- New
- New
- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 123
Loading...
Step-Down Voltage Regulator D24V5F6 - 6V 0,5A - Pololu 2844
A step-down pulse inverter module with an efficiency of 80 % - 93 %. Converts the input voltage from 6.1 V to 36 V to an output value of 6.0 V. The maximum continuous current...
Index: PLL-03111
Index: PLL-03111
Magnetic sensor to open door/window - reed contact CMD19
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 19 x 23 mm.
Index: SES-03130
Index: SES-03130
Step-Down Voltage Regulator D24V25F3 - 3,3V 2,5A - Pololu 2849
Step-down converter with 3.3 V output voltage. The maximum current is 2.5 A. The supply voltage is in the wide range from 4.5 V to 38 V. The module dimensions are 18 x 18 mm.
Index: PLL-03155
Index: PLL-03155
Step-Down Voltage Regulator D24V25F9 - 9V 2,5A - Pololu 2854
Step-down converter with an output voltage of 9 V. The maximum input current depends on the input voltage and load. The supply voltage is in a wide range from 10.5 V to 38 V....
Index: PLL-03158
Index: PLL-03158
MB85RS64V - 64Kb / 8KB FRAM non-volatile SPI memory - Adafruit 1897
Module with non-volatile FRAM memory for data storage which is characterized by low power consumption and very high durability. The system capacity is 64 KB (8 KB), it...
Index: ADA-03197
Index: ADA-03197
Microphone 36-38dB 6/2,7mm - THT - 10pcs.
Height h: 2,7 mm. Diameter Ø: 6 mm Sensitivity: 36 - 38 dB. Pins - pitch: 1.8 mm.
Index: EAK-03252
Index: EAK-03252
Touch button AT42QT1010 - SparkFun module SEN-12041
A module made by SparkFun with a capacitive touch button based on AT42QT1010 system. It is powered with the voltage in the range from 1.8 V to 5 V. It has a digital output...
Index: SPF-03291
Index: SPF-03291
Infrared receiver TSOP4836 - 36kHz - 5 pcs.
IR receiver TSOP4836, it is operating at a frequency of 36 kHz with a voltage from 4.5 V to 5.5 V.
Index: SES-03430
Index: SES-03430
Speaker YD36 0.5W 8 Ohms - 40x5mm
Speaker power 0.5 W, resistance 8 Ohm, size 40 x 5 mm.
Index: EAK-03466
Index: EAK-03466
Speaker YD30 0.5W 8Ohm - 28x12mm
Speaker power 0.5 W, resistance 8 Ohm and dimensions of 15 x 12 mm.
Index: EAK-03469
Index: EAK-03469
Speaker YD50-P 0.5W 8Ohm - 50x17mm
Speaker power 0.5 W, resistance 8 Ohm, dimensions 50 x 17 mm.
Index: EAK-03477
Index: EAK-03477
DC 5,5/2,1mm socket with quick connection and buttons v2
DC φ5.5 x 2.1 mm socket (for AC adapter) with connector allowing you to mount the cable using the buttons.
Index: KAB-03506
Index: KAB-03506
3,5mm 4-field Jack - 3x RCA - 1,5m
Cable is used to transmit stereo sound and image from the computer, including Raspberry Pi 2 and B+. It has 4-field Jack 3.5 mm connector and three RCA plugs. Cable length is...
Index: KAB-03527
Index: KAB-03527
Goldpin distancing plug 1x40 2,54mm raster
Male goldpin, double, extended 1x40 strap, pitch of 2.54 mm.
Index: KAB-03573
Index: KAB-03573
Big Push Button 10cm - green (eko2 version)
Big button with an outer diameter equal to 10 cm. Eko2 buttons can rattle when shaking but they perfectly perform their function.
Index: SWT-03653
Index: SWT-03653
Step-Up Voltage Regulator with USB socket 5V 1,2A
A step-up converter with 5 V output voltage and a maximum current of 1200 mA. It is powered from 2 V to 5 V. The output is a USB socket, so the chip can be used as a mobile...
Index: MOD-03686
Index: MOD-03686
LED 5mm white cool clear - 5pcs
5mm cold white LED . Transparent lens. Price per 5 pieces .
Index: LED-03705
Index: LED-03705
5mm 12V LED with resistor and wire - yellow
5mm yellow LED with attached resistor and 20cm long wire. Powered by 12 V DC. Price for 5 pcs .
Index: LED-03721
Index: LED-03721
USB adapter for female cables with USB-UART PL2303 converter
The adapter allows you to connect the USB connector to many different modules using the built-in USB - UART PL2303 converter. The wires are terminated with female connectors....
Index: MOD-03727
Index: MOD-03727
The fan with the input voltage of 12 V and a size of 80 x 80 x 25 mm.
Index: MOT-03876
Index: MOT-03876
NTC 110 10kΩ thermistor with M6 screw connection
Thermistor of NTC type with a resistance of 10 kΩ with connector for M6 screw. The connecting cable has a length of 160 mm.
Index: SES-03878
Index: SES-03878
Laser sensor of dust /particle concentration PM2.5 - PMS5003
The sensor measures the coefficient of PM2.5, that is, the number of so-called dust suspended in the air. They are contaminants which are harmful to the environment and human...
Index: DFR-03943
Index: DFR-03943
Thumb Joystick with v2 button - module with a plate - Iduino ST1079
The module is equipped with a joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions...
Index: MOD-04093
Index: MOD-04093
HDMI-M/DisplayPort-M cable Akyga 1.8m
Cable to connect the source device Display Port with the receiving device equipped with HDMI connector. The cable supports Full HD, it has gilded tips, and its length is 1.8...
Index: KAB-04125
Index: KAB-04125