Raspberry Pi constructions can take different forms. They result in technologically advanced systems, but also in simple devices which are sometimes the beginning of the adventure with robotics. Raspberry Pi can be supplemented with various peripheral add-ons, so that we get a design that meets our expectations and provides the right functionality. Proper installation is extremely important for efficient operation, only then will the Raspberry Pi construction be stable. Due to the mounting elements, your Raspberry will gain more possibilities and power. Moreover, they will allow you to avoid many relatively frequent failures, which results in reliable operation and a long life of the hardware. Our offer includes mounting elements for Raspberry Pi, which you can choose according to the specificity and level at which your project is being developed. You will match them to your equipment to further improve its efficiency, performance and reliability. Find accessories that will give your Raspberry even more possibilities than before.
- New
- Reduced price
- Promotion
Royal Resin Crystal epoxy resin dye - pearl liquid - 15 ml - purple
Index: ROY-18844
- Reduced price
- Promotion
Step-Up/Step-Down Voltage Regulator S13V15F5 - 5V 1,5A - Pololu 4084
Index: PLL-21021
- Reduced price
- Promotion
Plastic case for remote control Kradex Z122 IP53 - 108x69x25mm black
Index: KDX-10123
- On sale!
- Promotion
ON-OFF switch monostable - PBW-16BPD - 2A 250V - flat green point
Index: AKS-10817
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Raspberry Pi mounting elements
Loading...
Set of heat sinks for Raspberry Pi - with heat transfer tape - silver - 4pcs.
Set of 4 pieces of silver heatsinks that are 14 x 14 mm , 14 x 10 mm, 9 x 9 mm, 7 x 7 mm. There is double sided, thermally conductive tape on the back of them. They...
Index: DNG-18745
Index: DNG-18745
Set of heat sinks for Raspberry Pi - with heat transfer tape - blue - 4pcs.
The set consists of 4 heat sinks in blue color. The heatsinks are designed to cool Raspberry Pi 4B minicomputer. The upper part of the heatsink consists of ribs. Heat sinks...
Index: DNG-18748
Index: DNG-18748
Raspberry Pi Active Cooler - heatsink + fan for Raspberry Pi 5
The active cooling system is a perfect solution for those who want to run their Raspberry Pi 5 under full load without having to use a case. This system consists of a large...
Index: RPI-23925
Index: RPI-23925
Goldpin 2x20 straight raster 2.54mm - Raspberry Pi
Male goldpin strip 2 x 20 pins. The raster is 2,54 mm in length and 2,54 mm in width - between two strips. Compatible with Raspberry Pi Zero.
Index: KAB-08884
Index: KAB-08884
Set of heat sinks for Raspberry Pi - with heat transfer tape - gold - 4pcs.
The set consists of 4 pieces of gold heatsinks, in sizes 14 x 14 mm , 14 x 10 mm, 9 x 9 mm, 7 x 7 mm. On the back of each one there is double sided, thermally...
Index: DNG-18747
Index: DNG-18747
Set of heat sinks for Raspberry Pi - black with heat transfer tape - 3pcs.
Set of black heat sinks in 3 pieces. They have different sizes, at the back there is a double-sided, thermally conductive tape. They are compatible with Raspberry Pi 4...
Index: DNG-15211
Index: DNG-15211
Female socket 2x20 raster 2,54 mm for Raspberry Pi 4B/3B+/3B/3/B+ - long pins 12mm
40 -pin female strip compatible with the GPIO connector of the Raspberry Pi model 4B/3B+/3B/B+/A+/Zero with extended pins with a length of 12 mm and spacer. Terminal pitch...
Index: UCC-06936
Index: UCC-06936
Set of copper radiators for Raspberry Pi 3/2/B+/Zero with thermal conductance tape
The set includes two radiators, made of copper, which provide cooling for minicomputers Raspberry Pi 3 B, 2 B, B+ and Zero. They are suitable for chips located on the board...
Index: RPI-02893
Index: RPI-02893
RTC Battery for Raspberry Pi 5
The Panasonic ML-2020 RTC battery was designed for Raspberry Pi 5 users who want to ensure uninterrupted operation of the real-time clock built into the board, even when the...
Index: RPI-23926
Index: RPI-23926
Set of heat sinks 2x with thermoconductive tape - black
Set includes two heat sinks in sizes: 14x14mm and 9x9mm. The kit also includes a thermo-conductive tape. They can be used to cool the system of a minicomputer Raspberry Pi...
Index: MOD-09871
Index: MOD-09871
2x20 goldpin plug for Raspberry Pi - colored markings
40-pin goldpin plug is compatible with the GPIO connector on a Raspberry Pi Zero and 2B, 3B, 3B+ and 4B. The plug has a colored marking for individual pins, which facilitates...
Index: ODS-12127
Index: ODS-12127
Heatsink 40x30x5mm for Raspberry Pi 4 with thermoconductive tape - silver
Silver-coloured aluminium heat sink, 40 x 30 x 5 mm. It is a mounting element, compatible with the Raspberry Pi 4 minicomputer, as well as with other electronic circuits. It...
Index: ODS-15694
Index: ODS-15694
Goldpin 2x20 straight raster 2.54mm
Male goldpin strip with 2 x 20 pins. Raster is 2.54 mm in length and 2.54 mm in width - between the two strips. It works with Raspberry Pi Zero among others.
