• Reduced price
Pololu HP 150:1 motor shaft on both sides
Pololu HP 150:1 motor shaft on both sides
Pololu HP 150:1 motor shaft on both sides
Pololu HP 150:1 motor shaft on both sides
Pololu HP 150:1 motor shaft on both sides
Pololu HP 150:1 motor shaft on both sides
Pololu HP 150:1 motor shaft on both sides
Pololu HP 150:1 motor shaft on both sides - zdjęcie 1
Pololu HP 150:1 motor shaft on both sides - zdjęcie 2
Pololu HP 150:1 motor shaft on both sides - zdjęcie 3
Pololu HP 150:1 motor shaft on both sides - zdjęcie 4
Pololu HP 150:1 motor shaft on both sides - zdjęcie 5
Pololu HP 150:1 motor shaft on both sides - zdjęcie 6
Pololu HP 150:1 motor shaft on both sides - zdjęcie 7

HP Motor with 75:1 Gear - doublesided shaft - Pololu 2215

Index: PLL-04055 EAN: 5904422306236
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

Pololu's high power miniature motor with 75:1 gearing, has 400 RPM, 1.6 kg*cm (0.15 Nm) of torque. It has an extended shaft to accommodate speed sensors.

€14.28 -25%
€10.71
€8.71 tax excl.

Available, 24 hours shipping!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: Pololu

Product description: Pololu HP 75:1 motor double shaft

Pololu's small, lightweight yet powerful motors are used by robot builders as drive units. The units can be operated with voltages up to 9 V, and have a usable power above 3 V. The optimum voltage, at which the power to strength ratio is most favourable, is 6 V. This version has an extended shaft length of 4.5mm, allowing speed sensors - encoders- to be fitted.

Pololu HP 75:1 motor specifications

Supply voltage:

3 V to 9 V

No-load current (6 V):

120 mA

Current at stopped shaft (6 V):

1600 mA

No-load speed (6 V):

400 rpm

Torque (6 V):

1.6 kg*cm (0.15 Nm)

Gear ratio:

75.81:1

Shaft diameter:

3 mm

Body dimensions:

24 x 10 x 12 mm

Weight:

10 g

Double-sided shaft:

YES

Motor Dimensions:

The motor body is a cuboid with dimensions of 24 x 10 x 12 mm. The gear is 9.27 mm long. There is a 3mm D-shaped shaft at the output. The total mass is about 10 g.

The drawing shows the dimensions of the Pololu micro motor with gearbox.

Accessories

We offer a range of accessories that work with Pololu micro motors:

In the case of the 1000:1 and 1000:1 HP micro motors, the mounts do not cover the entire gearbox.

  • Wheels, tracks, hubs, Encoders
    In our offer you can also find wheels and tracks matching the shafts of Pololu micro engines. There is also available a special version of wheels equipped with speed measuring - encoders. Installation of untypical wheels is facilitated by adapters.

Video

Film from the final drive victorious of the Impact robot at the robot tournament
T-BOT 2013. Our robot is equipped with Pololu HP micro motors with 10:1 gearing.

The shop also offers many other motors.

Diameter 12 mm
Length 24 mm
Voltage to 3.0 V
Voltage from 9.0 V
Motor - current 120 mA
Motor - gear 75:1
Rotation speed 400 obr/min
Torque 1,6 kg*cm
Mass 10 g
Motor - shaft 3 mm
Motor - 2x shaft yes
Voltage nominal 6.0 V

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

You might also like

Wheels 32x7mm - black - 2pcs - Pololu 1087

Set of the plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. They are suitable for engines with Pololu gears.
Index: PLL-00012
Index: PLL-00012
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.06 Price €3.06

Extended micro motor mount - white - 2pcs - Pololu 1089

Extended mounts for the Pololu micro motors. The price is for the two pieces.
Index: PLL-00019
Index: PLL-00019
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.38 Price €4.38

Wheel 60x8mm - black - 2pcs. - Pololu 1420

Set of plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. Suitable for engines with Pololu gears.
Index: PLL-00022
Index: PLL-00022
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.29 Price €4.29

TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713

Polol module with a two-channel direct current motor controller. It is powered from 4.5 V to 13.5 V. Continuous current per channel is 1 A, with both channels connected the...
Index: PLL-00032
Index: PLL-00032
Available, 24h shipping!
(Check quantity)
Regular price €3.85 Price €3.85

Micro Motor Mount - black - 2pcs. - Pololu 989

Black Polol micro motor mounts in black. Price for two pieces.
Index: PLL-00036
Index: PLL-00036
Available, 24h shipping!
(Check quantity)
Regular price €3.94 Price €3.94

