Product description: SparkFun Thing Plus Matter - wireless communication module - MGM240P - Qwiic - DEV-20270
SparkFun Thing Plus Matter z is a wireless communication module equipped with the MGM240P chip from Silicon Labs . It enables prototyping and testing of IoT applications based on wireless data transmission. It supports 802.15.4 protocols with Mesh (Thread) and Bluetooth Low Energy 5.3 communication, the module is also ready for integration with the Silicon Labs Matter IoT protocol. Thanks to it, it is possible to connect IoT peripherals with IoT platforms, thus creating one secure and wireless communication protocol. The SparkFun Thing Plus Matter board is also equipped with a Qwiic connector, a Li-Pol battery connector and the MCP73831 system, the MAX17048 system for charging and monitoring the connected battery, and a number of GPIO pins.
SparkFun Thing Plus Matter - communication module - MGM240P - Qwiic - DEV-20270.
Also check the manufacturer's user guide !
The board is equipped with a USB type C connector.
Special features SparkFun Thing Plus Matter
- Built on the EFR32MG24 wireless SoC with a 32-bit ARM Cortext-M33 processor operating at 39 MHz, with 1536 kB Flash memory and 256 kB RAM
- Works with popular wireless protocols 802.15.4 (Matter, Zigbee, OpenThread) and Bluetooth Low Energy 5.3
- Supports Silicon Labs' Secure Vault technology for Thread applications
- It allows the connection between Smart Home devices and IoT platforms without internet connection that come from different vendors
Module technical specification
- Type: wireless communication module
- Built-in communication chip: MGM240P
- Built-in SoC: EFR32MG24
- 32-bit ARM-M33 core processor (39MHz clock)
- Flash memory 1536KB
- RAM memory 256 kB
- Support for multiple 802.15.4 wireless protocols (Zigbee and OpenThread)
- Bluetooth Low Energy 5.3
- Built-in antenna
- 21x leads
- All pins have full multiplexing capability via software
- SPI, I2C and UART interfaces
- 13x GPIOs (including 6x analog)
- Built-in DAC
- USB Type-C connector
- 2-pin JST connector for connecting the Li-Pol battery
- Qwiic JST connector
- Built-in charging chip: MC73831
- Built-in charge indicator chip: MAX17048
- MicroSD memory card slot
- reset button
There is a memory card slot on the back of the module.
