ELECTRONICS - Strona 98
2,54 mm - angular plug 8-pin - 5pcs.
4-pin, angular plug for printing, pitch of 2.54 mm. The set includes 5 x 8-pin plugs.ArduCam OV7675 0,3MPx 640x480px - camera module
The camera module with the matrix OV7675 0,3 MPx with a resolution of 640x 480 px and a speed of up to 60 frames per second. The device has the lens of 1/9", it communicates...BleBox ParkingSensor - parking sensor with LED RGB controller
Complete module with colored LED lights for assisting parking in garages and parking lots. Green indicates a safe distance, blue - a small distance from the obstacle, and with...- Reduced price
- SPECIAL OFFERS
D-SUB H.D.DIP straight type DE-15F male - 5 pcs.
D-SUB DE-15F male connector for cables used as e.g. VGA connector. Product sold in sets of 5 pieces.Light control sensor MCE35 - 2300W
The sensor is used to turn on and off lights depending on the brightness level of the environment. Its operation i not influence neither by the temperature nor by the...Module with analog-digital multiplexer 74HC4051 - SparkFun BOB-13906
Module with 8-channel multiplexer CD74HC4051 allows you to connect up to 8 signals to a single analog output. The system can work as a demultiplexer and work with digital...DFRobot Gravity: Voice Recorder Module
Vioce recorder module based on ISD1820. It has a built-in microphone and a jack connector for speakers or headphones. Built-in functions allow you to record and playback audio...HeadAmp 2016 set + Noise Reduction
Headphone amplifier is an official product of YouTube channel Noise Reducer. The kit contains a main board with soldered SMD components and a set of THT components for...Rubber gland round 5mm - 10pcs
Rubber grommet with a diameter of 5 mm. Prevents the cable from rubbing through, e.g. the enclosure wall. Suitable for cables from 4mm to 6mm diameter.DFRobot TCS34725 RGB Color Sensor For Arduino
A module that allows you to make the function to determine the color of ambient light. Applied sensor TCS34725 with a LED backlight and a built-in IR filter. It communicates...Quick connector 1-2,5mm - red - 10pcs
Quick connector, allowing to connect the wires with diameter from 1 mm to 2,5 mm without removing the insulation. Items are sold in sets of 10 piecesConnector for LED strips 8mm 2 pin
Connector that allows you to connect two LED strips with a width of 8 mm. It has two pins. Works with LED strips in monochrome.Adapter DC 5.5/2.1mm with switch - 4 plugs
Extension cable with one female 5,5 / 2,1 mm slot and four male 5.5 / 2.1 mm plugs. It has mounted switch on the cable. It can be used, i.a. to power many LED strips from one...Tinycontrol LANKON-094 - relay module 4x10A /coil 5V for GSM/LAN controller - for DIN rail
The module is equipped with 4 RELPOL RM50 relay a coil supplied with a voltage of 5V, with optical isolation input and mounting holes. The system is designed to work with LAN...Car Fuse Set Midi 5-30A - 10pcs
Set of 10 car fuses in MIDI size, with values ranging from 5 A to 30 A.RGB LED strip WS2813 - digital, addressed - IP65 60LED/m, 18W/m, 5V - 5m
Individually addressed RGB LEDs placed on a 5 m panel with a density of 60 LEDs per meter. Each pixel can emit a color from 24-bit palette.TMP102 - I2C temperature sensor - SparkFun SEN-13314
Module with digital TMP102 thermometer in the range from -40 °C to 125 °C, equipped with I2C interface (TWI). The supply voltage ranges from 1.4 V to 3.6 V.Stepper motor driver L9110 12V/0,8A
The driver module uses L9110 chips to control one stepper motor or two DC motors. Supply voltage is from 3 V to 12 V. Continuous current up to 800 mA.Sealed cable gland IP68 - PG7 thread - gray - 5pcs.
Sealed cable gland with the thread of 11.7 mm. Prevents the cable passing through the body wall from rubbing. Designed for wire diameters from 3 mm to 6.5 mm.Memory card SanDisk Ultra 533x microSD 64GB 100MB / s UHS-I class 10
Popular format of memory card micro SD/SDHC card which is used in smartphones, tablets, cameras. Product of class 10 with the UHS-I interface, from SanDisk. Read speed: up to...
