- Reduced price
Product description: Set of Spectrum PLA Premium 1.75 mm 1.25 kg filaments - 5 colors
A set of Premium PLA filaments from Spectrum in 5 different colors : light green, orange, white, blue and black. The total net weight of the materials is 1.25 kg . Each spool is wound with 0.25 kg of material with a diameter of 1.75 mm . The presented product is compatible with 3D printers working in FFF / FDM technology. The filament is fully biodegradable , has very good adhesion and an extremely intense color . Layers remain consistent even at high tilt angles. The properties of PLA Premium make it a perfect training material for people who are just starting their adventure with 3D printing .
Spectrum PLA Premium filament set.
In our offer of filaments you will also find other materials and colors.
The set includes filaments in 5 different colors.
PLA Premium filament properties
- Biodegradable
- Easy to use
- Resistant to stretching
- With a high level of hardness
- With very good adhesion
- Suitable for creating high definition parts
- With low shrinkage
- With a relatively low melting point
Application of PLA Premium
- Educational projects
- Prototypes
- Industrial design
- Visualization of finished and semi-finished products
- Decoration and interior design
- Concept models
A single spool contains 0.25 kg of material with a diameter of 1.75 mm.
Suggested filament printing parameters
| printing temperature | From 185°C to 215°C |
| table temperature | From 0°C to 45°C |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of the filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Filament dimensional tolerance | +/- 0.03mm |
| printing temperature | From 185°C to 215°C |
| Heat distortion temperature | 55°C |
| Tensile strength at breaking point | 53 MPa |
| Tensile strength at yield point | 60 MPa |
| modulus of elasticity | 3.5 MPa |
| Impact resistance | 16 J/m |
| Material density | 1.24g /cm3 |
| Spool - material | Premium PLA |
| Print speed | From 40 to 150mm/sec |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Total Net Weight | 1.25 kg |
