- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
DRV8801 - single-channel motor controller 36V / 1A - Pololu 2136
Index: PLL-01256
- Reduced price
- Promotion
Arduino Shield - extension - Strona 6
Loading...
G2 Dual High-Power 24v18 - 2-channel motor driver 40V/18A - Shield for Arduino - Pololu 2518
Overlay with two-channel motor driver working with voltages from 6,5 V to 40 V and current up to 18 A per channel (max. 50 A). The chip can be connected directly to...
Index: PLL-10588
Index: PLL-10588
Motoron M3S256 - 3 channel motor controller - 48V/2A - shield for Arduino - assembled - Pololu 5030
Three -channel motor driver for Motoron M3S256 manufactured by Pololu. The input voltage of the controller is in the range from 4.5 V to 48 V , the continuous current...
Index: PLL-21356
Index: PLL-21356
The u-GSM shield module with the BG95M2 chip allows for communication in the GSM, LTE, NB IoT standard. With it, you can conduct voice chirps and send SMS text messages ....
Index: ITB-21602
Index: ITB-21602
xyz-mIoT BG95M2 GSM LTE NB IoT EGPRS GNSS module - for Arduino and Raspberry Pi
The xyz-mIoT board is equipped with the Quectel BG95M2 module, which enables LTE CATM1 + NB IoT (CAT NB2 + NB1) communication with GNSS positioning. The module is based on...
Index: ITB-21603
Index: ITB-21603
MKR2UNO connector adapter toUno TSX00005 - shield for Arduino MKR
Shield for Arduino MKR, allowing the use of MKR boards in projects designed for Arduino Uno. It allows to use the shields . It works with a voltage of 3.3 V.
Index: ARD-12447
Index: ARD-12447
Three -channel motor driver for Motoron M3S256 from Pololu. The input voltage ranges from 4.5 V to 48 V with a continuous current consumption of up to 2 A , momentary (for...
Index: PLL-21358
Index: PLL-21358
The Motoron M2S18v18 DC motor driver created by Pololu allows you to control two motors. The driver input voltage is between 6.5V and 30V and the maximum continuous output...
Index: PLL-21985
Index: PLL-21985
Arduino Edge Control - outdoor environments Bluetooth controller - Arduino AKX00034
Controller equipped with Bluetooth chip for remote monitoring and control, optimized for outdoor environments . The board is equipped with a socket for plugging in any...
Index: ARD-19762
Index: ARD-19762
The Motoron M2S24v16 from Pololu allows you to control two high-power DC motors powered by a voltage ranging from 6.5 V to 40 V , and the maximum continuous output current...
Index: PLL-21983
Index: PLL-21983
Two-channel driver for Motoron M2S18v20 DC motors created by the Pololu company. The driver input voltage is between 6.5V and 30V and the maximum continuous output current...
Index: PLL-21984
Index: PLL-21984
The Motoron M2S24v14 motor controller created by Pololu allows you to control two high-power DC motors. The driver input voltage is between 6.5V and 40V and the maximum...
Index: PLL-21986
Index: PLL-21986
Prototype Shield V3.0 + Breadboard for Arduino Mega
Shield for Arduino Mega, allowing you to create your own systems (shields). The model is suitable for the latest versions of the family Arduino Mega Rev3. It has led out all...
Index: MOD-08226
Index: MOD-08226
DFRobot Shield NB-IoT/LTE/GPRS/GPS SIM7000E v2.0 - Shield for Arduino
Shield for Arduino, which allows you to send text messages and create connections in the GSM network. It also has GPS and LTE. It communicates via serial interface UART (RX,...
Index: DFR-12362
Index: DFR-12362
Screw Shield v3 - screw connectors for Arduino - Iduino EX027
Overlay consisting of two boards bringing out all Arduino pins on screw connectors, to which you can connect a wire with a screwdriver. Additionally there are analog and...
Index: OST-14327
Index: OST-14327
SX1509 - GPIO expander 16 I/O for Arduino - SparkFun BOB-13601
Expansion board with 16 GPIO pins together with I2C interface what means that to fully use all pins you only need to connect two wires to the microcontroller. SX1509 has also...
Index: SPF-11147
Index: SPF-11147
Solar Charger Shield v2.2 - shield for Arduino
Module for connecting a mobile power source for Arduino. It allows you to power the microcontroller from any battery voltage from 3 V to 4.2 V or solar panel voltage from 4.8 V...
Index: SEE-04429
Index: SEE-04429
![NFC Shield v2.0 pad on Arduino [OK]](https://cdn1.botland.store/59128-home_default/nfc-shield-v20-shield-for-arduino.jpg)
NFC Shield v2.0 - Shield for Arduino
Shield for Arduino, enabling the reading of data from the NFC and RFID devices at 13.56 MHz. The module has a built-in antenna, is powered from Arduino pins, it communicates...
Index: SEE-04420
Index: SEE-04420
DFRobot - SIM7600CE-T 4G (LTE) - shield do Arduino
Shield for Arduino module which allows you to send text messages and create calls in the GSM network. It is also equipped with GPS and LTE module. It communicates via UART...
Index: DFR-14047
Index: DFR-14047
EasyVR 3 Plus Shield - voice reconfition - shield for Arduino - SparkFun COM-15453
A set for Arduino for voice recognition. The set includes EasyVR 3 Plus module, adapter for Arduino, microphone and connectors for soldering. The module communicates through...
Index: SPF-15890
Index: SPF-15890