- Reduced price
- Promotion
- Reduced price
- Promotion
ELECTRONICS - Strona 14
Loading...
BLS connector - socket 8x1 - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 8x1 sockets.
Index: KAB-04179
Index: KAB-04179
IR beam interruption sensor - LED 5mm - 0-50 cm
The sensor reacts to an interruption of the infrared light beam transmitted between the transmitter and receiver . The receiver indicates when the beam is interrupted by...
Index: DNG-18690
Index: DNG-18690
Tact Switch 12x12mm buttons set 50pcs - colored caps + organizer
Set of 50 colored monostable buttons with the THT 12x12 mm pins for through-hole installation. All is packed in an organizer with described dividers.
Index: PAS-11890
Index: PAS-11890
Seeed Xiao ESP32-S3 Sense - set with OV2640 camera - WiFi/Bluetooth - Seeedstudio 113991115
A set from Seeedstudio consisting of two modules - Seeed Xiao ESP32-S3 and the OV2640 camera. The Seeed Xiao module is equipped with the ESP32-S3 system with a dual-core Xtensa...
Index: SEE-22926
Index: SEE-22926
Liquid flow sensor YF-G1 100l/m - 1''thread
Sensor of liquid flow operating in the range from 2 to 100 liters per minute. Is supplied with the voltage from 3,5 V to 24 V, the output signal is a frequency proportional to...
Index: SES-08897
Index: SES-08897
LED holder 5mm - metal concave - 10pcs
A concave holder designed for 5 mm LEDs. It is made of metal, inside the holder there is an insulating plastic insert . The holders are designed to protect the diode...
Index: DNG-18764
Index: DNG-18764
JustPi THT CF carbon resistor 1/4W 2,2kΩ - 30pcs.
The set consists of 30 resistors. The electronic elements are designed for THT through-hole mounting. Resistance is 2.2 kΩ and tolerance is 5%.
Index: JUS-20015
Index: JUS-20015
Gravity - I2C/UART connection cable set - PH2.0-male - 30cm - 5pcs - DFRobot FIT0916-M
The kit includes 5 pieces of 30 cm long connection cables from DFRobot. On one side they are terminated with a female PH2.0 connector compatible with the Gravity standard,...
Index: DFR-22466
Index: DFR-22466
Grove - 10kΩ rotary potentiometer linear lower connector
Potentiometer 10 kOhm with linear rotary. It has a 300° range of rotation. It has a 4-pin Grove connector on the other side of the handle. The kit includes a cable adapted...
Index: SEE-04430
Index: SEE-04430
Connection cables Female-female without terminals 30cm - 40pcs
The set contains 40 pieces of 30 cm long, multi-coloured connection wires terminated on both sides with a female connector without a plastic cap. The wires can be combined in...
Index: KAB-06178
Index: KAB-06178
DFRobot Gravity - VEML7700 digital ambient light sensor - I2C
The module is compatible with Arduino, equipped with a digital light sensor with a resolution of 16-bit, it is powered with the voltage in the range from 3.3 V to 5.5 V. It...
Index: DFR-09528
Index: DFR-09528
Holding electromagnet 12V 60kgf
The holding electromagnet is powered with a voltage of 12 V. Keep the weight of 60 kg in standard earth acceleration 9.8 m/S2. The dimensions of the elctromagnet 38 x 80 x...
Index: MOD-09813
Index: MOD-09813
Index: LED-11519
MK621 On-Off Switch 250V/15A - Green
Switch, type on-off. The load capacity of the contacts is 250 V / 15 A.
Index: KAB-03710
Index: KAB-03710
Monolithic capacitor 10nF/50V - 10pcs
10 nF / 50 V monolithic capacitor. Leads pattern: 5 mm. Length with leads: 14 mm. Price for 10 pieces.
Index: PAS-04928
Index: PAS-04928
Index: PAS-04963
LED indicator 230V AC - 12mm - red
LED light, operating voltage 230 V AC. It has a diameter of 12 mm.
Index: LED-08999
Index: LED-08999
Big button with an outer diameter of 6 cm with the built-in LED illuminating the dome.
Index: DNG-10941
Index: DNG-10941
Limit switch with curved handle. Maximum operating parameters: voltage of 250V and current of 16 A.
Index: PAS-00926
Index: PAS-00926
D-SUB 9 female socket is used, for example, for the communication via the RS232 protocol.
Index: KAB-02453
Index: KAB-02453
Tact Switch 12x12, 7mm THT 6pin - orange backlight - 5pcs.
A small monostable button mounted in a through-hole way - THT with six pins with the size: 12x12 mm, height: 7 mm. The button is with the backlight in the orange color.
Index: SWT-04787
Index: SWT-04787
13,56MHz /125kHz RFID/NFC Keychain Fob - 10pcs
The RFID identifier in the form of a keychain. Each chip has a unique 32-bit code. The device works at a small distance from the reader, the carrier frequency is 13,56 MHz...
Index: MOD-07051
Index: MOD-07051
Module with DC 5,5x2,1mm socket + LED
The module allows the connection of a power supply unit with a 5.5 x 2.1 mm plug to the prototype PCB using connection wires.
Index: MOD-09419
Index: MOD-09419
Magnetic sensor door/window - reed switch
Wireless proximity sensor activated magnetically. The device is used mainly to determine the position of doors and windows. Case dimensions - 11 x 16 mm.
Index: DNG-10159
Index: DNG-10159