Index: DNG-12659
Index: DNG-12659
Set of heat sinks for Raspberry Pi - silver with heat transfer tape - 3pcs.
Set of 3 pieces of silver heat sinks, which are 9 x 9 mm, 14 x 9 mm, 14 x 14 mm. At the back there is a double-sided, thermally conductive tape. They are compatible with...
Index: DNG-15212
Index: DNG-15212
Fan 5V 30x30x10mm 2 wires - 2pin 2,54mm female connector
Brushless fan with 0,85 W and 5 V voltage. It is made of plastic. It has two 27 cm long cables ended with 2.54 mm two-pin connector . Fan rotation speed is 9582 rpm. Service...
Index: DNG-18679
Index: DNG-18679
Fan 5V 40x40x10mm 2 wires - JST 2pin 2,54mm connector
The brushless fan is powered by 5 volts and has been manufactured from plastic. It has two 28 cm long cables terminated with two-pin JST 2.54 mm connector . Fan rotation...
Index: DNG-18680
Index: DNG-18680
Female socket 2x20 raster 2.54mm for Raspberry Pi 4B/3B+/3B/3 - long pins 10mm
40-pin female connector strip compatible with the GPIO connector of the Raspberry Pi model 4B/3B+/3B/2B/B+/A+ with elongated pins with a length of 10 mm. Raster of the outputs...
Index: UCC-06811
Index: UCC-06811
Fan 5V 50x50x10mm 2 wires - JST 2pin 2,54mm connector
Brushless fan powered by 5V, has been manufactured from plastic. Two 28cm long cables ended with a 2.54mm JST connector are responsible for the power supply. The rotational...
Index: DNG-18682
Index: DNG-18682
Aluminum Heat Sink for Raspberry Pi 3 - 15x15x15mm high
High aluminum heatsink for minicomputer Raspberry Pi 3 in silver, size 15 x 15 x 15 mm.
Index: ODS-13808
Index: ODS-13808
Heatsink 40x30x5mm for Raspberry Pi 4 with thermoconductive tape - black
The 40 x 30 x 5 mm black heat sink is compatible with the Raspberry Pi 4 minicomputer, as well as with other electronic circuits. It has a self-adhesive layer of double-sided...
Index: ODS-15380
Index: ODS-15380
Raspberry Pi Compute Module 5 Passive Cooler
The aluminum heatsink designed specifically for the Compute Module 5 is a reliable cooling solution that ensures optimal thermal performance for key module components....
Index: RPI-25747
Index: RPI-25747
- New
Heatsink 40x30x5mm for Raspberry Pi 4 with thermoconductive tape - red
Aluminium heat sink in red, dimensions 40 x 30 x 5 mm. It is a mounting element, fully compatible with the Raspberry Pi 4 minicomputer, as well as with other electronic...
Index: ODS-15698
Index: ODS-15698
Set of heat sinks for Raspberry Pi with thermoconductive tape - 3pcs.
Set consisting of three heat sinks in blue, copper and gold. They can be used to cool Raspberry Pi 4B / 3B+ / 3B / 2B minicomputer circuits.
Index: GRL-15287
Index: GRL-15287
- On sale!
Mounting Kit 5 for Raspberry Pi - set of nylon screws and spacers M2.5 - 380pcs. - justPi
Mounting Kit 5 is a set of M2.5 screws and spacers that is designed to connect expansion boards to Raspberry Pi . The package includes 380 nylon elements , including...
Index: JUS-23079
Index: JUS-23079
See also
How to install components using Raspberry Pi mounting elements?
You may be an experienced constructor or an aspiring amateur, you may be motivated and have knowledge at different levels, but without the right assembly elements you will not be able to create a stable construction based on Raspberry Pi. Particularly important is the Raspberry Pi, a fourth-generation microcomputer, which enables any integration with a large number of peripheral devices, as well as many options to boost the computing power of the device. This is particularly important if you are planning a highly original and individual project that will create something truly unique and unprecedented. It can be one of the systems of modern monitoring, an intelligent installation in the building, or a weather station, allowing you to control the conditions outside. You don't have to use a soldering iron, which may be a good friend of yours, but working without it can be easier, faster and more effective. Replace it with Goldpin connectors, which will allow you to connect all the components together thoroughly.
Of course, you should always have your soldering iron at hand, but don't give up on extras that are designed for easy and quick installation. You should realize that the enhanced computing power, as well as the intensive work of the device, makes a lot more energy is precipitated and heat is generated in this way. This is particularly dangerous for the processor, which can easily be damaged. The problem is compounded by faulty ventilation and cooling system. For this reason, it is essential to keep a sufficient distance between the boards and the individual installations during installation. For effective heat dissipation, use an additional heatsink with tape support. A special cooling paste will also be useful.
Raspberry Pi mounting elements to back up your equipment
Not only the use of mounting elements and the correct combination of individual components guarantees smooth and safe operation of the hardware. These elements must be of good quality, made of high quality materials, as well as adapted to work in the specific conditions of a microcomputer. We offer assembly elements that have been tested by us and have been previously tested in strict conditions. You can choose from a variety of heat sinks and thermally conductive tapes. With them you can provide individual components as well as the whole device with the right conditions for intensive work. The construction will be stable and thus will work well even with the most advanced projects. With Goldpin connector sets you will be able to perfectly connect individual components without the need for a soldering iron. All this makes creating and constructing even more fun and brings unbelievable satisfaction.