Product description: A set of Spectrum PETG Premium 1.75 mm 1.25 kg filaments - 5 colors
A set of PETG Premium filaments from Spectrum in 5 different colors : light green, orange, white, blue and black. The net weight of all materials is 1.25 kg, a single spool contains 0.25 kg of filament with a diameter of 1.75 mm. The product can be used with 3D printers working in FFF / FDM technology. The filament is durable, has a high level of stiffness and hardness, and is impact resistant. Prints created with PETG Premium retain their properties for a very long time. The filament will prove itself in the production of high-strength elements, while maintaining dimensional accuracy.
A set of PETG Premium filaments in 5 colors.
Each spool contains 0.25 kg of material with a diameter of 1.75 mm.
Properties of PETG Premium
- Chemical resistance
- High dimensional accuracy of printed elements
- No smell
- Acceptable contact with food
- Very low shrinkage
- Low moisture absorption
In our offer of filaments you will also find other materials and colors.
Suggested filament printing parameters
| printing temperature | From 230°C to 255°C |
| table temperature | From 60°C to 80°C |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of the filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Filament dimensional tolerance | +/- 0.03mm |
| printing temperature | From 230°C to 255°C |
| Heat distortion temperature | 55°C |
| Tensile strength at yield point | 26 MPa |
| Tensile strength at breaking point | 48 MPa |
| modulus of elasticity | 1950 MPa |
| Impact resistance at 23°C | 126 J/m |
| Impact resistance at -40°C | 57 J/m |
| Material density | 1.27g /cm3 |
| Material | PETG Premium |
| Print speed | From 40 to 120mm/sec |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Total Net Weight | 1.25 kg |
