- New
- New
- Reduced price
- Promotion
- Reduced price
- Promotion
Adhesive velcro with a buckle for Dualsky 280mm accumulators - 1pc
Index: AKC-08182
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Switches and buttons - Strona 10
Loading...
Lever switch ON-OFF 12V / 20A backlit - blue - Adafruit 3306
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has a blue backlight.
Index: ADA-11416
Index: ADA-11416
Push button 10cm - yellow - flat
Big button with an outer diameter of 10 cm with a built-in yellow LED illuminating the dome.
Index: DNG-12668
Index: DNG-12668
Velleman VMA305 - module with capacitive button
Module with touch, capacitive button which requires a little pressure to activate. The output is the analog signal.
Index: VEL-13021
Index: VEL-13021
Tuya LS3 - touch wall switch - ZigBee - 3-channels
Three-channel wall switch, touch. It allows you to control three light circuits. For proper operation of the switch you only need to connect a phase wire. The switch for...
Index: REM-16917
Index: REM-16917
- Reduced price
- Promotion
Gravity - LED Button - Green - DFRobot DFR0785-G
Module with round monostable button. It is additionally equipped with a backlight, thanks to a built-in LED located under a transparent cap. When the cap is pressed, the...
Index: DFR-20076
Index: DFR-20076
IoT Button with NeoPixel BFF Add-On - button module - for QT Py and Xiao - Adafruit 5666
Module manufactured by Adafruit, on board which placed a 12-mm button and a 3.5-mm RGB NeoPixel LED. The IoT Button with NeoPixel BFF Add-On board is compatible with QT Py and...
Index: ADA-22540
Index: ADA-22540
Big Push Button 10cm - green - SparkFun COM-11275
A large button with an outside diameter of 10 cm, with a built-in LED to illuminate the dome.
Index: SPF-02250
Index: SPF-02250
Big Push Button 10cm - yellow - SparkFun COM-11273
Big button with an outer diameter of 10 cm with a built-in yellow LED illuminating the dome.
Index: SPF-02251
Index: SPF-02251
Rotary switch 4-position 3 circuits - 60mm
Rotary switch, 6-state for the case, equipped with 15 contacts. The total height is 60 mm.
Index: UCC-06153
Index: UCC-06153
Rotary switch 12-position 1 circuits - 60mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 60 mm.
Index: UCC-06154
Index: UCC-06154
Switch ON-OFF KN3(C)-201 250V/6A
A printable lever switch equipped with 4 contacts, rated 6 A / 250 V or 10 A / 125 V. It enables switching on two devices simultaneously. Leads raster is 25 mm, total height...
Index: UCC-08393
Index: UCC-08393
Safety switch ON-OFF mushroom - 23mm
The "mushroom" safety switch with a loading capacity of contacts: 5 A for 250 V.
Index: NSZ-09799
Index: NSZ-09799
Arcade Concave Button 3,5cm - yellow - SparkFun COM-09338
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.
Index: SPF-10080
Index: SPF-10080
ON-OFF bistable switch - PBW-16APS - 2A 250V - flat red round
Flat bistable button with red illumination in the form of the ring. Contact load is up to 2 A for 250 V.
Index: AKS-10813
Index: AKS-10813
Big button with an outer diameter of 6 cm with the built-in LED illuminating the dome.
Index: DNG-10940
Index: DNG-10940
DFRobot Gravity - digital button Tact Switch - white
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-11278
Index: DFR-11278
Transistor switch with adjustable delay - 15A / 30V
The module equipped with transistors powered with the voltage from 5 V to 30 V. T he system allows you to control actuators using microcontroller ports or any development set ....
Index: GRL-12126
Index: GRL-12126
Big Push Button 6cm - red - inclined
Big flat button with an outer diameter of 6 cm with the built-in LED illuminating the dome.
Index: DNG-12297
Index: DNG-12297
Large Arcade Button with LED - 60mm White with lightning
Big button with an outer diameter equal to 6 cm with built-in white LED.
Index: ODS-13774
Index: ODS-13774
Gravity - LED Switch 5x - set of 5x LED backlit buttons - various colors - DFRobot DFR0789
A set consisting of 5 buttons with backlight, for which a built-in LED is responsible. Each diode has a square cap which, when pressed, shines in a different color - red ,...
Index: DFR-21005
Index: DFR-21005
Big Push Button 10cm red - SparkFun COM-09181
Big button with an outer diameter of 10 cm, with built-in LED illuminating the dome.
Index: SPF-02174
Index: SPF-02174
Big Push Button 10cm - blue - SparkFun COM-11274
Big button with an outer diameter of 10 cm with the built-in LED illuminating the dome.
Index: SPF-02252
Index: SPF-02252
Panel for 4x4 keyboard - compatible with LED diodes - SparkFun COM-07835
Keyboard overlay with 4x4 - 16 keys. Under each key, an LED can be mounted in a 3 or 5 mm threaded housing. This allows you to create a backlit key panel.
Index: SPF-02272
Index: SPF-02272
Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions...
Index: MOD-02901
Index: MOD-02901
