Product description: Set of Spectrum PCTG Premium filaments 1.75 mm 1.25 kg - 5 colors
A set of PCTG Premium filaments from Spectrum in 5 different colors : transparent green, orange, white, transparent and black. The total net weight of the set is 1.25 kg . A single spool contains 0.25 kg of material with a diameter of 1.75 mm . PCTG is a great alternative to the PETG material known in the world of 3D printing, it is just as easy to use and resistant to chemicals . However, it has increased impact strength and transparency (in the case of transparent colors). Prints made with PCTG Premium filament in transparent colors can, with a small number of outer contours, achieve an effect close to transparency .
In our offer of filaments you will also find other materials and colors.
Using transparent colors of PCTG Premium filaments, prints can achieve an effect close to transparent.
Features of PCTG Premium
- Chemical resistance
- High dimensional accuracy of printed elements
- Increased impact strength
- Increased transparency
- No smell
- Low shrinkage
- Low moisture absorption
Suggested filament printing parameters
printing temperature | From 250°C to 270°C |
table temperature | From 60°C to 100°C |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of the filament
PARAMETER | RANGE |
---|---|
Filament diameter | 1.75mm |
Filament dimensional tolerance | +/- 0.03mm |
printing temperature | From 250°C to 270°C |
Heat distortion temperature at 0.455 MPa | 76°C |
Heat distortion temperature at 1.820 Mpa | 64°C |
Tensile strength at yield point | 44 MPa |
Tensile strength at breaking point | 46 MPa |
modulus of elasticity | 1600 MPa |
Material density | 1.23g /cm3 |
Material | Premium PCTG |
Print speed | From 40 to 110mm/sec |
Desiccant | Yes |
Vacuum packing | Yes |
Total Net Weight | 1.25 kg |