- New
- New
- Reduced price
- Sale
ELECTRONICS - Strona 125
Loading...
2,54 mm - socket housing 4-pin - 5pcs.
4-pin socket housing for cable, 2.54 mm pitch. Set includes 5 4-pin housings.
Index: KAB-06782
Index: KAB-06782
Assembly bar male 16-pin, raster 5,08mm, angular closed
Seperable terminal block, male, angular, 16-pin. Pitch is 5.08 mm. Height is 12 mm.
Index: KAB-07134
Index: KAB-07134
- Sale
- SPECIAL OFFERS
OpenScale - strain-gauge bridge ATmega328P - SparkFun SEN-13261
Module for measuring the weight and temperature. It is used to read data from the strain-gauge sensors. It allows for calibration, setting the sampling frequency and accuracy....
Index: SPF-07276
Index: SPF-07276
- Sale
- SPECIAL OFFERS
QRE1113 - analog reflectance sensor - SparkFun ROB-09453
Analog sensor that has capability of detecting the line. Detects light reflected from the surface and on its basis determines the color of the surface. The module has an analog...
Index: SPF-07684
Index: SPF-07684
Inductance: 1 mH. Maximum current: 40 mA. Resistance: 33 Ω. Dimensions: 3 x 7 mm. Price for 10 pieces.
Index: PAS-07966
Index: PAS-07966
Triple Axis Accelerometer Breakout - LIS3DH - SparkFun SEN-13963
Sensor LIS3DH is a 3-axis digital accelerometer. It allows you to measure acceleration in the configurable ranges. It communicates via the I2C or SPI bus, it is powered from a...
Index: SPF-08064
Index: SPF-08064
- Sale
- SPECIAL OFFERS
Adapter DC 5,5/2,1mm with switch - 2 plugs
Branch joint with one female 5,5 / 2,1 mm slot and the two male 5.5 / 2.1 mm plugs. It has the switch mounted on the cable. It can be used, i.a. to supply many LED strips from...
Index: KAB-08135
Index: KAB-08135
Joystick Shield v1.A - Shield for Arduino
Module with a joystick and buttons connected directly to the ports on Arduino. It is supplied with2-axes lever and six buttons. It has built-in I2C connector, Bluetooth,...
Index: MOD-08234
Index: MOD-08234
PN532 NFC/RFID 13,56MHz I2C/SPI module + card and a keychain
Board allows you to read and save data from RFID devices at 13.56 MHz frequencies. It also works with the NFC protocol. The module is based on PN532 system, it is powered with...
Index: MOD-08240
Index: MOD-08240
Antenna WiFi 6dBi U.FL for LattePanda
WiFi antenna 6 dBi with a U. FL connector allowing to connect it to the minicomputer LattePanda.
Index: DFR-08364
Index: DFR-08364
9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS1 - Adafruit 3387
The sensor is a combination of 3-axis digital gyroscope, accelerometer and compass. It allows you to measure acceleration, magnetic field and angular velocity in the...
Index: ADA-08441
Index: ADA-08441
Literal markers for cable 5mm - 1300pcs
Set for marking wires with a diameter of 5 mm. Contains 50 pieces of markers with letters from A to Z in orange.
Index: KAB-08522
Index: KAB-08522
LED indicator 12V DC - 8mm - yellow
LED light, working voltage 12 V DC. It has a diameter of 8 mm.
Index: LED-08987
Index: LED-08987
LED indicator 230V AC - 28mm - blue
LED light, operating voltage 230 V AC. It has a diameter of 28 mm.
Index: LED-09016
Index: LED-09016
LED indicator 24V DC - 28mm - red with a buzzer
Indicator light operating at 24 V DC. It has a diameter of 28 mm.
Index: LED-09020
Index: LED-09020
E-paper E-Ink 2.9'' 296x128px - SPI display module - Waveshare 12956
Module with 2.9" e-paper display with a resolution of 296 x 128 px. Communicates via the SPI interface, e.g. with Arduino or Raspberry Pi.
Index: WSR-09099
Index: WSR-09099
iNode Control Point USB - programmable USB module - RFID system
iNode Control ID works the same as iNode Control Point. All information on the verification of the remote devices is transmitted via USB to the computer. It communicates via...
Index: INO-09947
Index: INO-09947
- Sale
3pin 250V electric cube - orange
The electric 3-pin cube that allows to connect the wires with a voltage of 250 V in a simple way, without the need of using the tools.
Index: LEC-09990
Index: LEC-09990
Thread Bobbin - 12m - SparkFun DEV-13814
Spool with the smooth conductive thread. The thread is made of stainless steel fiber and wound on a plastic reel. The thread has a resistance of 27 Ω per meter. Price...
Index: SPF-10102
Index: SPF-10102
Piezoelectric sensor of vibration with mass - SparkFun SEN-09197
Piezoelectric vibration sensor, used for measurements of touch, vibrations, hits and flexibility. A small AC voltage and high voltage of up to 90 V, it occurs when the foil...
Index: SPF-10116
Index: SPF-10116
Magnetic sensor - reed contact CMD615
Wireless proximity sensor activated magnetically. Case dimensions 15 x 6.5 mm.
Index: AKS-10154
Index: AKS-10154
Feather Huzzah ESP32 - WiFi module, Bluetooth GPIO - Adafruit 3405
The wi-fi module and Bluetooth, based on the system ESP32. On board is 8 GPIO ports with support for I2C and SPI, analog input and a connector with a 3.7 V lipol battery. It...
Index: ADA-10313
Index: ADA-10313
Step-Up/Step-Down Voltage Regulator S9V11MA - 2,5-9V 1,5A - Pololu 2869
Miniature boost converter module supplied with voltage from 3 V to 16 V . Output voltage adjustable from 2,5 V to 9 V. Maximum current 1,5 A. Dimensions: 15 x 13 x 6 mm....
Index: PLL-10672
Index: PLL-10672
ON-OFF switch monostable - PBW-12BPW - 2A / 250V - flat red / green
A flat monostable switch with green/red backlight. Contact load is 2 A for 250 V.
Index: AKS-10803
Index: AKS-10803