DAC to build RS-AMP amplifier - SMD board + THT kit - Noise Reducer
Index: MSX-20857
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
ELECTRONICS - Strona 22
Loading...
50 bright LEDs in red color united in one chain. Each pixel has a diameter of 5 mm, protected by a silicone case, IP65.
Index: LED-09705
Index: LED-09705
Peltier Cell TEC1-12715 12V / 12A
The cooling cell applied, for example, in portable refrigerators. It is supplied with the voltage up to 12 V, it consumes up to 11. 8 A of current. Board sizes - 40 x 40 x 3.3...
Index: DNG-10022
Index: DNG-10022
NTC 10kΩ thermistor with 2m cable
Thermistor of NTC type with a resistance of 10 kΩ. The connecting cable has a length of 2 meters.
Index: DNG-10931
Index: DNG-10931
Rotary potentiometer 501Ohm linear 1/5W B0.5K/B501- 5pcs.
The B0.5K/B501 carbon-coated linear rotary potentiometer has three pin-outs that fit on contact boards. Connected to the microcontroller's analog-to-digital converter (e.g....
Index: DNG-19633
Index: DNG-19633
Set goldpin raster 2.54mm justPi - mini
Goldpin strips allow you to connect with each other systems, modules, sensors. You can also use cables to make connections. The slats in the mini set from justPi are...
Index: JUS-19952
Index: JUS-19952
Quartz resonator 32,768kHz - watch
The resonator quartz of 32.768 kHz in the through hole case in the form of a tube with the size of 2 x 6 mm. Items are sold in sets of 10 pieces.
Index: PAS-00216
Index: PAS-00216
USB Type A plug - plastic - for cable
USB plug type A for soldering the cable in a plastic housing.
Index: KAB-00848
Index: KAB-00848
Raspberry Pi camera ribbon wire - 45cm 15 wires 1mm raster
Tape with a length of 45.7 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-02442
Index: RPI-02442
Logic system CD4026 - digital counter 7-segment decoder THT - 2pcs
The counter and decoder for 7-segment displays. Powered by 3 Volts and 18 Volts in THT case - DIP16. Items are sold in sets of 2 pieces.
Index: UCC-02557
Index: UCC-02557
Grove - Base Shield v2 - Shield for Arduino
Shield for Arduino, which extends the capabilities I/O pins. Designed for modules and sensors from the Grove series. It has 4-pin connectors, and all the outputs known from...
Index: SEE-04440
Index: SEE-04440
Arcade Push Button 3,3cm black case - white with backlight
Button with an outer diameter of 33 mm and height of 60 mm with integrated LED illuminating the dome in the white color. To the button attached is a simple limit switch.
Index: SWT-05284
Index: SWT-05284
Eight-segment display - 14mm red - common cathode
Single 8-segment display of digits with points and some characters.
Index: LCD-06448
Index: LCD-06448
Encoder with button - 24 impulse 12mm - EC12 vertical - 5pcs.
The encoder-style knob and button allow for the creation of a simple user interface. The module sends a digital signal to two pins, depending on the direction of rotation.
Index: MOD-06909
Index: MOD-06909
Logic system CD4069UBE - 6x inverter - 2pcs
Logic system 6 x inverter with working voltage from 3 V to 18 V, in the DIP 14 case. Items are sold in sets of 2 pieces.
Index: UCC-07284
Index: UCC-07284
Adapter to connect the cable with the SMA female end with the SMA female slot.
Index: KAB-08083
Index: KAB-08083
Index: LED-08186
LED indicator 230V AC - 12mm - white
LED light, operating voltage 230 V AC. It has a diameter of 12 mm.
Index: LED-08998
Index: LED-08998
DFRobot Gravity - analog sensor of TDS, purity of water for Arduino
Analog TDS sensor compatible with Arduino, it is used for measuring the hardness and the purity of water. It can be used to test the quality of water in households, hydroponic...
Index: DFR-10830
Index: DFR-10830
Cytron MD10C - single-channel 30V / 13A motor controller
Single channel DC motor controller. Continuous current per channel 13 A (momentary 30 A). Supply voltage from 5 V to 30 V .
Index: CTN-12397
Index: CTN-12397
IDC adapter 10pin 1.27mm - Molex PicoBlade 1.25mm + v2 connectors for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on Molex PicoBlade connector with a pitch of 1.25 mm and has four soldered goldpin pins of 2.54 mm....
Index: DNG-13746
Index: DNG-13746
LED 5mm yellow - 10pcs. - justPi
Set of 10 pieces of yellow LEDs. The diameter of the lens is 5 mm. The diodes emit radiation in the visible light range. They are designed for THT through-hole mounting. The...
Index: JUS-19993
Index: JUS-19993
Set of M3 spacers - set E - 80pcs. - justPi
A set of M3 copper spacers . The elements enable the attachment of e.g. printed circuit boards, brackets and modules. They allow you to keep the same distances when...
Index: JUS-22372
Index: JUS-22372
Prototype boards for Flipper Zero 3pcs.
Prototype boards for Flipper Zero that have been specially designed for direct connection to GPIO connectors. They allow you to control them without the need for...
Index: LAB-24100
Index: LAB-24100
Darlington TIP122 100V/5A NPN bipolar transistor - 5pcs.
The TIP122 is an NPN Darlington bipolar transistor that supports a collector current of up to 5 A and a collector-emitter voltage of up to 100 V , offering a high current...
Index: DNG-25090
Index: DNG-25090