- New
- New
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 81
Loading...
DFRobot Gravity - RTC SD2405 I2C - real time clock module
Module with real time clock SD2405 has a dual power supply system, when there is a lack of the main power supply, the module automatically switches to battery power.
Index: DFR-09380
Index: DFR-09380
Solenoid Valve Mini - 12V 0,04MPa
The device supports control of fluid flow using a computer or microcontroller. The valve is powered by a voltage of 12 V, maximum pressure is 0.04 MPa (0.4 bar).
Index: MOD-09456
Index: MOD-09456
ON-OFF switch monostable - PBW-16BP - 2A 250V flat
Monostable, flat switch with contact rating of 2 A for 250 V.
Index: NSZ-09796
Index: NSZ-09796
5pin 250V electric cube - orange
The electric 5-pin cube that allows to connect the wires with a voltage of 250 V in a simple way, without the need of using the tools.
Index: LEC-09991
Index: LEC-09991
WiFi module ESP-12S ESP8266 Black - 9 GPIO, ADC, PCB antenna
Wi-fi module based on the ESP8266 chip. It works in standard wi-fi 802.11 b/g/n at 2.4 GHz. It is equipped with 16 pins - pitch of 2 mm, 9 of which is GPIO, 1 ADC and UART....
Index: DNG-10704
Index: DNG-10704
Module 8 relays with optoisolation - 10A / 250VAC contacts - 5V coil
The module has eight SRD-12 relay with a coil powered with a voltage of 12 V along with optical isolation of the input and mounting holes. The system allows you to control...
Index: GRL-10915
Index: GRL-10915
DFRobot Gravity v2.0 - relay 1 channel - 277VAC / 16A contacts - 5V coil
Module with relay that allow for the control of the actuators through the ports of the microcontroller. The kit includes a cable adapted to DFRobot IO Expansion Shield.
Index: DFR-11262
Index: DFR-11262
Motion sensor type PIR interface is compatible with Grove series. Object detection is indicated by a digital position in a high pin SIG. The range can be set within the range...
Index: SEE-11343
Index: SEE-11343
DFRobot Gravity - wired pump - peristaltic
Module connecting the PPM motor driver with a peristaltic pump. The control signal is compatible with a signal controlling the servos that can be used with different boards,...
Index: DFR-11460
Index: DFR-11460
Filament Spectrum PLA Pro 1,75mm 1kg - Pacific Blue
Filament made of PLA-Pro used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg of filament in the color Pacific Blue.
Index: SPC-11480
Index: SPC-11480
- Reduced price
- SPECIAL OFFERS
Inductive proximity sensor LJ18A3-5-Z / CY 5mm 10-30V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 5 mm. The object detection...
Index: DNG-11858
Index: DNG-11858
Inductive proximity sensor LJ12A3-2-J / DZ 2mm 90-250VAC
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 2 mmI. It is powered...
Index: DNG-11866
Index: DNG-11866
Touch screen H - capacitive LCD TFT 5'' 800x480px HDMI + USB for Raspberry Pi - Waveshare 14300
Waveshare touchscreen capacitive 5" for the Raspberry Pi with a resolution of 800 x 480 px. Works with any 40-pin version of the Raspberry Pi via HDMI and USB cable. The...
Index: WSR-11933
Index: WSR-11933
Electromagnet pulling 12V 0.4kg
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: DNG-12093
Index: DNG-12093
- Reduced price
- SPECIAL OFFERS
Grove - temperature and humidity sensor DHT11 - Seeedstudio 101020011
The sensor of temperature and humidity DHT11 from the Grove series. The output is a digital signal. The temperature measurement range is from 0 °C to 50 °C and...
Index: SEE-12378
Index: SEE-12378
PVC wire 0.25mm - brown - 250m roll
PVC cable wound up on a roll. It is used, for example, for alarm installation and intercoms. Length is equal to 250 m. The cable is brown.
Index: DNG-12712
Index: DNG-12712
Camera adapter Raspberry Pi Zero - Pi 4B/3B+/3B/2B
Adapter for connecting cameras designed for the Raspberry Pi with CSI connector on the Raspberry Pi 3B+/3B/2B.
Index: ODS-12750
Index: ODS-12750
Camera ZeroCam OV5647 5MPx - fisheye 170 deg - for Raspberry Pi Zero
Module with the camera compatible with Raspberry Pi Zero v1.3. The device has a matrix OV5647 with a resolution of 5 Mpx 2592 x 1944 px, supports HD 1080p at 30 K/sec. Camera...
Index: ODS-12756
Index: ODS-12756
Grove - push button with backlight - red
Module from the Grove is equipped with a button with a yellow led. It is powered with the voltage from 3.3 V to 5 V. It has the Grove connector that allows for the direct...
Index: SEE-13661
Index: SEE-13661
Flame sensor - 760-1100nm - Iduino SE060
The sensor used to detect fire. It is powered with the voltage from 3.3 V to 5 V. The range of the detected wave is from 760 nm to 1100 nm, detection angle is 60 °. The...
Index: OST-14255
Index: OST-14255
Module with reed switch - Iduino SE013
Simple module with contactor controlled by digital pin. Powered by 5 V. There is a 10 kΩ resistor on the board.
Index: OST-14295
Index: OST-14295
High-class 4-channel relay for using the maximum voltage of 250 V and a current of 10 A.
Index: SEE-14418
Index: SEE-14418
Digital DVI-D - HDMI cable with the 1.8 m length, in black color. Model: AK - AV - 11. It is additionally equipped with the ferrite filter which reduces magnetic interference...
Index: RCO-14563
Index: RCO-14563
Grove - LCD display v2.0 2x16 characters with backlight (Black on Red)
Grove module with 2 x 16 characters monochrome LCD display with high brightness backlight. It communicates via the two-row I2C bus. It is powered from 3.3 V to 5 V. A Grove...
Index: SEE-14734
Index: SEE-14734