- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Raspberry Pi 400 GPIO adapter - 2x 40-pin - Waveshare 20219
Index: WSR-20079
- Reduced price
- Promotion
ELECTRONICS - Strona 13
Loading...
Waterproof probe with temperature sensor DS18B20 - Okystar - 3m
Waterproof probe based on DS18B20 chip. Power supply voltage is 3 V to 5.5 V . The sensor allows to measure temperature of places distant, difficult to reach from the main...
Index: OKY-16555
Index: OKY-16555
Female socket 2x20 raster 2.54mm for Raspberry Pi 4B/3B+/3B/3 - long pins 10mm
40-pin female connector strip compatible with the GPIO connector of the Raspberry Pi model 4B/3B+/3B/2B/B+/A+ with elongated pins with a length of 10 mm. Raster of the outputs...
Index: UCC-06811
Index: UCC-06811
MicroSD - SD card adapter with Raspberry Pi logo
Adapter to connect the microSD card to the SD input. Allows you to connect, for example, card with the operating system for the Raspberry to a PC desktop using an appropriate...
Index: RPI-08768
Index: RPI-08768
Fan 5V 40x40x10mm 2 wires - JST 2pin 2,54mm connector
The brushless fan is powered by 5 volts and has been manufactured from plastic. It has two 28 cm long cables terminated with two-pin JST 2.54 mm connector . Fan rotation...
Index: DNG-18680
Index: DNG-18680
LED 3mm blue - 10pcs. - justPi
Set of 10 pieces of blue LEDs with a lens diameter of 3 mm. It emits radiation in the visible light range. It is designed for THT through-hole mounting. LEDs are produced in...
Index: JUS-19990
Index: JUS-19990
Photoresistor 5-10kΩ GL5616 - 10pcs
Photoresistor GL5616 with the resistance of 5 to 10 kΩ, 100 mW of power and a size of 5x2 mm.
Index: SES-01564
Index: SES-01564
Zener diode of 0,5 W and voltage of 12 V. Price for 10 pieces.
Index: PAS-04957
Index: PAS-04957
MicroSD memory card reader - Esperanza EA134K
Universal reader of the memory microSD card with the USB 2.0 interface. It allows for data transfer from the card to the PC and laptop. It s upports microSD / T-Flash and...
Index: ESP-12637
Index: ESP-12637
Splitter Wire for Servos Y - 15 cm (JR)
Wire splitter for servos with length of 15 cm. The wire allows you to connect two servos to one input of the controller.
Index: KAB-01388
Index: KAB-01388
Zener Diode 0.5W 6.8V - 10 pieces
Zener diode with power of 0,5 V and a voltage of 6,8 V. The set includes 10 pieces.
Index: PAS-06691
Index: PAS-06691
Photoresistor 20-30kΩ GL5537-1 - 10pcs
Photoresistor GL5537-1 with the resistance of 20 to 30 kΩ, 100 mW of power and a size of 5x2 mm.
Index: SES-01563
Index: SES-01563
Index: LED-04539
IDC 10pin 1,27mm - microUSB adapter for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on the microUSB connector that allows to connect the sensor directly to the computer. The module is...
Index: DNG-13445
Index: DNG-13445
Fan 5V 30x30x10mm 2 wires - 2pin 2,54mm female connector
Brushless fan with 0,85 W and 5 V voltage. It is made of plastic. It has two 27 cm long cables ended with 2.54 mm two-pin connector . Fan rotation speed is 9582 rpm. Service...
Index: DNG-18679
Index: DNG-18679
ESP8266 wifi module + NodeMcu v3
Wi-fi module, based on ESP8266 system. On Board 10 GPIO ports (each of which can handle PWM, I2C and 1-wire), built-in 10-bit ADC and a converter USB-UART. It has installed...
Index: MOD-08241
Index: MOD-08241
5V fan 30x30x7mm - for Raspberry Pi case
Small 5V fan with dimensions of 30 x 30 x 7 mm . Can be used as a cooling element in Raspberry Pi cases. Equipped with two-pin connector for connection with GPIO of...
Index: DNG-18675
Index: DNG-18675
LED 5mm flashing blue clear - 5pcs
LED diode 5 mm blue flashing. Transparent lens. Price for 5 pieces.
Index: LED-03632
Index: LED-03632
BLS connectors - 5x2 socket - 5pcs.
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 5x2.
Index: KAB-04258
Index: KAB-04258
Module with USB socket And soldered connectors
A module with a USB A socket for connecting a type A USB plug to any circuit. Standard 2.54 mm pin raster , allows direct connection of the module to the contact plate or...
Index: MOD-16154
Index: MOD-16154
Screen with IPS 10,1 " 1280 x 800 px from the Waveshare company. It has a capacitive touch panel. It works with Raspberry Pi version 4B, 3B+ 3B+ 2B, 1B+, 1B, 1A and Zero and...
Index: WSR-06803
Index: WSR-06803
Card reader AK242C microSD SDHC
Universal reader of memory microSD cards with USB 2.0 interface. It allows for the data transfer from cards to PC and laptop. It s upports microSD / T-Flash and microSDHC...
Index: APT-13640
Index: APT-13640
Female header 1x40 angular raster 2,54mm
Single-row, female, angular 1x40. Raster of leads: 2.54 mm.
Index: KAB-05869
Index: KAB-05869
LED 5mm 12V with resistor and wire - green - 5pcs
Led 5mm green with the included resistor and a wire length of 20 cm. It is supplied with the voltage of 12 V. Items are sold in sets of 5 pieces.
Index: LED-03159
Index: LED-03159
BLS connector - socket 8x1 - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 8x1 sockets.
Index: KAB-04179
Index: KAB-04179