- New
Luxonis Oak-D-Pro PoE - AI set for image recognition - Auto-Focus
Index: LUX-22435
- Reduced price
- Sale
ELECTRONICS - Strona 24
Loading...
Module with the touch button built into the mosaic of the PCB. It is powered with the voltage of 5 V with the digital output signal.
Index: OST-14269
Index: OST-14269
SATA data and power cable for Odroid H2/H3/H4
A set containing SATA cables for the complete connection of an HDD / SDD to a Odroid H2 / H3 / H4 chassis with the possibility of installing the drive. Includes SATA power cord...
Index: ODR-15152
Index: ODR-15152
- Sale
- SPECIAL OFFERS
IR beam interruption sensor - LED 5mm - 0-100cm
The motion sensor reacts to the interruption of infrared light beam transmitted between the transmitter and the receiver . It has a detection range from 0 cm to 100 cm ....
Index: DNG-18691
Index: DNG-18691
Fermion - DFPlayer Pro - 2-channel mini MP3 player with 128 MB built-in memory - DFRobot DFR0768
A two-channel mini MP3 player made by DFRobot. It can be operated in four ways: with Arduino (and related boards), via AT commands, with ADKEY key or physically with...
Index: DFR-19378
Index: DFR-19378
Straight goldpin 1x40 connector with 2,54mm pitch - white - 10pcs. - justPi
Male goldpin plug with a white housing. The pin layout is 1x40, and the pins' pitch is 2.54 mm . The goldpin connector belongs to the group of pin connectors , which are...
Index: JUS-20024
Index: JUS-20024
Wire spool set 30AWG - different colors - 5 pcs - justPi
Set of five spools with 30 AWG wires from justPi. The wires have insulation in different colors: black, yellow, blue, green and red. They were packed in a cardboard box with...
Index: JUS-21083
Index: JUS-21083
LED 5mm blue clear 465-470nm - 5pcs
LED diode 5 mm blue. Transparent lens. Length the interaction of the wave: 465 - 470 nm. Brightness: 6000 mcd. Beam angle: 15 °. Price for 5 pieces.
Index: LED-00540
Index: LED-00540
Numeric keypad, self-adhesive, 12 keys
Simple numeric keyboard with the numbers from 0 to 9 and the signs: * and #. The reverse side has a self-adhesive tape for facilitating the installation.
Index: MOD-01681
Index: MOD-01681
Power LED Star 3 W - green with heat sink
Diode type Power LED green 3W with a heatsink.
Index: LED-02501
Index: LED-02501
Switch ON-OFF square 250V/1A - red
Switch with a square attachment with the contact's loading capacity of 1 A for 250 V or 3 A for 125 V.
Index: UCC-03058
Index: UCC-03058
LED 5mm 12V with resistor and wire - green - 5pcs
Led 5mm green with the included resistor and a wire length of 20 cm. It is supplied with the voltage of 12 V. Items are sold in sets of 5 pieces.
Index: LED-03159
Index: LED-03159
STM32 NUCLEO-F303RE - STM32F303RET6 ARM Cortex M4
Module with 32-bit microcontroller with ARM Cortex M4, 72 MHz, 512 KB of Flash, 80 KB of SRAM. Nucleo is compatible with the mbed platform, it has connectors for connecting the...
Index: DIS-03702
Index: DIS-03702
LED Strip SMD2835 IP20 12W, 120 LED/m, 8mm, warm white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 12 W/m, density of 120 diodes per meter. The color of the light is warm white. Protection factor...
Index: LED-07088
Index: LED-07088
A set of 18 types bipolar transistors in TO92 case, 10 pieces in each.
Index: UCC-07579
Index: UCC-07579
10-segment LED Bar Display OSX10201-GGR1
10-segment LED display, the range of colors: 7 x green, 3 x red. It c an be used for example as a temperature gauge or liquid level.
Index: LED-08169
Index: LED-08169
Transistor N-MOSFET 2N7000 - 10pcs.
Unipolar transistor N-MOSFET THT, 60 V, 0.2 A. Price for 10 pieces.
Index: UCC-08318
Index: UCC-08318
MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered) - Pololu 2967
Stepper motor controller based on MP6500 system. Powered from 4.5 V to 35 V, with a maximum current consumption of 2.5 A per coil. Maximum resolution: 1/8th step. The module...
Index: PLL-12844
Index: PLL-12844
Set of female connectors for Raspberry Pi Pico
A set of goldpin connectors with a 2.54 mm raster . The kit consists of two 1x20 female strips, 1 1x3 female strip and one 1x3 male strip compatible with the GPIO connectors on...
Index: RPI-18863
Index: RPI-18863
Gravity - 2-Channel I2C DAC Module 0-10V - DFRobot DFR0971
Gravity - 2-channel DAC 0-10V I2C module allows you to operate industrial devices with a voltage from 0 V to 10 V. It is supplied with the voltage from 3.3 V to 5 V. It can...
Index: DFR-21993
Index: DFR-21993
Water block for cooling 40x40mm - aluminum heatsink for Peltier cells
Aluminum radiator with dimensions of 40 x 40 x 12 mm, designed to dissipate heat from various types of elements such as CPUs, GPUs, all kinds of integrated circuits, laser...
Index: DNG-22902
Index: DNG-22902
Limit switch mini - WK607 - 5 pcs
A limit switch without a roller. Maximum operating parameters are 125 V and 5 A current.
Index: PAS-00928
Index: PAS-00928
Index: UCC-01432
Carbon monoxide and flammable gases sensor MQ-9 - semiconductor - blue module
The sensor detects the concentration of CO (carbon monoxide) and flammable gases. It has the goldpin pins, pitch of 2,54 mm. It is powered with the voltage of 5 V. It has...
Index: MOD-03029
Index: MOD-03029
Electric cube self-locking 3 pin 2mm 10A/380V
The 3-pin self-locking electrical cube allows for the connection of cables with a voltage of 380 V with a current flow of up to 10 A . The connection grid is 10 mm, the...
Index: KAB-03716
Index: KAB-03716