- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 124
Loading...
Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions...
Index: MOD-02901
Index: MOD-02901
XBee Adapter USB v2.2 - DFRobot DFR0174
USB converter for XBee module. It works with all XBee systems from 1, 2.5 & 3, standard and pro series. Version of the DFRobot company has derived connectors of the UART - RX,...
Index: DFR-03037
Index: DFR-03037
- Reduced price
- SPECIAL OFFERS
APDS-9960 RGB sensor and 3,3V I2C gesture detector - SparkFun SEN-12787
Module with sensor that measures the light intensity of the environment, enables the detection of proximity of an object and recognize hand gestures. With this sensor, you can...
Index: SPF-03065
Index: SPF-03065
Thermometer with external probe and LCD display from -50°C to 80°C - white
Digital sensor with the probe for measuring the outdoor temperature and with the LCD display. It works in the range from - 50 °C to 80 °C. The probe is on a wire with a length...
Index: SES-03160
Index: SES-03160
Ultrasonic distance sensor URM37 v5 2-800cm with temperature correction
Ultrasonic sensor from DFRobot operating in the range from 2 cm to 800 cm. It is powered with the voltage from 3.3 V to 5,5 V. Communication is via serial interface UART (RX,...
Index: DFR-03413
Index: DFR-03413
Speaker YD40 0.25W 50Ohm - 40x16mm
Speaker power 0.25 W, impedance of 50 Ohms, and dimensions of 40 x 16 mm.
Index: EAK-03470
Index: EAK-03470
Simple Servo Trigger Servo Controller - SparkFun WIG-13118
A simple controller allowing the servo to move from position A to B after changing the state on the IN input pin. The position can be adjusted with potentiometers. The system...
Index: SPF-03550
Index: SPF-03550
RC Switch with digital output - Pololu 2801
The module processes the RC signals to a digital on/off status. The board is working with a supply voltage of 2.5 V-5.5 V, maximum output current is 25 mA.
Index: PLL-03733
Index: PLL-03733
RJ45 (6P4C) plug to the phone cable. Price is for 5 pieces.
Index: UCC-03920
Index: UCC-03920
DFRobot Gravity DFR0018 - set of 9 modules with cables for Arduino
A set of 9 popular modules compatible with Arduino boards. It has 7 sensors, including: light, temperature, touch, rotation, vibration sensors, and the button and the module...
Index: DFR-03933
Index: DFR-03933
Si5351A - 160MHz I2C signal generator - Adafruit 2045
The chip features a 25 MHz precision oscillator and PLL loops, which can generate signals from 8 kHz to 160 MHz. The chip works with voltages up to 3 V to 5.0 V, the Vpp value...
Index: ADA-04174
Index: ADA-04174
Logic level transmitter TXB0104 bi-directional, 4-channel - SparkFun BOB-11771
The module allows to exchange the data between systems that use the most popular voltage levels: from 1.2 V to 3.6 V for VCCA inputs, and from 1.65 V to 5.5 V for VCCB inputs....
Index: SPF-04290
Index: SPF-04290
Grove - IR receiver 38kHz 940nm
IR receiver from Grove , operating at a frequency of 38 kHz with a supply voltage from 3.3 V to 5.0 V. Maximum sensitivity is observed for the wave length of 940 nm.
Index: SEE-04419
Index: SEE-04419
Huzzah ESP8266 - WiFi module GPIO, ADC, PCB antena - Adafruit 2471
Wi-fi module, based on ESP8266 system. On board are 9 GPIO ports with the support for iSPI I2C, analog input and UART interface. It has NodeMCU software installed which enables...
Index: ADA-04601
Index: ADA-04601
- Sale
- SPECIAL OFFERS
Humidity, temperature and pressure sensor powered with a voltage of 3 to 5 V with I2C and SPI interface. Measuring range: temperature: -40 °C to 85 °C, humidity: 10% RH to 100%...
Index: ADA-04633
Index: ADA-04633
MinIMU-9 v5 9DOF - accelerometer, gyroscope and magnetometer I2C - Pololu 2738
The sensor allows to measure 9 sizes: acceleration X, Y, Z magnetic field X, Y, Z and angular velocity X, Y, Z. It is a combination of 3-axis accelerometer and gyroscope...
Index: PLL-05528
Index: PLL-05528
Proto Board for Raspberry Pi Zero
Board allows independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer in a version Zero.
Index: MSX-05794
Index: MSX-05794
RCA socket with quick screw connection - 5pcs
RCA slot ended with the screw connector, to which you can quickly connect the wires. Items are sold in sets of 5 pieces.
Index: KAB-05820
Index: KAB-05820
Plastic case Kradex Z32B - 188x60x38mm black
A two-piece, universal enclosure for an electronic circuit made of polystyrene in black. The enclosure is assembled using the mounting screws included with the enclosure...
Index: KDX-05884
Index: KDX-05884
- Sale
Universal board large 840 holes - MSX
A universal board with a connection layout in line with the popular 830 field contact board. The module allows the transfer and soldering of the prototype system from the...
Index: MSX-06118
Index: MSX-06118
Rotary switch 12-position 1 circuits - 60mm
Rotary switch, 12-state for the case, equipped with 13 contacts. The total height is 60 mm.
Index: UCC-06154
Index: UCC-06154
Rotary switch 8-position 1 circuit - 30mm
Rotary switch, 8-state for the case, equipped with 9 contacts. The total height is 29.5 mm.
Index: UCC-06162
Index: UCC-06162
Low-Power LM393P dual-channel comparator - THT DIP8 - 5pcs
Comparator LM393 with supply voltage from 2 V to 36 V. The response time is 300 ns. 5 units are included.
Index: UCC-06265
Index: UCC-06265
Humidity and Temperature Sensor Breakout - Si7021 - SparkFun SEN-13763
Humidity and temperature sensor powered by the voltage from 1.9 V to 3.6 V with I2C interface. The measurement of temperature is from -10°C to 85°C, humidity from 0 to 80% RH.
Index: SPF-06554
Index: SPF-06554
- Sale
- SPECIAL OFFERS