- New
- New
- Reduced price
- Sale
- New
Pakiet filamentów Devil Design - czarno-biały PLA + PETG - 10szt.
Index: DEV-27744
- New
- Reduced price
- Pack
- Sale
Sonoff M5-4C-80-F - frame for wall switch M5-80 - quadruple - black
Index: INN-25517
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 47
Loading...
Lanberg Ethernet Patchcord UTP 6 1,5m - blue
Patchcord with a length of 1.5 m in blue color. Cable - twisted pair in category 6 Ethernet with RJ45 connectors installed. It has a cover that protects it from breaking.
Index: IMP-14359
Index: IMP-14359
Cytron MDD10A - dual-channel 30V / 10A motor controller
Two-channel DC motor controller. Continuous current per channel is 10 A (momentary 30 A) . Supply voltage is 5 V to 30 V . The controller works with logical voltage 3.3 V...
Index: CTN-15818
Index: CTN-15818
Temperature sensor and humidity ZigBee ZTH1 Thuja Smart Life
Small size ZigBee ZTH1 humidity temperature sensor, available in white . It is powered by one 3 V CR2450 battery (supplied). It works with ZigBee 3.0. It measures...
Index: REM-16236
Index: REM-16236
Lidar TF Luna- laser distance sensor - 8m - UART/I2C
Very accurate laser sensor measuring distance from 0.2 m to 8 m with an accuracy of 0.06 m . The sensor is powered by 5 V. Lidar TF Luna communicates via UART or I2C...
Index: BEN-16638
Index: BEN-16638
Kanthal A1 resistance wire 0.25mm 23,3Ω/m - 9,1m
Characterized by high temperature resistance, Kanthal A1 resistance wire with a resistance of 23.3 Ω / m. The wire is wound on a spool with a diameter of 0.25 mm and length...
Index: AKS-16662
Index: AKS-16662
Gravity - Analog Waterproof Capacitive Soil Moisture Sensor V2.0 - DFRobot SEN0308
The device is designed to measure soil moisture by means of capacitive detection. DFRobot product has increased water resistance . It can be placed in the soil for a long...
Index: DFR-17377
Index: DFR-17377
Electromagnet pulling 12V 24W 6,5kg
The electromagnet is equipped with a 20 mm long bolt, which after receiving a 12 V voltage signal performs a linear pulling movement. During operation the device consumes...
Index: DNG-17766
Index: DNG-17766
Dust / air quality sensor PM2,5 - 5V UART - PlanTower PMS9103M
The dust sensor module allows you to determine the air quality . It measures the concentration of PM2.5 particles and detects particles with a diameter of 0.3 μm, such as...
Index: PLA-17768
Index: PLA-17768
Temperature and humidity sensor - Sensirion SHT40 - STEMMA AT/Qwiic - Adafruit 4885
Temperature and humidity sensor from Adafruit. Equipped with Sensirion SHT40 chip and STEMMA QT / Qwiic connectors, which facilitate the connection of the sensor with...
Index: ADA-19254
Index: ADA-19254
Gravity - BMI160 6DoF IMU - 3-axis accelerometer and gyroscope - DFRobot SEN0250
A 6-axis inertial motion sensor featuring the Bosch BMI160 MEMS chip. The module integrates a 16-bit 3-axis accelerometer and a 3-axis gyroscope . It is used to measure...
Index: DFR-19380
Index: DFR-19380
JustPi THT CF carbon resistor 1/4W 47Ω - 30pcs.
The set consists of 30 resistors. The elements are designed for THT through-hole mounting. Resistance is 47 Ω and tolerance is 5%.
Index: JUS-20008
Index: JUS-20008
JustPi THT CF carbon resistor 1/4W 56kΩ - 30pcs.
The set consists of 30 resistors. The electronic elements are designed for THT through-hole mounting. Resistance is 56 kΩ and tolerance is 5%.
Index: JUS-20010
Index: JUS-20010
The NC (normally closed) solenoid valve allows you to control the fluid flow by opening the valve after applying 12 V to the connectors. The device is equipped with flat power...
Index: DNG-21689
Index: DNG-21689
SenseCAP T1000-A LoRaWAN Tracker - portable GPS/WiFi/Bluetooth locator - Seeedstudio 114993073
SenseCAP T1000 LoRaWAN Tracker is a compact portable locator that offers precise location tracking both indoors and outdoors. It is equipped with GPS, Bluetooth and WiFi and...
Index: SEE-23895
Index: SEE-23895
GoodRam Flash Drive - USB 3.2 gen. 1 - UNO3 silver - 256GB
USB UNO3 is a practical storage medium that combines durability, functionality and original design. Thanks to the metal casing and COB (Chip on Board) technology, it is...
Index: GDR-24469
Index: GDR-24469
USB type C plug-in module - connector for contact board - Adafruit 5978
Compact module that allows you to use the USB Type-C connector in electronic projects and prototyping. It has solder pads that allow access to all pins of the USB connector....
Index: ADA-25268
Index: ADA-25268
The 32GB microSD card is the perfect choice for Raspberry Pi users. Equipped with the Raspberry Pi OS , it is ready to go right out of the box. The set also includes a...
Index: RPI-25740
Index: RPI-25740
Heat shrink tube 3.2/1.6 red - 10pcs
Diameter before heat shrink: 3.2 mm, diameter after heat shrink: 1.6 mm. Price for 10 x 1 meter.
Index: NSZ-00086
Index: NSZ-00086
Step-Up Voltage Regulator U1V10F5 - 5V 1,2A - Pololu 2564
Step-up converter with 5 V output voltage. Maximum input current up to 1.2 A. Supply voltage in the range 0.5 V - 5.5 V.
Index: PLL-01891
Index: PLL-01891
MiniUSB type B 5 pin - connector for breadboard - Pololu 2593
Connector allows you to connect miniUSB outputs with 5-wire connector type B to the breaboard. Module suitable for standard breadboards and connection cables, available in our...
Index: PLL-02049
Index: PLL-02049
Relay module 4 channels with optoisolation - 10A/250VAC contacts - 5V coil
The module is equipped with four relays JQC-3F with a coil powered with a voltage of 5 V with optical isolation of input and mounting holes. The system allows you to control...
Index: MOD-02579
Index: MOD-02579
Limit switch mini with straight lever - WK320
Switch with a simple lever, length of 17 mm. Maximum working voltage is 125 V and current is 1 A. Items are sold in sets of 5 pieces.
Index: PAS-02842
Index: PAS-02842
DFRobot Gravity - sound sensor - analog
Sound sensor module with analog output. Works with a supply voltage from 3.3 V to 5 V. It enables the determination of the volume or identifying characteristic sounds from the...
Index: DFR-03172
Index: DFR-03172
Ethernet Shield W5100 for Arduino with microSD card reader
Module based on W5100, allowing users of Arduino, a simple way to connect with Ethernet. Works with the Arduino Uno and Mega 2560. It has also a device for reading memory cards...
Index: MOD-03779
Index: MOD-03779