Pololu 1415 - set of track wheels 22T

The set includes two pieces of caterpillar belts with 22 teeth each, two drive wheels and two loose-running wheels and their attachment components.
Index: PLL-00150
Index: PLL-00150
Unavailable
Regular price €11.44 Price €11.44
  • EOL

VNH5019 - single-channel 24V / 12A motor controller - Pololu - 1451

Module with ST VNH5019 system working with voltages from 5.5 V to 24 V. Maximum continuous output current is 12 A (momentary: 30 A).
Index: PLL-00456
Index: PLL-00456
Available, 24h shipping!
(Check quantity)
Regular price €80.30 Price €80.30

TB6612FNG - two-channel motor controller

Two-channel bridge H. Continuous current per channel 1.2 A temporary to 3.2 A. Supply voltage up to 15 V. SSOP-24 (SMD) housing.
Index: UCC-00495
Index: UCC-00495
Waiting for confirmation of delivery date
Regular price €2.19 Price €2.19

Customers who bought this product also bought:

32u4 Zumo robot minisumo controller A-Star - KIT compatible with Arduino - Pololu 3124

A fighting educational robot for self-assembly. The platform is compatible with Arduino and has the possibility of programming via USB. The kit includes: main board with...
Index: PLL-03546
Index: PLL-03546
Available
(Check quantity)
Regular price €105.38 Price €105.38

EverActive Silver Line battery R6 AA Ni-MH 2000mAh - 4pcs.

EverActive R6 / AA (big stick) rechargeable battery. Nominal voltage: 1,2 V. Capacity: 2000 mAh.
Index: AKU-04212
Index: AKU-04212
Available, 24 hours shipping!
(Check quantity)
Regular price €5.10 Price €5.10

Ball Caster 3/8'' - plastic - Pololu 950

Lightweight plastic ball in the bowl with a diameter of 3/8 inches, it is used to support the front of the two-wheeled robot.
Index: PLL-00030
Index: PLL-00030
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.40 Price €2.40

Micro Motor Mount - black - 2pcs. - Pololu 989

Black Polol micro motor mounts in black. Price for two pieces.
Index: PLL-00036
Index: PLL-00036
Available, 24h shipping!
(Check quantity)
Regular price €3.94 Price €3.94

DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753

Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...
Index: PLL-02678
Index: PLL-02678
Available, 24h shipping!
(Check quantity)
Regular price €21.78 Price €21.78

40x7mm Wheels - red - Pololu 1453

Set of plastic wheels (2 PCs.) with rubber tyres, providing a high adhesion. Suitable for engines with Pololu gears.
Index: PLL-03744
Index: PLL-03744
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.94 Price €3.94

HDMI 1.4 Black 1080p 1,5m cable

HDMI allows you to connect in accordance with the standard, audio and video devices, including the Rasbperry Pi. The cable in version 1.4 supports resolution up to Full HD,...
Index: KAB-05249
Index: KAB-05249
Unavailable
Regular price €1.74 Price €1.74
  • EOL

Quick couplings UY*2 4CI-2007 - 5 pcs

Quick connectors used to connect two veins of the cables with diameter from 0.35 mm to 0.9 mm (19 - 26 AWG). Gel-filled for protection from corrosion and moisture. Price for 5...
Index: KAB-05373
Index: KAB-05373
Waiting for confirmation of delivery date
Regular price €0.22 Price €0.22

Power supply T5875DV for Raspberry Pi 3B+/3B/2B/Zero - microUSB 5,1V/2,5A - original white

Original power supply for minicomputer Raspberry Pi with a microUSB tip. Cooperates with models 3B+, 3B+ 2B, 1B+, 1B, 1A and Zero and Zero W. Maximum efficiency current is 2.5 A.
Index: ZAS-05629
Index: ZAS-05629
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.78 Price €8.78

1.5 / 10mm insulated end ferrule - 10 pieces

Sleeve end for multiwire copper cables. The maximum conductor cross-section is 1.5 mm2, while the sleeve length is 10 mm. Price for 10 pieces.
Index: KAB-05831
Index: KAB-05831
Unavailable
Regular price €0.20 Price €0.20
  • EOL

2.5/8mm insulated end ferrule - 10pcs

Sleeve end for multiwire copper cables. Maximum vein's cross-section is 2.5 mm2, sleeve length is 8 mm. Price is for 10 pieces.
Index: KAB-05834
Index: KAB-05834
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.29 Price €0.29

