Filament Fiberlogy Easy PETG 1,75mm 0,85kg - White

Index: FLA-16086 EAN: 5902560995534

Filament Fiberlogy is white, PETG, the diameter of the material is 1.75 mm and the net weight is 0.85 kg. It requires the use of a heated table. PET-G filters are characterized by high strength, low shrinkage, resistance to acids, alkalis and salts. The spool on which the filament is wound is in two different versions sent randomly.

Filament Fiberlogy Easy PETG 1,75mm 0,85kg - White
€21.90
€17.80 tax excl.
Available
Shipping in 24 hours
PayPal payment
Fiberlogy Easy PETG 1,75mm 0,85kg - colors:
Manufacturer: Fiberlogy

Description: Filament Fiberlogy Easy PETG 1.75 mm 0.85 kg - White

Fiberlogy'swhite, PETG, the material has a diameter of1.75 mmand a net weight of0.85 kg. The product is compatible with printers that do not have built-in protection to prevent the use of cartridges from external suppliers. It is also used with open source devices.The PET-G filterrequires the use of a heated table. The manufacturer also recommends optional print cooling. PET-G filters are characterized by high strength, low shrinkage, resistance to acids, alkalis and salts. The spool on which the filament is wound is in two different versions sent randomly.

Filaments

In our offer of filaments you will also find other materials and colors.

Filament Fiberlogy Easy PET-G 1,75mm 0,85kg - White

Filament Fiberlogy Easy PET-G 1.75 mm 0.85 kg - White.

Advantages of the PETG pillar

Thermoplastic PETG polymer is characterized by high resistance to abrasion and mechanical damage, so it is used for printing various types of handles. In addition, PET-G filament isodourless, flexible, waterproofand has a very lowmaterial shrinkage.The surface of the material is characterized by high gloss. The appropriate temperature of the3D printerheadandtable should be determined during printing.

Suggested print parameters for filament

Printing temperature From 230°C to 250°C
Table temperature 90°C
Cooling the printout Recommended

Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally.

Technical specifications and physical properties of the pillar

Parameter Scope
Diameter of pillar 1.75 mm
Dimensional tolerances of the philanthropy +/- 0,02 mm
Colour White
Printing temperature From 230°C to 250°C
Table temperature 90°C
Material Easy PET-G
Reel diameter 200 mm
Reel width 80 mm
Mounting hole diameter 52 mm
Moisture absorber Yes
Vacuum packing Yes
Roundness +/- 0.01 mm
Packaging dimensions 205 x 205 x 90 mm
Net weight 0.85 kg

Colour white
Mass 850 g
Filament - material PETG
Filament - diameter 1.75 mm
Filament - Szpula Wielorazowa
Package width 21 cm
Package height 21 cm
Package depth 9 cm
Package weight 1.309 kg

Be the first to ask a question about this product!

Product reviews

Filament Fiberlogy Easy PETG 1,75mm 0,85kg - White

4.5/5

Average grade

3

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Sławomir J. 28.03.2022 Confirmed purchase Translated review
Filament a bit more demanding than PLA, but manageable
Stanisław G. 09.06.2021 Confirmed purchase Translated review
The filament is easy to use and gives a good quality of products. It was vacuum-packed with a hygroscopic bag and a leaflet with easy-to-understand instructions for use.
Jakub 11.12.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: