- New
- New
- Reduced price
- Sale
- New
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
ELECTRONICS - Strona 125
Loading...
Breadboard - 400 holes transparent
Breadboard is used for creating and testing electronic circuits without soldering. Version with 400 cells, the size of 82.5 x 53 mm, with a transparent body. Stripes denoting...
Index: PLY-01143
Index: PLY-01143
LPS331AP - pressure and altitude sensor 126kPa I2C/SPI 3-5V - Pololu 2126
The LPS331AP sensor for measuring pressure in the range of 26 kPa to 126 kPa with an accuracy at the level of ±0.2 kPa. The result of the measurement can be easily changed to...
Index: PLL-01421
Index: PLL-01421
Step-Up/Step-Down Voltage Regulator S7V8F5 - 5V 1A - Pololu 2123
Pulse inverter module. Input voltage 2.7 V to 11.8 V . Output voltage: 5 V. Maximum output current 1 A. Dimensions: 11.5 x 16.5 x 2.54 mm
Index: PLL-01428
Index: PLL-01428
USB-UART FTDI 3,3/5V converter for USB cable
The converter allows for communication between USB and UART interfaces. It allows you to exchange data between a PC and a board with a microcontroller. The module includes a...
Index: MOD-02040
Index: MOD-02040
Step-Up/Step-Down Voltage Regulator S18V20F5 - 5V 2A - Pololu 2574
Step-up/step-down converter with 5 V output voltage. Maximum current 2 A . Power supply 3 V - 30 V.
Index: PLL-02098
Index: PLL-02098
Step-Up/Step-Down Voltage Regulator S18V20ALV - 4-12V 2A - Pololu 2572
Step-up/step-down converter with adjustable output voltage from 4 V to 12 V . Maximum current 2 A. Power supply 2.9 V - 32 V .
Index: PLL-02127
Index: PLL-02127
Ramps 1.4 RepRap driver for 3D printer
Popular driver of 3D printer, adapted to work with Arduino Mega 2560 and stepper motors driver A4988. The system requires a power source with an output voltage of 12 V and...
Index: MOD-02193
Index: MOD-02193
MCP4725 DAC I2C converter - SparkFun BOB-12918
Digital-to-analog converter with I2C interface. The module allows you to receive signal in the form of analog voltage from any microcontroller that has I2C. It is powered with...
Index: SPF-02275
Index: SPF-02275
Connector ZIF, FFC/FPC, horizontal 30 pin, raster 0,5 mm, female upper
FFC/FPC 30-pin connector, horizontal, pitch of 0.5 mm, top contact, surface soldered (SMD).
Index: KAB-02331
Index: KAB-02331
- Sale
- SPECIAL OFFERS
16-channel servo driver, 12-bit PWM I2C - Shield for Arduino - Adafruit 1411
16-channel PWM generator, it is useful when there is not enough outputs of the microcontroller. Allows for i.a.: control of the servos, speed adjustment of motors or change the...
Index: ADA-02448
Index: ADA-02448
Universal double sided 20x80mm board
The board allows you to implement any electronic circuit. The holes have a raster of 2.54 mm, overall dimensions: 20 x 80 mm.
Index: PLY-02716
Index: PLY-02716
Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions...
Index: MOD-02901
Index: MOD-02901
XBee Adapter USB v2.2 - DFRobot DFR0174
USB converter for XBee module. It works with all XBee systems from 1, 2.5 & 3, standard and pro series. Version of the DFRobot company has derived connectors of the UART - RX,...
Index: DFR-03037
Index: DFR-03037
- Reduced price
- SPECIAL OFFERS
APDS-9960 RGB sensor and 3,3V I2C gesture detector - SparkFun SEN-12787
Module with sensor that measures the light intensity of the environment, enables the detection of proximity of an object and recognize hand gestures. With this sensor, you can...
Index: SPF-03065
Index: SPF-03065
Thermometer with external probe and LCD display from -50°C to 80°C - white
Digital sensor with the probe for measuring the outdoor temperature and with the LCD display. It works in the range from - 50 °C to 80 °C. The probe is on a wire with a length...
Index: SES-03160
Index: SES-03160
Ultrasonic distance sensor URM37 v5 2-800cm with temperature correction
Ultrasonic sensor from DFRobot operating in the range from 2 cm to 800 cm. It is powered with the voltage from 3.3 V to 5,5 V. Communication is via serial interface UART (RX,...
Index: DFR-03413
Index: DFR-03413
Speaker YD40 0.25W 50Ohm - 40x16mm
Speaker power 0.25 W, impedance of 50 Ohms, and dimensions of 40 x 16 mm.
Index: EAK-03470
Index: EAK-03470
Simple Servo Trigger Servo Controller - SparkFun WIG-13118
A simple controller allowing the servo to move from position A to B after changing the state on the IN input pin. The position can be adjusted with potentiometers. The system...
Index: SPF-03550
Index: SPF-03550
RC Switch with digital output - Pololu 2801
The module processes the RC signals to a digital on/off status. The board is working with a supply voltage of 2.5 V-5.5 V, maximum output current is 25 mA.
Index: PLL-03733
Index: PLL-03733
RJ45 (6P4C) plug to the phone cable. Price is for 5 pieces.
Index: UCC-03920
Index: UCC-03920
DFRobot Gravity DFR0018 - set of 9 modules with cables for Arduino
A set of 9 popular modules compatible with Arduino boards. It has 7 sensors, including: light, temperature, touch, rotation, vibration sensors, and the button and the module...
Index: DFR-03933
Index: DFR-03933
Si5351A - 160MHz I2C signal generator - Adafruit 2045
The chip features a 25 MHz precision oscillator and PLL loops, which can generate signals from 8 kHz to 160 MHz. The chip works with voltages up to 3 V to 5.0 V, the Vpp value...
Index: ADA-04174
Index: ADA-04174
Logic level transmitter TXB0104 bi-directional, 4-channel - SparkFun BOB-11771
The module allows to exchange the data between systems that use the most popular voltage levels: from 1.2 V to 3.6 V for VCCA inputs, and from 1.65 V to 5.5 V for VCCB inputs....
Index: SPF-04290
Index: SPF-04290
Grove - IR receiver 38kHz 940nm
IR receiver from Grove , operating at a frequency of 38 kHz with a supply voltage from 3.3 V to 5.0 V. Maximum sensitivity is observed for the wave length of 940 nm.
Index: SEE-04419
Index: SEE-04419