- New
M5Stamp Pico DIY Kit - development kit with ESP32-PICO-D4 - M5Stack
Index: MSS-20159
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 173
Loading...
The small PCB produced by Seeedstudio is based on the efficient Nordic nRF52840 ARM Cortex M4 chip with a clock speed of 64 MHz. The board is equipped with wireless...
Index: SEE-21260
Index: SEE-21260
Proximity sensor HSDL-9100-021 60mm
Miniature proximity sensor from Avago Technologies to detect objects at a distance from 0 to 60 mm.
Index: SES-01401
Index: SES-01401
Grove - module with MOSFET transistor
It allows for turning on and off devices that require power from 5V to 15V with a digital signal. Switching frequency up to 5 MHz. It has two mounting holes, two ARK...
Index: SEE-11339
Index: SEE-11339
LTE GPS HAT - LTE / GPRS / GPS SIM7600E-H - for Raspberry 4B/3B+/3B/2B/Zero - Waveshare 14952
Shield for Raspberry Pi that allows you to send text messages and create calls in the GSM network. It also has a GPS module. It supports LTE CAT4 up to 150 Mbps. It...
Index: WSR-12533
Index: WSR-12533
Jetson-Orin-IO-Base Development Board - for Jetson Orin Nano/NX - Waveshare 24726
The Jetson-Orin-IO-Base development board is an advanced artificial intelligence application development device, compatible with Jetson Orin Nano and NX modules. It offers...
Index: WSR-23398
Index: WSR-23398
Keyboard - 2x4 tact switch matrix - Waveshare 3678
The matrix consists of 8 buttons, type tact switch, distributed in four rows and two columns. The signals are displayed out on the 9 popular goldpin connectors - pitch of 2.54...
Index: WSR-04499
Index: WSR-04499
Camera HD Night Vision H OV5647 5Mpx - wide angle IR for Raspberry Pi + IR modules - Waveshare 10703
Module with wide angle camera (160 °) is connected to the selected connector of minicomputer Raspberry Pi version 3, 2, B+, A+ and older A and B. The device has a matrix CCD...
Index: WSR-04523
Index: WSR-04523
Shield for Raspberry Pi with e-paper display of 2.13 " with a resolution of 250 x 122 px. It is connected directly to GPIO pins.
Index: WSR-09097
Index: WSR-09097
Grove - gesture sensor PAJ7620U2 - 5V I2C
Module from the Grove series, is equipped with a gesture sensor PAJ7620U2 with I2C interface. It can recognize 9 basic gestures. It is powered with the voltage of 5 V. It has a...
Index: SEE-11312
Index: SEE-11312
Cytron MD25HV - single-channel DC motor driver - 7V-58V / 25A
A set with a single-channel DC motor controller by Cytron, equipped with a rocker switch for changing the direction of rotation and a potentiometer for speed control. The...
Index: CTN-14813
Index: CTN-14813
Peltier's cell TES1-12710 15,8V/10,5A
Peltier cell supplied with 15.8V . Current consumption is 10.5 A. The dimensions of the board are equal to 40 x 40 x 3.3 mm . It is used e.g. in portable fridges or...
Index: DNG-16371
Index: DNG-16371
JST SH 6 PIN 30cm female cable - Pololu 4763
Female 6-pin JST PH cable with a 1 mm grid . The cable thickness is 28 AWG. Cable length 30 cm , used e.g. to connect Polol magnetic encoders.
Index: PLL-17158
Index: PLL-17158
UART To ETH (B) - UART TTL to Ethernet converter - SMD/THT - Waveshare 24276
A small UART TTL to Ethernet interface converter module from the manufacturer Waveshare. It was designed for integration in industrial devices, IoT and many others. The use...
Index: WSR-23392
Index: WSR-23392
Index: MOT-03868
Eight-segment display x1 - 14mm green - 8 mcd - common cathode
Single 8-segment display which displays digits with a dot and some characters.
Index: LCD-07306
Index: LCD-07306
Module with USB type C socket - connector for breakout board - Adafruit 4090
The module allows for data transfer, connection to the breakout board with configuration pins, security and power supply with connector USB type C. Module is suitable for a...
Index: ADA-13949
Index: ADA-13949
ACHS-7121 Current Sensor Carrier -10A to +10A - Pololu 4030
Current sensor operating in the range from -10 to 10 A based on the Hall effect. The input voltage from 4.5 V to 5.5 V. The sensor is designed to use in systems of 5 V.
Index: PLL-14236
Index: PLL-14236
Extender/Active Terminator LTC4311 - I2C signal amplifier - Adafruit 4756
I2C signal amplifier in the form of Adafruit module. It provides the user with faster data transmission , without the need for additional cables. In addition, it allows...
Index: ADA-18234
Index: ADA-18234
OLED display 1.27'' 128 x 96 px - SPI - 262k RGB colors - Waveshare 24691
The color OLED display from Waveshare is a device that works perfectly with platforms such as Arduino or Raspberry Pi . The built-in SSD1351 driver is responsible...
Index: WSR-23572
Index: WSR-23572
Limit switch switch - WK812 - 5pcs.
Limit switch with a simple lever with a length of 28 mm. Maximum operating parameters is a voltage AC 250 V and a current of 16 A.
Index: PAS-00924
Index: PAS-00924
DRV8834 stepper motor driver Low-Voltage 10,8V 2A - Pololu 2134
Stepper motor controller based on the DRV8834 system allows you to control a motor with a current consumption of up to 1.5 A (momentary up to 2 A) per coil, with voltage from...
Index: PLL-01418
Index: PLL-01418
CSI/DSI Cable Adapter Thingy - for Raspberry Pi - Adafruit 5785
CSI/DSI Cable Adapter Thingy is a board from Adafruit enabling CSI and DSI communication with the Raspberry Pi minicomputer. It has two types of connectors: a 15-pin...
Index: ADA-23817
Index: ADA-23817
Converter ADC MCP3208-CI/P 12-bit 8-channel SPI - DIP
12-bit, 8-channel converter analog-to-digital MCP3208-CI/P in a DIP case with communication interface SPI.
Index: UCC-06507
Index: UCC-06507