Micro Motor Mount - white - 2pcs. - Pololu 1086

Mounts for Pololu micro motors in white color. The price is for the two pieces.
Index: PLL-00025
Index: PLL-00025
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.85 Price €3.85

Products from the same category

HP Motor with 30:1 Gear - Pololu 1093

Miniature high-power Pololu motor with 30: 1 gear, has 1000 rpm, the torque is 0.6 kg * cm (0.059 Nm).
Index: PLL-00730
Index: PLL-00730
Goods pending acceptance - available within a few days
Regular price €15.29 Price €15.29

HP Motor with 1000:1 Gear - Pololu 1595

A miniature high-power engine from Pololu with a 1000: 1 gear, has 32 rpm, the torque is 9.0 kg * cm (0.882 Nm).
Index: PLL-00728
Index: PLL-00728
Available, shipping 24h!
(Check quantity)
Regular price €19.78 Price €19.78

Micro metal gearmotor HP 50:1 630RPM - Pololu 998

Polol's miniature 50:1 high power motor with a 630 rpm gearbox, torque is 1.1 kg*cm (0.107 Nm).
Index: PLL-00064
Index: PLL-00064
Available, 24h shipping!
(Check quantity)
Regular price €13.84 Price €13.84

Micro metal gearmotor HP 10:1 3000RPM - Pololu 999

Polol's miniature 10:1 high power motor with a gearbox, 3000 rpm, 0.22 kg*cm (0.021 Nm) torque.
Index: PLL-00015
Index: PLL-00015
Waiting for confirmation of delivery date
Regular price €13.62 Price €13.62

HP Motor with 50:1 Gear - doublesided shaft - Pololu 2213

Polol's miniature 50:1 high power motor with a 630 rpm gearbox, torque is 1.1 kg*cm (0.107 Nm). It has an extended shaft for mounting speed sensors.
Index: PLL-00037
Index: PLL-00037
Available, 24h shipping!
(Check quantity)
Regular price €14.50 Price €14.50

Micro Gearmotor HP 30:1 1000RPM with Extended Motor Shaft - Pololu 2212

Polol's miniature 30:1 high power motor with a gearbox, 1000 rpm, 0.57 kg*cm (0.056 Nm) torque. It has an extended shaft for mounting speed sensors.
Index: PLL-00010
Index: PLL-00010
Goods pending acceptance - available within a few days
Regular price €16.26 Price €16.26

Micro metal gearmotor HP 298:1 100RPM - Pololu 994

Polol's miniature high-power motor with 298:1 gearbox, 100 rpm, 5.0 kg*cm (0.490 Nm) torque.
Index: PLL-00116
Index: PLL-00116
Available, 24h shipping!
(Check quantity)
Regular price €14.50 Price €14.50

HP Motor with 75:1 Gear - Pololu 2361

A miniature high-power motor by Pololu with a gearbox of 75: 1, has 400 rpm, the torque is 1.6 kg * cm (0.156 Nm).
Index: PLL-00722
Index: PLL-00722
Available, shipping 24h!
(Check quantity)
Regular price €15.29 Price €15.29

HP Motor with 10:1 Gear - doublesided shaft - - Pololu 2211

A miniature high-power motor by Pololu with a 10: 1 gearbox, has 3000 rpm, the torque is 0.3 kg * cm (0.029 Nm). It has an extended shaft that allows the installation of speed...
Index: PLL-00688
Index: PLL-00688
Available, shipping 24h!
(Check quantity)
Regular price €15.62 Price €15.62

Motor with 1000:1 Gear - Pololu 1596

A miniature motor from the low power series by Pololu with a 1000: 1 gearbox, has 14 rpm, the torque is 5.0 kg * cm (0.490 Nm).
Index: PLL-00727
Index: PLL-00727
Available, shipping 24h!
(Check quantity)
Regular price €19.58 Price €19.58

Micro metal gearmotor HP 100:1 320RPM - Pololu 1101

Polol's miniature 100:1 high power motor with a gearbox, 320 rpm, 2.2 kg*cm (0.215 Nm) torque.
Index: PLL-00246
Index: PLL-00246
Available, 24h shipping!
(Check quantity)
Regular price €14.06 Price €14.06

HPCB Motor with 298:1 Gear - Pololu 3069

Polol' s miniature high power engine with durable carbon brushes. It has a 298:1 gearbox, speed is 100 rpm, and torque is 5.0 kg*cm (0.49 Nm).
Index: PLL-04198
Index: PLL-04198
Available, 24h shipping!
(Check quantity)
Regular price €15.29 Price €15.29