- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 126
Loading...
ADT7410 - High Accuracy I2C Temperature Sensor Breakout Board - Adafruit 4089
Adafruit temperature sensor with high accuracy with digital thermometer ADT7410 in the range of -40°C to +105°C equipped with interface I 2 C (TWI). The supply voltage ranges...
Index: ADA-13951
Index: ADA-13951
Tic T249 - USB stepper motor driver 47V/4,5A - assembled - Pololu 3138
Stepper motor driver based on TB67S249FTG chip. Powered by a voltage range of 10 - 47 V, with a maximum current consumption of 4,5 A per coil. Maximum resolution: 1/32 of a...
Index: PLL-13959
Index: PLL-13959
Index: KAB-14017
RFID Qwiic Reader - SparkFun SEN-15191
Easy to use RFID reader module is equipped with Qwiic connectors based on the I2C interface. It works with systems series ID-3LA, ID-12LA and ID-20LA. The board allows you to...
Index: SPF-14072
Index: SPF-14072
- Sale
Distance sensor, reflective 3,3V/5V - Iduino ST1140
The module is equipped with IR reflective sensor equipped with digital output. It works with a supply voltage from 3.3 V to 5 V. It is applied in the robots tracking the line.
Index: OST-14274
Index: OST-14274
IR receiver + wire - Iduino SE027
Simple Iduino module with IR receiver, operating at a frequency of 38 kHz. The module is powered with the voltage of 5 V. It detects a beam at an angle of 90°. Maximum...
Index: OST-14283
Index: OST-14283
Sound sensor - microphone - Iduino ST1146
The sound detector with a small microphone, a voltage supply range from 3.3 V to 5 V. T he module is easy to use, has two outputs: an analog - to measure the intensity of the...
Index: OST-14287
Index: OST-14287
Module with Hall sensor - Iduino SE014
The module with the Hall sensor, the detection range of the magnetic field is regulated with the potentiometer. It has a built-in digital and analog connector. Powered with the...
Index: OST-14293
Index: OST-14293
Relay module 1 channel - 3A/250VAC contacts - 5V coil
The module is equipped with HK4100F relay with the voltage of 5 V. T he system allows you to control the actuators with a voltage of 250 V AC / 30 V DC , using the ports...
Index: OST-14297
Index: OST-14297
Module with photoresistor + cable - analog - Iduino ST1107
Module with photoresistor for Arduino. It can be used to measure the intensity of light. It is controlled via an analog signal, is powered with the voltage of 5 V. The set...
Index: OST-14301
Index: OST-14301
Module with real time clock DS1302 RTC. It allows you to read the time in hours, minutes, and seconds, date: day, month, year. Communicates via I/O interface.
Index: OST-14303
Index: OST-14303
Slide linear potentiometer. Equipped with two 3-pin connectors. The supply voltage is 5 V.
Index: OST-14312
Index: OST-14312
Temperature sensor - thermistor NTC-MF52 - Iduino ST1147
Module with temperature sensor equipped with a thermistor NTC-MF52. In order to read values from the sensor, connect it to the analog signal of the microcontroller. It detects...
Index: OST-14322
Index: OST-14322
2mm slit sensor - Iduino SE056
Digital module with optical sensor with a slit of 2 mm. The output is a digital signal. The supply voltage is 5 V. With the encoder's shield, it can be used as a device...
Index: OST-14323
Index: OST-14323
Magnetic Field Hall sensor - Iduino SE054
Module with Hall sensor, digital magnetic switch. Enables detection of a magnetic field. Operates with a voltage of 5 V.
Index: OST-14326
Index: OST-14326
Ultrasonic distance sensor 2-400cm - HY-SRF05
Ultrasonic sensor operating in the range from 2 cm to 400 cm. It is powered with voltage of 5 V. The output is a signal, duration of which is proportional to the measured...
Index: OST-14329
Index: OST-14329
Lanberg Ethernet Patchcord UTP 5e 1,5m - red
Patchcord with a length of 1.5 m in red color. Cable - twisted pair in category 5e Ethernet with RJ45 connectors installed. It has a cover that protects it from breaking.
Index: IMP-14370
Index: IMP-14370
Dust / air quality sensor - PM2,5 PMS1003 - 5V UART
Laser dust sensor that allows you to monitor air purity in real time. It measures PM2.5. The system is powered by 5 V, while the interface works with 3.3 V and communicates...
Index: PLA-14485
Index: PLA-14485
- Reduced price
- SPECIAL OFFERS
Spy Camera OV5647 5MPx Flex - spy camera with a flexible cable for Raspberry Pi Zero - 15cm
Spy camera for Raspberry Pi Zero and Zero W minicomputer. It is characterized by small dimensions, so it can be mounted in places that are difficult to access in order to...
Index: ODS-14565
Index: ODS-14565
Diode Schottky BAT48 SMD 1A / 40V - 10pcs
Schottky diodes with a maximum current of 1 A, reverse 40 V.
Index: AKS-14581
Index: AKS-14581
Diode Schottky SB560 5A / 60V - 10pcs
Schottky diodes with a maximum current of 5 A, 60 V back voltage.
Index: AKS-14591
Index: AKS-14591
Grove - LCD display 2x16 characters with backlight (Black on Yellow)
Monochrome 2 x 16 character LCD display with high brightness backlight from Grove. The module communicates with the control board via the two-row I2C bus. The screen is powered...
Index: SEE-14735
Index: SEE-14735
Sony IMX219-120 8Mpx camera - compatible with Jetson Nano - Waveshare 16579
Sony IMX219-120 camera module equipped with IMX219 sensor compatible with Jetson Nano. The camera is equipped with 8 Mpx sensor. The maximum recording resolution is 3280 x 2464...
Index: WSR-14785
Index: WSR-14785
36v4 - High - Power Stepper Motor Driver 50V/6A - Pololu 3730
The DRV8711 stepper motor controller allows you to control one bipolar stepper motor. Powered from 8 V to 50 V, with a maximum current draw of 6 A per coil. Maximum...
Index: PLL-14787
Index: PLL-14787