Raster connectors have gained and established an important position in the production of electronic devices over many years. The areas of application of these elements reach all branches of electronics, from self-assembly kits and modules for amateurs, through household appliances and consumer electronics, to industrial controllers or medical devices. Their particular advantage is the ease of assembly, good connecting parameters and reliability, resulting from a simple mechanical design. In this category you will find 2.54 mm raster connectors, which can replace popular goldpins and offer a number of additional advantages.
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
M40180H10 lens M12 mount 1,8mm for Arducam cameras - Arducam LN006
Index: ACM-19353
- On sale!
- Promotion
- Reduced price
- Promotion
Connectors - raster 2.54 mm
Loading...
Pin for case raster2.54mm - 10pcs
A set of ten female pins in the socket's case, pitch of 2.54 mm.
Index: KAB-06889
Index: KAB-06889
justPi XH2.54 2p 3p 4p 5 pin 2.54mm Pitch Terminal Kit
JustPi set of JST XH2.54 connectors consisting of 10 sets of plugs and sockets with number of pins: 2 / 3 / 4 / 5 . All connectors are placed in a transparent organizer. The...
Index: JUS-19558
Index: JUS-19558
The JST XH 2.54 mm connector set from justPi contains 260 elements , including 5 sets of plugs and sockets for 6 to 10 pins and 210 female pins for the socket housing. These...
Index: JUS-23834
Index: JUS-23834
The 2-pin plug for printing, the pitch is 2.54 mm. The set includes 5 x 2-pin plugs.
Index: KAB-06776
Index: KAB-06776
2,54 mm - angular plug 4-pin - 5pcs.
The 4-pin angular plug for printing, the pitch is 2.54 mm. The set includes 5 x 4-pin plugs.
Index: KAB-06789
Index: KAB-06789
2,54 mm - socket housing 5-pin - 5pcs.
The 5-pin socket's case for the cable, the pitch is 2.54 mm. The kit includes 5 x 5-pin cases.
Index: KAB-06781
Index: KAB-06781
Connector 2,54 mm - socket housing 2-pin - 5pcs.
The 2-pin socket's case for the cable, the pitch is 2.54 mm. The kit includes 5 x 2-pin cases.
Index: KAB-06784
Index: KAB-06784
Connectors 2,54 mm - socket housing 3-pin - 5pcs.
The 3-pin socket's case on the cable, the pitch is 2.54 mm. The kit includes 5 x 3-pin cases.
Index: KAB-06783
Index: KAB-06783
2,54 mm - socket housing 4-pin - 5pcs.
4-pin socket housing for cable, 2.54 mm pitch. Set includes 5 4-pin housings.
Index: KAB-06782
Index: KAB-06782
2,54 mm - angular plug 2-pin - 5pcs.
Angled 2-pin plug for printing, 2.54 mm pitch. Set includes 5 2-pin plugs.
Index: KAB-06791
Index: KAB-06791
Connector 2,54 mm - socket housing 6-pin - 5pcs.
The 6-pin socket's case on the cable, the pitch is 2.54 mm. The kit includes 5 x 6-pin cases.
Index: KAB-06780
Index: KAB-06780
The 8-pin plug for printing, the pitch is 2.54 mm. The set includes 5 x 8-pin plugs.
Index: KAB-06771
Index: KAB-06771
The 5-pin plug for printing, the pitch is 2.54 mm. The set includes 5 x 5-pin plugs.
Index: KAB-06773
Index: KAB-06773
Connector 2,54 mm - socket housing 10-pin - 5pcs.
The 10-pin socket's case on the cable, the pitch is 2.54 mm. The kit includes 5 x 10-pin cases.
Index: KAB-06778
Index: KAB-06778
10-pin plug for printing, 2.54 mm pitch. Set includes 5 10-pin plugs.
Index: KAB-06770
Index: KAB-06770
The 6-pin plug for printing, the pitch is 2.54 mm. The set includes 5 x 6-pin plugs.
Index: KAB-06772
Index: KAB-06772
4-pin plug for printing, pitch of 2.54 mm. The set includes 5 x 4-pin plugs.
