- New
- Reduced price
- Sale
NeoPixel - LED diode WS2812B / SK6812 8mm - 5szt. - Adafruit 1734
Index: ADA-21059
- Reduced price
- Sale
Sonoff M5-4C-80-F - frame for wall switch M5-80 - quadruple - black
Index: INN-25517
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 146
Loading...
Set of resistors 1/4W 1% - 2500pcs
This set of 50 0.25W carbon film resistor values with a 1% tolerance, 50 of each, is labeled, making it easy to find the correct value.
Index: AKS-12062
Index: AKS-12062
Rocker switch RS203-6C3R - 250V / 16A - red
Rocker switch, 3-position, bistable. It is e quipped with 6 contacts with the load of 250 V / 16. Pins pitch is 11 mm. The size of the switch: 32 x 31,5 x 25 mm.
Index: AKS-12075
Index: AKS-12075
RFID chip - TK4100 125kHz 25mm - with an adhesive layer
Small token - RFID identifier in the form of pill with a diameter of 25 mm. Small size allows for sewing it into clothing or for closing in any case. The carrier frequency is...
Index: DNG-12098
Index: DNG-12098
Set of electronic components + breadboard 830 - E23 - 830 elements
The set of prototype elements that can be used for creating electronic circuits with Arduino. The kit includes: breadboard, power supply for the breadboard, sets of wires,...
Index: GRL-12112
Index: GRL-12112
Transistor switch with adjustable delay - 15A / 30V
The module equipped with transistors powered with the voltage from 5 V to 30 V. T he system allows you to control actuators using microcontroller ports or any development set ....
Index: GRL-12126
Index: GRL-12126
Velleman WPI417 - RFID identification card - 13.56MHz - 10pcs
The RFID identifier in the form of a plastic card with the size of a payment card. Each chip has a unique 32-bit code. The device works at a small distance from the reader,...
Index: VEL-12203
Index: VEL-12203
Extension of the microSD card slot - 48cm
Extension of a slot for microSD cards, for example, in Raspberry Pi, with a ribbon with a length of 48 cm.
Index: DNG-12250
Index: DNG-12250
Extension of the microSD card slot - 25cm
Extension of the slot for microSD cards, for example, in Raspberry Pi with a ribbon of length of 25 cm.
Index: DNG-12251
Index: DNG-12251
Big Push Button 6cm - red - inclined
Big flat button with an outer diameter of 6 cm with the built-in LED illuminating the dome.
Index: DNG-12297
Index: DNG-12297
Big Push Button 6cm - white - inclined
Big flat button with an outer diameter of 6 cm with the built-in LED illuminating the dome.
Index: DNG-12299
Index: DNG-12299
Big Push Button 6cm - green - inclined
Big button with an outer diameter of 6 cm with a built-in LED illuminating the dome.
Index: DNG-12301
Index: DNG-12301
Big button with an outer diameter of 6 cm with the built-in LED illuminating the dome.
Index: DNG-12302
Index: DNG-12302
Concave button with an outer diameter equal to 6 cm with built-in LED illuminating the dome.
Index: DNG-12303
Index: DNG-12303
DFRobot Gravity - 2x16 I2C LCD display - blue
LCD display 2x16 characters with backlight in blue. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.
Index: DFR-12361
Index: DFR-12361
Low Current Sensor ACS723 - 5A current sensor - SparkFun SEN-14544
Current sensor operating in the range from 10 mA to 5 A on the basis of Hall effect. The output is an analog voltage. The supply voltage is 5 V. It has a built-in amplifier and...
Index: SPF-12374
Index: SPF-12374
- Sale
- SPECIAL OFFERS
Camera PixyCam ver. 2.1 CMUcam5 - a smart image sensor - SparkFun SEN-14678
An intelligent image sensor with a built-in processor, thanks to which the robot can find objects. Pixy has support for various devices, e.g. Arduino, Raspberry Pi or...
Index: SPF-12375
Index: SPF-12375
- Sale
- SPECIAL OFFERS
Cytron MD10 - 1-channel motor driver 30V/10A - Shield for Arduino
Shield for Arduino with single-channel driver for DC motors operating with a voltage from 7 V to 30 V and current up to 10 A (short term 15 A). It has NMOS H-Bridge. The board...
Index: CTN-12401
Index: CTN-12401
Cytron Robot Combat Controller URC10 ATmega328P + driver engines 24V/10A compatible with Arduino
Dual-channel DC motor driver. The module can control the direction of rotation, start, stop and speed of the DC motors. Continuous current per 10 A channel (temporary 30 A)....
Index: CTN-12414
Index: CTN-12414
Gravity: ADC converter ADS1115 16-bit - 4-channel
Module made by the Gravity features a 16-bit analog-to-digital converter ADS1115.
Index: DFR-12472
Index: DFR-12472
LED strip RGBCW SK6812 - digital, addressed - IP65 60 LED/m, 18W / m, 5V - 5m
Individually addressed RGBCW LEDs placed on a 1 m panel with a density of 60 LEDs per meter. Pixels other than RGB may also emit shades of white, each pixel can emit color from...
Index: DNG-12488
Index: DNG-12488
LTE GPS HAT - NB-IoT / LTE / GPRS / GPS SIM7000E - for Raspberry Pi 3B+/3B/2B/Zero - Waveshare 14865
Shield for Raspberry Pi that allows you to send text messages in the GSM network. It also has a GPS and LTE module. It communicates via serial interface UART (RX, TX) using the...
Index: WSR-12531
Index: WSR-12531
Camera ZeroCam OV5647 5MPx - wide-angled 120° for Raspberry Pi Zero
Module with the camera compatible with Raspberry Pi Zero v1.3. The device has a matrix OV5647 with a resolution of 5 Mpx 2592 x 1944 px, supports HD 1080p at 30 K/sec. The...
Index: ODS-12748
Index: ODS-12748
Digital-to-analog converter with I2C interface. The module allows you to receive signals in the form of analog voltage on any microcontroller that supports I2C. Powered with...
Index: GRL-12805
Index: GRL-12805
MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered) - Pololu 2969
Stepper motor driver based on MP6500 chip. Powered by a voltage range from 4.5 V to 35 V , with a maximum current consumption of 2 A per coil. Maximum resolution: 1/8 step....
Index: PLL-12843
Index: PLL-12843