Product description: Fiberlogy Easy PETG filament 1.75 mm 1 kg - Red
Fiberlogy's PETG filament requires a heated bed. The manufacturer also recommends cooling the print. The filament diameter is 1.75 mm , net weight 1 kg , and the cartridge color is red . This product is compatible with printers that do not have built-in security measures that prevent the use of cartridges from third-party suppliers. Furthermore, it is also suitable for use with open-source devices.
Fiberlogy Easy PETG filament 1.75 mm 1 kg - Red.
Our range of filaments also includes other materials and colors.
Advantages of PETG filament
- Highly resistant to abrasion and mechanical damage
- Odorless
- Flexible
- Waterproof
- It is characterized by very low material shrinkage
- Resistant to various acids, salts, and alkaline substances
- The surface of the material is characterized by high gloss
- Designed for professionals and beginners in 3D printing
Suggested filament printing parameters
| Printing temperature | From 255°C to 270°C |
| Table temperature | 90°C |
| Print cooling | Recommended |
| Due to differences in printer design, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
One spool contains 1 kg of filament with a diameter of 1.75 mm.
Technical specifications and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.02 mm |
| Color | Red |
| Printing temperature | From 255°C to 270°C |
| Table temperature | 90°C |
| Material | Easy PETG |
| Spool diameter | 200 mm |
| Spool width | 58 mm |
| Mounting hole diameter | 54 mm |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Roundness | +/- 0.01 mm |
| Package dimensions | 205 x 205 x 90 mm |
| Net weight | 1 kg |
Fiberlogy Easy PETG filament 1.75 mm 1 kg - Red
Fiberlogy Easy PETG filament, with a diameter of 1.75 mm and a weight of 1 kg, is a good choice for both beginners and experienced 3D printer users, thanks to its relative ease of use. A characteristic feature of this heat-shrinkable material is its high adhesion. Therefore, the manufacturer suggests additionally protecting the print bed surface with masking tape.
Print speeds reach <100 mm/s. Therefore, you can count on fast printing, even with relatively complex components. The manufacturer suggests drying the material for 4 hours at 60℃. Another characteristic of the filament is its low susceptibility to stringing.
Fiberlogy Easy PETG 1.75 mm filament – what else is worth knowing about it?
This heat shrink material is highly transparent and highly resistant to high temperatures. It can be successfully used in 3D printers using FFF/FDM technology that lack protection against universal filaments.
The specific density of the material reaches a value of <1.27 g/cm³. The filament moisture content is ≥ 0.3%, and the glass transition temperature is 85℃ (measured using the ASTM D3418 method),
Filaments are hygroscopic (they absorb moisture), so breaching the airtight vacuum packaging permanently reduces the quality and value of the product. Therefore, if you return an unpacked item, your refund amount will be reduced proportionally. Returns resulting from manufacturing defects (e.g., damaged or cut filament) are an exception. Please carefully verify the color and material type on the label before opening the packaging.
Useful links |