Index: KAB-06774
Index: KAB-06774
DIY Magnetic Connector - Right Angle Three Contact Pins - Adafruit 5360
A set of two magnetic connectors for easy and quick connection of two modules. The connectors were made by Adafruit in the manner of MagSafe. The set includes a male pogo...
Index: ADA-21437
Index: ADA-21437
2,54 mm - angular plug 8-pin - 5pcs.
4-pin, angular plug for printing, pitch of 2.54 mm. The set includes 5 x 8-pin plugs.
Index: KAB-06787
Index: KAB-06787
DIY Magnetic Connector - Right Angle Three Contact Pins - Adafruit 5358
Magnetic connectors allow for simple and quick connection of two modules. They were made by Adafruit like MagSafe, a similar solution can be found in MacBooks and the littleBits...
Index: ADA-21438
Index: ADA-21438
2,54 mm - angular plug 3-pin - 5pcs.
The 3-pin angular plug for printing, the pitch is 2.54 mm. The set includes 5 x 3-pin plugs.
Index: KAB-06790
Index: KAB-06790
2,54 mm - angular plug 12-pin - 5pcs.
The 12-pin angular plug for printing, the pitch is 2.54 mm. The set includes 5 x 12-pin plugs.
Index: KAB-06785
Index: KAB-06785
The 3-pin plug for printing, the pitch is 2.54 mm. The set includes 5 x 3-pin plugs.
Index: KAB-06775
Index: KAB-06775
DIY Magnetic Connector - Right Angle Five Contact Pins - Adafruit 5359
Magnetic connectors facilitate and accelerate the process of joining two modules together. They were made by Adafruit like MagSafe, a similar solution can be found in MacBooks...
Index: ADA-21439
Index: ADA-21439
See also
- Connectors - goldpin
- Pogo Pin
- Electric cubes
- Quick couplings
- DC plugs and sockets
- BNC connectors
- BLS connectors
- ARK connectors
- D-SUB connectors
- Connectors - FSF / FPC ZIF
- Amphenol FCI connectors
- Banana connectors
- Crocodile cables
- Connectors - 4-pin
- RJ network connectors
- USB connectors
- Jumpers
- Wire tips
- SMA connectors
- Mounting connectors
- Connectors - raster 2.5 mm
- 230 V network sockets
- IDC connectors
- Slip connectors
- Molex connectors
- Connectors
Raster connector design
Virtually all typical raster connectors are constructed in a similar way: the connector is a series of metal pins (straight or bent at 90 degrees). These pins are factory placed in a plastic strip-shaped housing, with holes that fit tightly to the shape (cross-section) and size of the pins. Some connectors can be manually split to obtain shorter slats with the number of pins needed, others are indivisible and you need to select the correct lengths of components at the purchase stage. The simplest 2.54 mm raster connectors are goldpins - popular especially in amateur robotics, they work perfectly well in the construction of prototypes, but in finished device designs (especially those intended for mass production) it is better to use connectors with a so-called key - that is, with such a construction of the plastic housing that prevents accidental reverse plugging into the socket. This way it is significantly easier to mount the device and avoid costly mistakes.
Raster 2.54 mm connectors in practice
The raster connectors available in this category are made with housings of bright yellow nylon 66, providing an insulation resistance of 1 GΩ. The components can operate with voltages up to 250 V and current loads (single pin) up to 1 A. The contact resistance does not exceed 30 mΩ, which allows the use of 2.54 mm raster connectors even in precise input circuits of measuring devices. The connectors can be used within a wide temperature range from -25 oC to + 85 oC. The contacts designed for female connector housings can be crimped manually or using special crimping tools, and the wires mating with the contacts can have cross-section from 0,2 mm2 to 0,75 mm2 (i.e. AWG24 to AWG18) and outer diameter from 1,2 mm to 2,1 mm.
Wide offer of 2.54 mm connectors
In our store you will find a wide range of raster connectors with standard 2,54 mm raster (100 mils), which can be successfully used in most places designed for classic goldpins. There are available connectors with number of pins from 2 to 6, as well as bigger elements with 8, 10 and 12 pins. In each case we offer both male sockets for through-hole mounting and female connector housings with terminals (contacts) for crimping on wires. Some sockets are available in an angled version, which allows to significantly reduce the total height of the PCB (in comparison with the PCB dimension of the straight version of such a connector used).