- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
PiCowbell CAN Bus - MCP2515 - for Raspberry Pi Pico - Adafruit 5728
Index: ADA-23379
- Reduced price
- Sale
ELECTRONICS - Strona 107
Loading...
ON-OFF bistable switch - PBW-16AS - 2A 250V convex
Bistable convex button with a loading capacity of contacts: 2 A for 250 V.
Index: NSZ-09795
Index: NSZ-09795
Safety switch ON-OFF mushroom - 23mm
The "mushroom" safety switch with a loading capacity of contacts: 5 A for 250 V.
Index: NSZ-09799
Index: NSZ-09799
Monostable array switch - PT-29R - 10A 440V NC 0
Monostable NC panel switch, contact load 10 A for 600 V. Key marking "0".
Index: NSZ-09803
Index: NSZ-09803
Cables, measuring probes for meters - universal angular UT-L09
Cables on the one side ended with the corner banana plugs connectors with the 4 mm in diameter, on the other, with straight banana plugs of 4 mm. Cable length is 100 cm.
Index: KAB-09842
Index: KAB-09842
Arcade Concave Button 3,5cm - yellow - SparkFun COM-09338
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.
Index: SPF-10080
Index: SPF-10080
GSM antenna 3dB SMA male - self-adhesive
Antenna working in the GSM band with a SMA male connector. It works with the frequency of 433 MHz. The power gain is 3 dB. It has a layer of self-adhesive tape. Dimensions: 116...
Index: AKS-10139
Index: AKS-10139
DFRobot Capacitive Touch Kit - a touch kit for Arduino
A kit for self-assembly of the capacitive touch for Arduino. The set consists of three styles of touch sensors: round in the style of iPod; touch keyboard that supports...
Index: DFR-10172
Index: DFR-10172
Semiconductor relay SSR-80A 480VAC / 80A - 32VDC
Solid state relay, single-phase SSR with the AC voltage of 480 V and constant of 32 V. Rated current is 80 A. The device does not create noise when switching.
Index: AKS-10220
Index: AKS-10220
- Sale
- SPECIAL OFFERS
CSI / DSI Extender Thingy for Raspberry Pi camera/display tapes - Adafruit 3671
The board is a great tool that allows you to extend the tape 15-pin pitch of 1 mm CSI for camera or DSI display Raspberry Pi.
Index: ADA-10318
Index: ADA-10318
Photoelectric sensor SPDT E3JK-R4M1 12V IP65 - 4m
Photoelectric transmitting sensor. It detects the objects by the method of reflection. Detection range is up to 4 meters. It has Light-ON operation mode. It is powered with...
Index: AKS-10610
Index: AKS-10610
H3LIS331DL 3-axis accelerometer - module - SparkFun SEN-14480
Sensor H3LIS331DL is a 3-axis digital accelerometer. It allows you to measure acceleration in the configurable ranges. It communicates via the I2C or SPI bus, powered from...
Index: SPF-10870
Index: SPF-10870
Module with sensor BME680 from Bosch, it includes measurement of temperature, humidity, pressure and gases. It is able to measure humidity from 10% to 90% RH , pressure from...
Index: ADA-10872
Index: ADA-10872
Module with green LED, it is equipped with a Gravity connector, it is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11270
Index: DFR-11270
DFRobot Gravity - DS18B20 temperature sensor
Digital temperature sensor DS18B20 with the Gravity interface compatible with Arduino. It works in the range from -55 °C to 125 °C. It is powered with the voltage from 3.3 V...
Index: DFR-11281
Index: DFR-11281
DFRobot Gravity - Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used in, for example, in controllers for games. There is the possibility of detecting movement in two...
Index: DFR-11283
Index: DFR-11283
Grove - LCD display 2x16 characters with RGB backlight
LCD display 2x16 characters with backlight in any color palette RGB. Communicates with the two-wire I2C bus. It is supplied with the voltage from 3.3 V to 5 V. T he kit...
Index: SEE-11326
Index: SEE-11326
A simple tilt sensor with digital output. It operates from 3.3V to 5V and works with Arduino and Raspberry Pi modules.
Index: SEE-11358
Index: SEE-11358
Lever switch ON-OFF 12V / 20A backlit - white - Adafruit 3308
The switch with the lever equipped with 2 contacts with load capacity of 20 A and 12 V. Pins pitch is 24.2 mm, total height is 66 mm. The switch has white backlight.
Index: ADA-11414
Index: ADA-11414
- Sale
- SPECIAL OFFERS
DragonTail - adapter for contact plate for BBC micro:bit - Adafruit 3695
Adapter to connect modules Micro:bit to breadboard. It facilitates adding sensors, motors, buttons, LEDs, etc. The module dimensions are 57 mm x 53.5 mm x 19 mm .
Index: ADA-11420
Index: ADA-11420
Programmer USB AVR Pololu v2.1 - microUSB 3,3V/5V - Pololu 3172
Pololu programmer compatible with with the popular STK500. It can be used to program AVR microcontrollers via the microUSB cable. Version 2 is equipped with two connectors...
Index: PLL-11452
Index: PLL-11452
Camera ArduCam Sony IMX219 8MPx M12 mount - night with lens LS-1820 - for Raspberry Pi
Camera module with sensor Sony IMX219 equipped with a lens LS-1820 - NOIR " to work in the day and at night. It connects into a special connector on a minicomputer Raspberry...
Index: ACM-11723
Index: ACM-11723
Elektromagnes trzymający 12V 280kg
Holding electromagnet is powered with voltage of 12 V. It keeps the weight of 280 kg by standard earth acceleration of 9.8 m/s2. The dimensions of the electromagnet are 250 x...
Index: AKS-11801
Index: AKS-11801
Converter USB-UART FTDI FT2232H-56Q - USB Hi-Speed + interface FIFO
Board with a converter FT2232H-56Q USB Hi-Speed 480Mb/s to UART/FIFO. The device has two interfaces that can be configured for asynchronous or synchronous serial or parallel...
Index: FAR-11939
Index: FAR-11939
DFRobot Gravity - MP3 player - JQ8400-FL UART
Module that allows you to play music files directly from the 8 MB device memory . It supports MP3 and WAV formats. It communicates with the microcontroller via the UART...
Index: DFR-12358
Index: DFR-12358