Switches and buttons - Strona 9
CAP1188 I2C/SPI touch module - 8 buttons - Adafruit 1602
The module with the CAP1188 system that implements 8 of the capacitive touch buttons. Pins can be connected to any of the objects conducting the electric current. The board...DFRobot Gravity Self-Locking Switch
Digital bistable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules. Each press changes its status to opposite.ON-OFF switch monostable - PBW-16BPW - 2A 250V - flat green / red
Monostable flat switch with the green/red backlight. Contact load is 2 A for 250 V.- Sale
- SPECIAL OFFERS
DFRobot Gravity - digital button Tact Switch - white
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.Tuya ZLS2S - touch wall switch - ZigBee - 2-channels
A wall contact switch to control two light circuits. The switch requires only a phase wire. It communicates through the ZigBee protocol version 3 .0, according to the...Joystick adapter - with D-SUB 15 pin connector - I2C - STEMMA QT/Qwiic - Adafruit 5753
A board from Adafruit in the form of an adapter that allows you to quickly introduce a joystick into the project. It has a 15-pin D-SUB connector to which you can connect any...- Reduced price
- SPECIAL OFFERS
Self-powered wireless switch - BLE Beacon - DFRobot TEL0173
Self-powered BLE Beacon wireless switch equipped with a micro power generator and RF circuit that captures the kinetic energy from each press and converts it into...Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions...Rotary switch 4-position 3 circuits - 60mm
Rotary switch, 6-state for the case, equipped with 15 contacts. The total height is 60 mm.Rotary switch 12-position 1 circuits - 60mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 60 mm.Rotary switch 8-position 1 circuit - 30mm
Rotary switch, 8-state for the case, equipped with 9 contacts. The total height is 29.5 mm.ON-OFF switch monostable - PBW-12BPW - 2A / 250V - flat red / green
A flat monostable switch with green/red backlight. Contact load is 2 A for 250 V.- Sale
- SPECIAL OFFERS
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - flat red
A flat monostable switch with the red backlight. Contact load is 2 A for 250 V.ON-OFF switch monostable - PBW-12BPW - 2A / 250V - green
A salient, monostable switch with the green backlight. Contact load is 2 A for 250 V.ON-OFF switch monostable - PBW-16BPW - 2A 250V - green / red
Monostable salient switch with the green/red backlight. Contact load is 2 A for 250 V.- Sale
- SPECIAL OFFERS
Grove - Button - module with a button
The control module from a Grove series. It has a built-in tact-switch system and pull-down resistor. It communicates with the microcontroller through a digital signal.Big Push Button 6cm - blue - inclined
Big flat button with an outer diameter of 6 cm with the built-in LED illuminating the dome.Gravity - LED Button - Green - DFRobot DFR0785-G
Module with round monostable button. It is additionally equipped with a backlight, thanks to a built-in LED located under a transparent cap. When the cap is pressed, the...Qwiic Keypad - 12 Button - SparkFun COM-15290
Keyboard module with ATtiny84 microcontroller . In firmware, the FIFO stack stores the last 15 input data. When the stack is full, all previous input is overwritten. The...Kailh Mechanical Key Switches - Clicky - small mechanical buttons - white - 10pcs. - Adafruit 4955
A set of 10 clicky mechanical switches that can be used for a wide range of projects, e.g. when building a proprietary, non-standard mechanical keyboard. The Clicky button...Tact Switch 6x6mm/8mm DIP - 5pcs.
A small monostable button mounted in a through-hole way - THT with the size: 6x6 mm, height: 8 mm. Price per 5 pieces.Touch button AT42QT1010 - SparkFun module SEN-12041
A module made by SparkFun with a capacitive touch button based on AT42QT1010 system. It is powered with the voltage in the range from 1.8 V to 5 V. It has a digital output...Big Push Button 10cm - green (eko2 version)
Big button with an outer diameter equal to 10 cm. Eko2 buttons can rattle when shaking but they perfectly perform their function.
