Actuators are devices that convert one type of measurement to another, for example, through the inclusion in the motion of the object caused by the supply signal (most often in the form of electric current or voltage corresponding to the threshold value, causing the actuation of an actuator), operating the object sensor. The result is change in the object in the form of, for example, create heat, the translational motion of mechanical parts, commissioning of the lighting, or audible warning signal. We offer modules series actuators Grove, will help You in creating an interesting and practical devices, for example, the building automation.
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Grove - accelerometers and gyroscopes
Products: 13
Loading...
A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with modules of Arduino and Raspberry.
Index: SEE-11358
Index: SEE-11358
Grove - MMA7660FC 3-axis digital accelerometer I2C
Module with 3-axis accelerometer based on MMA7660FC chip with digital I2C output and Grove connector. The MEMS sensor has a low power consumption and low profile. The module...
Index: SEE-15444
Index: SEE-15444
- Reduced price
- Promotion
Grove - 6-axis accelerometer and gyroscope LSM6DS3 - Seeedstudio 105020012
The module is equipped with a 6-axis accelerometer and a gyroscope based on the LSM6DS3 system with a built-in power regulator. It allows to measure 6 sizes: acceleration X,...
Index: SEE-15559
Index: SEE-15559
Grove - 3 Axis Analog Accelerometer ADXL335
The Grove series module equipped with the ADXL335 is a small, thin 3-axis accelerometer with signal voltage outputs. It measures acceleration with a minimum full scale range of...
Index: SEE-14738
Index: SEE-14738
Grove - 3-axis accelerometer, gyroscope and magnetometer - ICM20600 + AK09918 - I2C
The module from Grove series, designed for 9-deegre inertial navigation (IMU). It acts as a gyroscope, accelerometer and electronic compass. It allows you to measure angular...
Index: SEE-12916
Index: SEE-12916
Grove - 3 Axis Digital Compass V2
Grove Series 3-axis digital compass based on the Bosch BMM150. It allows to measure magnetic field in three perpendicular axes. The data can be read out using the I2C and SPI...
Index: SEE-14742
Index: SEE-14742
Grove - BMI088 - 6-Axis Accelerometer and Gyroscope I2C
The high-performance 6-axis sensor combines a 16-bit triaxial accelerometer and a 16-bit triaxial gyroscope from Grove. It can be used, among others, in drone applications and...
Index: SEE-14981
Index: SEE-14981
Grove - Collision Sensor - collision and vibration sensor
Collision sensor from Grove. It detect collision and vibration. It has an additional external circuit, to reduce the effect of ambient noise. The module is supplied with the...
Index: SEE-11300
Index: SEE-11300
Grove - 3 Axis Digital Accelerometer 16g Ultra - Low Power (BMA400)
Grove module 3-axis ±16 g low power digital accelerometer. It is a 12-bit digital three-axis sensor that detects acceleration and movement. Based on a BMA400 chip. Powered by...
Index: SEE-14739
Index: SEE-14739
A module based on the Bosch BMA456 sensor, which can act as a pedometer. The BMA456 is a small 3-axis acceleration sensor. The board is equipped with a Grove connector and a...
Index: SEE-15328
Index: SEE-15328
- Reduced price
- Promotion
Grove - SW-420 vibration sensor
Module with high sensitivity vibration sensor from Grove series. When the sensor is at rest, the output of the output transmitted is at a constant high signal (high) and the...
Index: SEE-12917
Index: SEE-12917
Grove - vibration sensor with piezoelectric membrane
Vibration sensor with flexible plastic piezoelectric sensor LDT0-028. It is supplied with 5V, works with modules from Arduino, Raspberry Pi and other...
Index: SEE-11342
Index: SEE-11342
Grove - 3-axis ADXL345 digital accelerator - I2C
3-axis digital compass from the Grove series. It is designed for measuring the acceleration along three axes in the range +/- 16 gr. The module is supplied with the voltage...
Index: SEE-11290
Index: SEE-11290
See also
- Grove - starter kits
- Grove - base hats
- Grove - actuators
- Grove - gas & dust sensors
- Grove - medical sensors
- Grove - distance sensors
- Grove - current sensors
- Grove - weather sensors
- Grove - force sensors and limit switchers
- Grove - light and colour sensors
- Grove - LED
- Grove - sensors and potentiometers
- Grove - converters
- Grove - communication modules
- Grove - sound modules
- Grove - relays
- Grove - cables
- Grove - buttons, keys and joysticks
- Grove - motor drivers
- Grove - displays
- Grove - covers and accessories
The main differences between sensors and aktuatorami
The sensor device work on the principle of conversion from the original physical quantity (e.g. temperature), the measured signal voltages and the actuators convert the signal voltage corresponding to a physical process, depending on the design and purpose on the actuator. For the measuring system, the output signal from the sensor is the source of the input information, while aktuator is triggered by the output signal from the measuring system. Magnetometers, microphones, cameras, buttons, and potentiometers is an example of a device sensor, which provides information on the entrance. In turn, LEDs, motor drivers, speakers, or lasers belong to the group of actuators.
Drives Grove is a small and practical
One of the most popular examples of Executive bodies in practice, is a stepper motor, which controls the speed of rotation and direction of rotation is to be made by feeding pulses and the bridge of the “H”. A stepper motor can be used in devices in which exactly defines the position of the object, for example, a robot arm. With the help of the Executive bodies of the Grove, you can also build a game console, equipped with a vibrating alarm as well as a training platform that will help to physically describe the exposure to electromagnetic fields and the principle of operation of machines and devices operating on the basis of the phenomenon of electromagnetic induction. And the motor module DC wiatraczkiem together with the control unit, based on the Atmega168, in addition, will allow you to start the game with the management of the Grove and not only.