ELECTRONICS - Strona 23
Set of M3 spacers - set E - 80pcs. - justPi
A set of M3 copper spacers . The elements enable the attachment of e.g. printed circuit boards, brackets and modules. They allow you to keep the same distances when...Prototype boards for Flipper Zero 3pcs.
Prototype boards for Flipper Zero that have been specially designed for direct connection to GPIO connectors. They allow you to control them without the need for...Darlington TIP122 100V/5A NPN bipolar transistor - 5pcs.
The TIP122 is an NPN Darlington bipolar transistor that supports a collector current of up to 5 A and a collector-emitter voltage of up to 100 V , offering a high current...Male pin for case raster 5,08mm 10pcs
A set of ten male pins for the slot's case, pitch of 5,08 mm.Distance sensor, reflective 3,3V/5V - 30mm - Waveshare 9523
The reflective module with IR sensor equipped with digital and analog output. It works with a voltage from 3 V to 5.3 V. It enbales the detection of obstacles in the range from...UART Converter - RS485 3.3V - ARK/RJ11 - Waveshare 4777
Converter allows you to connect the microcontroller via the RS-485 bus which supports up to 32 devices on a line length up to 1 km with a speed up to 10 Mbps. The module is...Arcade Push Button 3,3cm black case - yellow with backlight
Button with an outer diameter of 33 mm and height of 60 mm with integrated LED illuminating the dome in the yellow color. To the button attached is a simple limit switch.Ring LED RGB WS2812B 5050 x 24 diodes - 90mm
A ring of 24 individually addressable 5050 RGB LEDs with integrated driver. One pin of the microcontroller is enough to operate the module. The outer diameter of the circle is...Optoisolation relay module 6 channel - 10A/250VAC contacts - 5V coil
The module has six SRD-05VDC-SL-C relays with a coil powered with a voltage of 5 V along with optoelectronic insulation. The system allows you to control actuators with...Pin for socket 2,00mm - 10pcs.
A set of ten female pins slot's case, pitch of 2.00 mm.Magnetic sensor - reed contact CMD1263 + screws
Wired proximity sensor activated magnetically. Case dimensions - 12 x 63 mm.Barrier strip for PCBs, 3-pin, 8.5mm raster
Barrier strap for PCB, 3-pin, with a pitch of 8.5 mm, the maximum voltage for the contacts is 300 V and current is 20 A.Connector goldpin 1x40 angular 2,54mm raster - black - 10pcs. - justPi
Male goldpin plug with pins angled out. The pin arrangement is 1x40 single row . The pins' pitch is 2.54 mm , and the plug housing is black . The goldpin connector...LED 5mm holder - nylon long - 10pcs
Long nylon LED holder 5 mm. The subject of the sale is the holder , the LEDs can be purchased separately. Price of 10 pcs.Zener diode 1.3W 5.1V - 10pcs.
Zener diode with a power of 1.3 W and a voltage of 5.1 V. The set includes 10 pieces.LED Strip SMD3528 IP20 4.8W, 60 LEDs/m, 8mm, cold color - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 4.8 W/m, density of 60 diodes per meter. The light color is cold white, protection factor IP20....LED diode 3mm blue flashing clear - 5pcs
LED diode 3 mm blue flashing. Transparent lens. Price for 5 pieces.Relay module 2 channels H/L with optoisolation - 10A/250VAC contacts - 5V coil
The module has two SRD-05 relays with the coil powered with the voltage of 5 V with optical isolation of the input and mounting holes. The system allows you to control...LED Strip SMD 2835 IP65 9,6W, 120 LED/m, 8mm, cold white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 9.6 W/m, density of 120 diodes per meter. The color of the light is cold white. Protection...LED 5mm white clear flashing - 10pcs
LED diode 5 mm white, flashing. Transparent lens. Brightness: 60 MKD. Light beam angle: 30°. Price for 10 pieces.On-Off switch KCD5 250V / 6A - black
Switch, type On-Off. The load capacity of the contacts is 250 V / 15 A.
