- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 19
Loading...
LED RGB 5mm matte common cathode - 5 pcs
LED RGB 5 mm with common cathode. Lens is matte with better light scattering. 5 pcs.
Index: UCC-01667
Index: UCC-01667
Extender with DEAN connectors with a length of 13 cm. On the one side, ended with a slot, on the other, with a plug.
Index: KAB-01682
Index: KAB-01682
Grove - set of 5 female-female 4-pin - 2mm/50cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. The length of the cable is 50 cm. Version with a latch.
Index: SEE-04399
Index: SEE-04399
Thermistor type NTC 110 with a resistance of 5 kΩ and 5% tolerance.
Index: SES-04948
Index: SES-04948
Rotary potentiometer 2x 500kΩ linear 1/8W - 5pcs.
Rotary linear potentiometer of 2 x 500 kΩ with the 1/8 W power. Pins' pitch is 5 mm which allows you to attach the device to the breadboard.
Index: PAS-05287
Index: PAS-05287
Set of heat shrink tubes 100pcs - black
Set of black heat shrink tubes with length 100 mm and diameter from 1.5 mm to 13 mm. The whole set come in transparent packaging.
Index: NSZ-05374
Index: NSZ-05374
13,56MHz /125kHz RFID/NFC Keychain Fob - 10pcs
The RFID identifier in the form of a keychain. Each chip has a unique 32-bit code. The device works at a small distance from the reader, the carrier frequency is 13,56 MHz...
Index: MOD-07051
Index: MOD-07051
Optical sensor with LM393 comparator - 10mm
Digital module with optical sensor, with a slit of 10 mm. The module has a built-in LM393 comparator because the output is a digital signal. The supply voltage is 5 V. Along...
Index: MOD-07562
Index: MOD-07562
Electric cube 3pin 8A/450V in case
The 3-pin electric cube allows you to connect the wires with a voltage of 450 V with the flow of current up to 8 A. Connection pitch is 8 mm, the maximum diameter of the cable...
Index: KAB-08078
Index: KAB-08078
Wireless keyboard + touchpad Mini Touch - black - AAA batteries
Compact, wireless keyboard with touchpad for remote computer management. The device works with Raspberry Pi. The set also includes a USB adapter. Keyboard powered by 2x AAA...
Index: GRL-09971
Index: GRL-09971
Set of electronic components - E32 - 254 elements
A 254-piece prototyping kit for Arduino and Raspberry Pi. Includes: Tact Switch buttons, LEDs, resistors, potentiometers, and goldpin connectors .
Index: GRL-12110
Index: GRL-12110
LED holder 5mm - nylon long transparent - 10pcs.
The holder is designed for 5 mm LEDs. It is made of transparent nylon . The holders are designed to protect the diode from external factors and mechanical damage. The product...
Index: DNG-18765
Index: DNG-18765
Goldpin strip 1x40 female 2.54mm pitch - 10pcs. - justPi
A set consisting of 10 pieces of 1x40 female goldpin strips with a black housing. Pin pitch is 2.54 mm . The element works well in the implementation of projects that...
Index: JUS-20029
Index: JUS-20029
JustPi THT CF carbon resistor 1/4W 100Ω - 30pcs.
A set of 30 resistors. The electronic elements are designed for THT through-hole mounting. Resistance is 100 Ω and tolerance is 5%.
Index: JUS-20151
Index: JUS-20151
Dedicated All-in-One 3007 Cooling Fan for Raspberry Pi CM4 - Waveshare 22096
Waveshare's dedicated, quiet All-in-One cooling for Raspberry Pi Compute Module 4 (CM4) modules consists of a fan located on a large heat sink with a four-pin cable. The fan...
Index: WSR-21716
Index: WSR-21716
Linear voltage regulator 8V LM7808 - THT TO220
LM7808CV linear regulator. Output voltage: 8 V, maximum current: 1 A. Housing: TO-220 (THT).
Index: UCC-00299
Index: UCC-00299
Single Channel Optocoupler PC817 - THT - 10pcs
Optocoupler 1-CH. Transistor output. Case: DIP4. Items are sold in sets of 10 pieces.
Index: UCC-01951
Index: UCC-01951
USB-UART converter D-Sun PL2303
Converter which provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....
Index: MOD-04146
Index: MOD-04146
Strip LED SMD5050 IP65 14,4W, 60 LED/m, 10mm, warm white - 5m
RGB LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 14.4 W/m, density of 60 diodes per meter. The color of the light is warm white. Protection...
Index: LED-07081
Index: LED-07081
Strip LED SMD5050 IP20 14,4W, 60 LED/m, 10mm, warm white - 5m
LED strip powered by a voltage of 12 V with self-adhesive tape. Consumes power: 14.4 W/m, density of 60 diodes per meter. The color of the light is warm white. Protection...
Index: LED-07084
Index: LED-07084
THT CF carbon resistors 1/4W 220kΩ - 30pcs.
The set consists of 30 resistors. The electronic elements are designed for THT through-hole mounting. Resistance is 220 kΩ and tolerance is 5%.
Index: JUS-20019
Index: JUS-20019
IDC 10 pin female-male cable for printing - 30cm
Universal female cable with the length of 30 cm, ended with the 10-pin IDC female slot and male plug for printing, pitch of 2.54 mm. The cable can be used, for example, to...
Index: KAB-02568
Index: KAB-02568
Stepper motor driver A4988 RepRap - red
Stepper motor controller based on A4988. Powered from 8 - 35 V, with a maximum current consumption of 1 A per coil. Maximum resolution: 1/16 steps.
Index: MOD-02660
Index: MOD-02660
Big Push Button 10cm - yellow (eko2 version)
Big button with an outer diameter equal to 10 cm. Eko2 buttons can rattle when shaking but they perfectly perform their function.
Index: SWT-03654
Index: SWT-03654