped with a w15 4-pin connectors for connecting sensors from the Grove minicomputer series. It cooperates with more than a hundred modules.
Index: SEE-04451
Index: SEE-04451
Flame sensor 760-1100nm - analog - Waveshare 9521
The sensor is used to detect fire. It is powered with the voltage from 3.3 V to 5.3 V. The range of the sensed wave: from 760 nm to 1100 nm. The output is an analog voltage...
Index: WSR-04461
Index: WSR-04461
NTC 110 10kΩ thermistor with cable
The NTC 110 thermistor with the resistance of 10 kΩ. The connecting cable has a length of 50 cm.
Index: SES-04942
Index: SES-04942
Fan 12V 120x120x25mm Molex- red backlight
Fan with 12 V input voltage, current consumption 0,1 A and dimensions 120 x 120 x 25 mm. It has a red backlight. Power supply to the fan is provided by a 30 cm cable...
Index: MOT-05611
Index: MOT-05611
Rotary switch 4-position 3 circuits - 60mm
Rotary switch, 6-state for the case, equipped with 15 contacts. The total height is 60 mm.
Index: UCC-06153
Index: UCC-06153
Eight-segment display x1 - 14mm red - common anode
Single 8-segment display of digits with points and some characters.
Index: LCD-06438
Index: LCD-06438
FeatherWing radio module RFM69 433MHz - pad for Feather - Adafruit 3230
The module from the Feather family is equipped with a 433 MHz RFM69 long-range radio module. It allows data transmission at a distance of up to 500 m , using a piece of...
Index: ADA-07290
Index: ADA-07290
DFRobot Gravity cables - wires for Gravity and LattePanda sensors 10pcs
Wires are used to connect sensors from Gravity series or actuators with a minicomputer Latte Panda, compatible with most gravitational sensors. They are very simple to connect...
Index: DFR-08829
Index: DFR-08829
E-paper E-Ink 2.9'' 296x128px - SPI display module - Waveshare 12956
Module with 2.9" e-paper display with a resolution of 296 x 128 px. Communicates via the SPI interface, e.g. with Arduino or Raspberry Pi.
Index: WSR-09099
Index: WSR-09099
PiUART - USB - USB-UART converter for Raspberry Pi - Adafruit 3589
Miniature shield for Raspberry Pi which is also a converter of USB-UART. Connected directly to GPIO pins. The module also has a power switch. It is compatible with Raspberry Pi...
Index: ADA-09816
Index: ADA-09816
iNode Control Point USB - programmable USB module - RFID system
iNode Control ID works the same as iNode Control Point. All information on the verification of the remote devices is transmitted via USB to the computer. It communicates via...
Index: INO-09947
Index: INO-09947
- Discontinued product
Muscle Wire metal alloy with shape memory - 0.03mm - SparkFun COM-11900
Muscle Wire is a wire made of an alloy of nickel and titanium with the shape memory. It can be bent and model when it is in the martensitic form, it will return to the original...
Index: SPF-10086
Index: SPF-10086
Filament Spectrum PLA 1,75mm 1kg - Lion Orange
Filament made of PLA used as a cartridge for 3D printers and printing pens. The diameter of the cartridge is 1.75 mm. The set contains 1 kg of filament in lion orange color...
Index: SPC-11039
Index: SPC-11039
Filament Spectrum PETG 1.75mm 1kg - Arctic White
Filament made of PETG is used as a cartridge for 3D printers . The diameter is 1.75 mm. The set includes 1kg filament in color Arctic White, length of approx. 340 m. It...
Index: SPC-11047
Index: SPC-11047
Filament Spectrum PETG 1,75mm 1kg - Silver Star
Filament made of PETG is used as a cartridge for 3D printers. The diameter is 1.75 mm. The set includes 1kg filament in color Silver Star, length of approx. 340 m. It requires...
Index: SPC-11050
Index: SPC-11050