- Sale
- Sale
- Sale
- Sale
Power supply microUSB Akyga AK-TB-06 5V/2,5A Raspberry Pi 3/2/B+
Index: ZAS-07689
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
ELECTRONICS - Strona 12
Loading...
Jack 3,5mm stereo female jack - JY039-5P
Jack female 3.5 mm stereo socket. It has pins for the through-hole soldering (THT) on the PCB.
Index: KAB-02734
Index: KAB-02734
Zener diode of 0,5 W and voltage of 3,3 V. Price for 10 pieces.
Index: PAS-04933
Index: PAS-04933
Plug DC 5,5/2,1mm with cable 1,5m - 24AWG
2-vein cable, 1 m long with straight plug DC 5,5 / 2,1 mm.
Index: DNG-13749
Index: DNG-13749
Set of THT electrolytic capacitor justPi - 107 pcs.
A set of 12 most popular values of justPi electrolytic capacitors, useful in every workshop. Contains 107 pieces of capacitors of different voltages and dimensions....
Index: JUS-21743
Index: JUS-21743
Gravity - I2C/UART connection cable set - PH2.0-male - 30cm - 5pcs - DFRobot FIT0916-M
The kit includes 5 pieces of 30 cm long connection cables from DFRobot. On one side they are terminated with a female PH2.0 connector compatible with the Gravity standard,...
Index: DFR-22466
Index: DFR-22466
Splitter Wire for Servos Y - 15 cm (JR)
Wire splitter for servos with length of 15 cm. The wire allows you to connect two servos to one input of the controller.
Index: KAB-01388
Index: KAB-01388
Slide switch SS22T25 2-position - 5pcs
Slide switch, straight, to print with the size of 9 x 3.5 x 3.5 mm. Pins pitch: 2.5 mm. Items are sold in sets of 5 pieces.
Index: UCC-05272
Index: UCC-05272
Module with microUSB socket - soldered connectors
The module with a socket enables connection of the plug microUSB to any arrangement. The exit raster 2,54 mm is compatible with standard contact plates and connection...
Index: ZES-16535
Index: ZES-16535
Temperature sensor TMP36GT9Z - analog THT
Analog thermometer, in which the output voltage is proportional to the measured temperature from the range: -40 °C to +120 °C. It is powered with the voltage from 2.7 to 5.5 V.
Index: SES-02558
Index: SES-02558
Goldpin 2x20 straight raster 2.54mm
Male goldpin strip with 2 x 20 pins. Raster is 2.54 mm in length and 2.54 mm in width - between the two strips. It works with Raspberry Pi Zero among others.
Index: DNG-12659
Index: DNG-12659
Green coloured mouse pad with a working surface of 246 x 190 mm . It has a white print with electronic elements on the whole surface. The material of the mouse pad is...
Index: GRG-20448
Index: GRG-20448
Mini Tamiya connector - set (plug socket)
Power connector, type mini Tamiya - kit includes slot and plug.
Index: KAB-01075
Index: KAB-01075
Phototransistor TEPT4400 3mm 570nm
Phototransistor in the case of 3 mm. Maximum sensitivity for the wave with the length of 570 nm. The reading angle is 60 °. T ransparent lens.
Index: UCC-03866
Index: UCC-03866
Waterproof probe with LM35DZ - 1m analog temperature sensor
Waterproof probe is equipped with an analog thermometer DS18B20 with a cable with the length of 1 meter.
Index: SES-04815
Index: SES-04815
Index: PAS-04963
Infrared receiver module 1838 - 38kHz - Iduino ST1089
Module with IR receiver, operating at a frequency of 38 kHz. The module is powered with the voltage from 2.7 V to 5.5 V. It detects an angle of up to 90 °. Maximum detection...
Index: GRL-12508
Index: GRL-12508
Set of 10 pieces of red LEDs. The diameter of the lens is 5 mm. The diodes emit radiation in the visible light range. The LEDs are designed for THT (through hole) mounting....
Index: JUS-19995
Index: JUS-19995
Ceramic condenser 1,5nF/50V THT - 10pcs
Through hole ceramic capacitor of 1,5 nF / 50 V. The price for 10 pieces.
Index: PAS-03594
Index: PAS-03594
Infrared receiver TSOP31236 - 36kHz
TSOP31236 infrared receiver, operating at 36 kHz with a voltage from 2.7 V to 5.5 V.
Index: SES-04931
Index: SES-04931
BNC plug with quick screw connection
BNC plug ended with the screw connector, to which you can quickly connect the wires.
Index: KAB-05542
Index: KAB-05542
Digital light sensor with regulation - photoresistor + potentiometer
Module with photoresistor for Arduino. It is controlled by a digital signal, it is powered with the voltage from 3.3 V to 5 V. On board placed was a potentiometer to adjust the...
Index: GRL-12503
Index: GRL-12503
BleBox Probe - waterproof temperature probe for BleBox sensors - 5m
A waterproof temperature probe manufactured in Poland by BleBox. Designed for BleBox thermoBox and saunaBox sensors. The BleBox Probe allows for temperature readings in...
Index: BOX-20185
Index: BOX-20185
FORBOT - soldering kit for learning how to solder THT components
A set of elements for learning soldering using THT technology. In addition to dedicated PCBs, the set also includes elements for soldering, including: capacitors, resistors,...
Index: FOR-24479
Index: FOR-24479
- Reduced price
- SPECIAL OFFERS
Power LED Star 1W - warm white with heat sink
Power LED warm white with power of 1 watt and with a heat sink.
Index: LED-02492
Index: LED-02492