- New
Pakiet filamentów Devil Design - czarno-biały PLA + PETG - 10szt.
Index: DEV-27744
- New
- Reduced price
- Pack
- Sale
- New
- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
SENSORS - Strona 15
Loading...
Laser distance sensor Lidar TFMini-S UART / I2C - 12m
Laser distance sensor that measures precisely from 0.1 m to 12 m with an accuracy of 0.06 m. The blind spot has been reduced to 10 cm. The sensor communicates through the...
Index: BEN-15862
Index: BEN-15862
Gravity - BMI160 6DoF IMU - 3-axis accelerometer and gyroscope - DFRobot SEN0250
A 6-axis inertial motion sensor featuring the Bosch BMI160 MEMS chip. The module integrates a 16-bit 3-axis accelerometer and a 3-axis gyroscope . It is used to measure...
Index: DFR-19380
Index: DFR-19380
Waterproof probe with temperature sensor DS18B20 - 3m - brown - silicone
Waterproof probe is equipped with a digital thermometer DS18B20 with cable with the length of 3 meters. Version with silicone wire is characterized by the greater strength.
Index: DNG-10937
Index: DNG-10937
RFID/NFC MiFare Classic Tag transparent - 13,56MHz - Adafruit 361
The RFID /NFC identifier in the form of a transparent marker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...
Index: ADA-02953
Index: ADA-02953
Gravity - segment display 4-digital I2C - green - DFRobot DFR0645-G
Four-digit, 8-segment Gravity series display with adjustable 8-level brightness levels, The modules are equipped with an I2C port compatible with the Gravity...
Index: DFR-16309
Index: DFR-16309
Inductive proximity sensor LJ12A3-2-Z / AX 2mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 2 mm. The object detection...
Index: DNG-11860
Index: DNG-11860
DFRobot Gravity - analogue EMG sensor, electromyograph -OYMotio.n
The EMG sensor was created through the cooperation of DFRobot and OYMotion. EMG - electromyograph, sensor of electric activity of muscles and peripheral nerves of human. This...
Index: DFR-10833
Index: DFR-10833
Gravity - DHT22 digital temperature and humidity sensor - DFRobot SEN0137
DFrobot's DHT22 digital humidity and temperature sensor module provides precise measurements and has a short response time combined with high reliability and resistance to...
Index: DFR-15760
Index: DFR-15760
Temperature sensor - thermistor NTC-MF52 - Iduino ST1147
Module with temperature sensor equipped with a thermistor NTC-MF52. In order to read values from the sensor, connect it to the analog signal of the microcontroller. It detects...
Index: OST-14322
Index: OST-14322
Tilt / shock sensor - Iduino SE059
The tilt sensor detects changes in position. It can work as a shock sensor. The m odule for communication uses the digital output . It w orks with voltage of 5 V.
Index: OST-14325
Index: OST-14325
Gravity: Analog High Temperature Sensor
Analog sensor of the high temperature, operating in the range from 30 °C to 350 °C. It is powered with a voltage of 3.3 V to 5.5 V. The kit has a PT100 probe.
Index: DFR-06613
Index: DFR-06613
QTR-8A reflectance sensor array- analog - Pololu 960
Strap of the eight reflecting sensors with analog outputs. It is powered with the voltage of 5 V or 3.3 V.
Index: PLL-00152
Index: PLL-00152
DFRobot Gravity - VEML7700 digital ambient light sensor - I2C
The module is compatible with Arduino, equipped with a digital light sensor with a resolution of 16-bit, it is powered with the voltage in the range from 3.3 V to 5.5 V. It...
Index: DFR-09528
Index: DFR-09528
DFRobot Gravity - CO2 carbon dioxide sensor - electrochemical
The sensor determines the concentration of CO2 (carbon dioxide) in the air. It is equipped with digital and analog output that works with voltage of 5 V. The kit includes a...
Index: DFR-04487
Index: DFR-04487
Grove - a set of 5 female-female 4-pin - 2mm/20cm I2C splitters
A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...
Index: SEE-04396
Index: SEE-04396
Module with digital temperature sensor MLX90614ESF-BAA-000-TU-ND
Sensor that uses IR to measure temperature in the range from -70 °C to 380 °C. It is communicating via the I2C bus. The voltage ranges from 3.0 V to 5.0 V.
Index: GRL-13443
Index: GRL-13443
Humidity and Temperature Sensor Breakout - Si7021 - SparkFun SEN-13763
Humidity and temperature sensor powered by the voltage from 1.9 V to 3.6 V with I2C interface. The measurement of temperature is from -10°C to 85°C, humidity from 0 to 80% RH.
Index: SPF-06554
Index: SPF-06554
- Sale
- SPECIAL OFFERS
Inductive proximity sensor LJ12A3-2-J / DZ 2mm 90-250VAC
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 2 mmI. It is powered...
Index: DNG-11866
Index: DNG-11866
Inductive proximity sensor E2S-H4N1 4mm 10-30V
The E2S-H4N Inductive Proximity Sensor allows metal detection up to 4 mm away. It has a 200 cm cable length. The response time is less than 1 ms and the switching...
Index: DNG-17435
Index: DNG-17435
Gravity - segment display 4-digital I2C - red - DFRobot DFR0645-R
4-digit, 8-segment Gravity series display , allows you to adjust the brightness of the displayed characters, thanks to 8-stage adjustment, The device has an I2C port...
Index: DFR-16310
Index: DFR-16310
Waterproof probe with temperature sensor DS18B20 - Okystar - 20m
Waterproof probe with DS18B20 digital sensor. It is powered from 3 V to 5.5 V . The sensor allows to measure temperature of places distant, difficult to reach from the...
Index: OKY-15864
Index: OKY-15864
Velleman WPSE303 - soil moisture sensor + liquid level sensor - analog
A set of two sensors of: soil moisture and liquid's level. Powered with the voltage of 5 V. T he sensor's output is an analogue voltage which increases its value along with the...
Index: VEL-13019
Index: VEL-13019
- Reduced price
- SPECIAL OFFERS
Camera module for Arduino 5 MPx with a resolution of 2592 px x 1944 and speeds up to 120 frames per second. It extends the capabilities of the microcontroller with the ability...
Index: ACM-06558
Index: ACM-06558
Aluminum, lightweight (1.3 g) mounts for Sharp distance sensors GP2Y0A02, GP2Y0A21 and GP2Y0A41. Mounts are equipped with mounting holes for M3 screws. Price includes set of 2...
Index: PLL-07985
Index: PLL-07985