- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 112
Loading...
Step-Up/Step-Down Voltage Regulator S18V20ALV - 4-12V 2A - Pololu 2572
Step-up/step-down converter with adjustable output voltage from 4 V to 12 V . Maximum current 2 A. Power supply 2.9 V - 32 V .
Index: PLL-02127
Index: PLL-02127
two-channel h-bridge - SN754410NE
H-bridge - controller based on MOSFET transistors supplied with voltage from 4.5 to 36 V with current capacity up to 2 A.
Index: UCC-02153
Index: UCC-02153
MCP4725 DAC I2C converter - SparkFun BOB-12918
Digital-to-analog converter with I2C interface. The module allows you to receive signal in the form of analog voltage from any microcontroller that has I2C. It is powered with...
Index: SPF-02275
Index: SPF-02275
16-channel servo driver, 12-bit PWM I2C - Shield for Arduino - Adafruit 1411
16-channel PWM generator, it is useful when there is not enough outputs of the microcontroller. Allows for i.a.: control of the servos, speed adjustment of motors or change the...
Index: ADA-02448
Index: ADA-02448
Universal double sided 20x80mm board
The board allows you to implement any electronic circuit. The holes have a raster of 2.54 mm, overall dimensions: 20 x 80 mm.
Index: PLY-02716
Index: PLY-02716
Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions...
Index: MOD-02901
Index: MOD-02901
NeoPixel Ring - LED RGB ring 12xWS2812 - Adafruit 1643
The ring consists of 12 individually addressed RGB LEDs 5050 with integrated control unit. Module needs one microcontroller output. Outer circle diameter is 37 mm.
Index: ADA-02944
Index: ADA-02944
XBee Adapter USB v2.2 - DFRobot DFR0174
USB converter for XBee module. It works with all XBee systems from 1, 2.5 & 3, standard and pro series. Version of the DFRobot company has derived connectors of the UART - RX,...
Index: DFR-03037
Index: DFR-03037
APDS-9960 RGB sensor and 3,3V I2C gesture detector - SparkFun SEN-12787
Module with sensor that measures the light intensity of the environment, enables the detection of proximity of an object and recognize hand gestures. With this sensor, you can...
Index: SPF-03065
Index: SPF-03065
Thermometer with external probe and LCD display from -50°C to 80°C - white
Digital sensor with the probe for measuring the outdoor temperature and with the LCD display. It works in the range from - 50 °C to 80 °C. The probe is on a wire with a length...
Index: SES-03160
Index: SES-03160
Ultrasonic distance sensor URM37 v5 2-800cm with temperature correction
Ultrasonic sensor from DFRobot operating in the range from 2 cm to 800 cm. It is powered with the voltage from 3.3 V to 5,5 V. Communication is via serial interface UART (RX,...
Index: DFR-03413
Index: DFR-03413
Speaker YD40 0.25W 50Ohm - 40x16mm
Speaker power 0.25 W, impedance of 50 Ohms, and dimensions of 40 x 16 mm.
Index: EAK-03470
Index: EAK-03470
Simple Servo Trigger Servo Controller - SparkFun WIG-13118
A simple controller allowing the servo to move from position A to B after changing the state on the IN input pin. The position can be adjusted with potentiometers. The system...
Index: SPF-03550
Index: SPF-03550
RC Switch with digital output - Pololu 2801
The module processes the RC signals to a digital on/off status. The board is working with a supply voltage of 2.5 V-5.5 V, maximum output current is 25 mA.
Index: PLL-03733
Index: PLL-03733
DFRobot Gravity DFR0018 - set of 9 modules with cables for Arduino
A set of 9 popular modules compatible with Arduino boards. It has 7 sensors, including: light, temperature, touch, rotation, vibration sensors, and the button and the module...
Index: DFR-03933
Index: DFR-03933
Si5351A - 160MHz I2C signal generator - Adafruit 2045
The chip features a 25 MHz precision oscillator and PLL loops, which can generate signals from 8 kHz to 160 MHz. The chip works with voltages up to 3 V to 5.0 V, the Vpp value...
Index: ADA-04174
Index: ADA-04174
Logic level transmitter TXB0104 bi-directional, 4-channel - SparkFun BOB-11771
The module allows to exchange the data between systems that use the most popular voltage levels: from 1.2 V to 3.6 V for VCCA inputs, and from 1.65 V to 5.5 V for VCCB inputs....
Index: SPF-04290
Index: SPF-04290
Grove - IR receiver 38kHz 940nm
IR receiver from Grove , operating at a frequency of 38 kHz with a supply voltage from 3.3 V to 5.0 V. Maximum sensitivity is observed for the wave length of 940 nm.
Index: SEE-04419
Index: SEE-04419
Graphical color OLED display 0.95 '' (B) 96x64px SPI - straight connectors - Waveshare 10514
0.95" OLED colour display with 96 x 64 px resolution. The screen based on the SSD1331 controller works with voltages of 3.3 V and 5 V and communicates via SPI. It has soldered...
Index: WSR-04432
Index: WSR-04432
Flame sensor 760-1100nm - analog - Waveshare 9521
The sensor is used to detect fire. It is powered with the voltage from 3.3 V to 5.3 V. The range of the sensed wave: from 760 nm to 1100 nm. The output is an analog voltage...
Index: WSR-04461
Index: WSR-04461
NTC 110 10kΩ thermistor with cable
The NTC 110 thermistor with the resistance of 10 kΩ. The connecting cable has a length of 50 cm.
Index: SES-04942
Index: SES-04942
LSM6DS33 - 3-axis accelerometer and I2C/SPI gyroscope - Pololu 2736
Sensor allows you to measure 6 variables: acceleration X, Y, Z and angular velocity X, Y, Z. It is a combination of 3-axis accelerometer and gyroscope. It communicates via the...
Index: PLL-05331
Index: PLL-05331
MinIMU-9 v5 9DOF - accelerometer, gyroscope and magnetometer I2C - Pololu 2738
The sensor allows to measure 9 sizes: acceleration X, Y, Z magnetic field X, Y, Z and angular velocity X, Y, Z. It is a combination of 3-axis accelerometer and gyroscope...
Index: PLL-05528
Index: PLL-05528
Fan 12V 120x120x25mm Molex- red backlight
Fan with 12 V input voltage, current consumption 0,1 A and dimensions 120 x 120 x 25 mm. It has a red backlight. Power supply to the fan is provided by a 30 cm cable...
Index: MOT-05611
Index: MOT-05611