Description: Filament Fiberlogy Easy PETG 1,75 mm 0,85 kg - Onyx
Fiberlogy's EasyPET-Gseries of filters with a glycol-enriched formula. It has a uniqueonyx colour. It is characterized by increased chemical and mechanical resistance. The diameter ofthe filteris1.75 mm. The weight of the printing material rolled up on a spool is850g. In order to ensure the highest quality of the product, each spool is vacuum packed.
In our offer of filaments you will also find other materials and colors.
Filament Fiberlogy Easy PETG 1.75 mm - Onyx.
Easy PET-G filters have alow shrinkage rate. They are odorless.This material reduces the phenomenon of uncontrolled delamination of the print, so called threading. It is often used to createhousings and containers.
Suggested print parameters of the filament
Print temperature: | from 220°C to 250°C |
Table temperature: | 90°C |
Cooling the printout: | recommended |
Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the Easy PETG pillar
Parameter | Scope |
---|---|
Diameter of pillar | 1.75 mm |
Dimensional tolerances of the philanthropy | +/- 0,02 mm |
Colour | onyx |
Printing temperature | from 230°C to 250°C |
Table temperature | 90°C |
Material | Easy PET-G |
Reel diameter | 200 mm |
Reel width | 80 mm |
Mounting hole diameter | 52 mm |
Moisture absorber | Yes |
Vacuum packing | Yes |
Roundness | +/- 0.01 mm |
Packaging dimensions | 205 x 205 x 90 mm |
Net weight | 0.85 kg |
Easy PET-G properties graph.
Useful links |