Set - Creality Hi Combo 3D Printer + 4x Creality Hyper PLA Filament
Index: CRL-27622
- New
- Reduced price
- Pack
- Sale
Set - Creality Hi 3D Printer + 4x Creality Hyper PLA Filament
Index: CRL-27627
- New
- Reduced price
- Pack
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Sonoff M5-3C-80-FW - frame for wall switch M5-80 - triple - white
Index: INN-25520
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 18
Loading...
2,54 mm - socket housing 5-pin - 5pcs.
The 5-pin socket's case for the cable, the pitch is 2.54 mm. The kit includes 5 x 5-pin cases.
Index: KAB-06781
Index: KAB-06781
Four-channel opto-isolator A87 TLP281
4-channel opto-isolator designed to connect digital systems such as microcontrollers 5 V for high voltage systems. Maximum input voltage is 24 V.
Index: MOD-09909
Index: MOD-09909
HDMI cable - black braided - 0.3 m
HDMI allows you to connect audio and video devices in accordance with the standard. The cable supports Full HD mode. Cable is black and braided, its length is 0.3 m.
Index: DNG-10017
Index: DNG-10017
Aluminum Heat Sink for Raspberry Pi 3 - 15x15x15mm high
High aluminum heatsink for minicomputer Raspberry Pi 3 in silver, size 15 x 15 x 15 mm.
Index: ODS-13808
Index: ODS-13808
Membrane keypad - 2 coloured buttons with arrows - self-adhesive
Diaphragm keypad with two buttons in red and yellow, additionally there are arrows on the buttons up and down . Thanks to the navigation arrows, the keyboard is perfect as...
Index: DNG-16994
Index: DNG-16994
Grove - 10kΩ rotary potentiometer linear lower connector
Potentiometer 10 kOhm with linear rotary. It has a 300° range of rotation. It has a 4-pin Grove connector on the other side of the handle. The kit includes a cable adapted...
Index: SEE-04430
Index: SEE-04430
Converter USB-UART FTDI FT232RL - USB plug - Waveshare 6170
Converter which provides communication between the serial interfaces USB and UART. Allows to exchange data between the computers and the systems which use microcontrollers....
Index: WSR-04502
Index: WSR-04502
JustPi THT CF carbon resistor 1/4W 10kΩ - 30pcs.
A set of 30 pieces of resistors designed for THT through-hole mounting. Resistance is 10 kΩ and tolerance is 5%.
Index: JUS-20150
Index: JUS-20150
Female socket extended 1x10 raster 2,54mm for Arduino - 5pcs
10-pin female connector strip, allows you to extend the Arduino connectors. Raster: 2.54 mm. Pirce for 5 pcs of connectors.
Index: SPF-01750
Index: SPF-01750
Relays module, 8 channels with opto-isolation - 10A/250VAC contacts - 5V coil - blue
The module has eight relays SRD-05 with coil powered with a voltage of 5 V along with optoelectronic isolation. The system allows you to control actuators with microcontroller...
Index: MOD-02966
Index: MOD-02966
The NTC 110 thermistor with a resistance of 47 kΩ and a tolerance of 5 %.
Index: PAS-04951
Index: PAS-04951
Adapter IDC 10pin 1.25mm - Molex PicoBlade 1.25mm for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on Molex PicoBlade connector with a pitch of 1.25 mm and has four pins for soldering the goldpin of...
Index: DNG-10927
Index: DNG-10927
MicroHDMI cable - HDMI 2.0 original for Raspberry Pi 4/5 - 1m - black
Official microHDMI - HDMI cable licensed by Raspberry Pi Foundation to connect RPi 4 or RPi 5 minicomputer with a monitor. Black model with a length of 1 m .
Index: RPI-16336
Index: RPI-16336
Electrolytic capacitor Low ESR 10uF/50V 5x11mm 105C THT - 10pcs
The ectrolytic through hole capacitor of low impedance (LOW ESR) 10 uF / 50 V. Pins' pitch: 2 mm. Size Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-01224
Index: PAS-01224
Raspberry Pi camera tape - 5cm 15-core 1mm raster
Tape with a length of 5 cm connecting the minicomputer Raspberry Pi with the dedicated camera. The connector has 15 veins, pitch is 1 mm.
Index: RPI-01907
Index: RPI-01907
Index: MOT-03869
Set of CF THT 1/4W resistors described - 640pcs.
A set of 64 values of 0.25 W threaded resistors with a 5 % tolerance, 10 pieces each. The elements are signed, which makes it easier to find the right value.
Index: PAS-04549
Index: PAS-04549
Voltage divider 5V/25V for Arduino
A voltage divider is used, when the measured voltage has a larger value than the A/D converter's range. The device works in the range from 0 V to 25 V. The output voltage has a...
Index: MOD-08231
Index: MOD-08231
Push button 10cm - white - flat
Big button with an outer diameter of 10 cm with a built-in white LED illuminating the dome.
Index: DNG-12664
Index: DNG-12664
A ring of 7 individually addressable WS2812 5050 RGB LEDs with integrated driver and mounting holes. One pin of the microcontroller is enough to operate the module. The outer...
Index: GRL-13444
Index: GRL-13444
Lamp with motion sensor 2700K - black - 20cm - Yeelight
A small lamp that emits a warm light that is gentle on the eyes . The built-in wide-range intelligent motion sensor turns on the lamp when it detects your presence. The...
Index: INN-22699
Index: INN-22699
CNY70 reflective optocoupler sensor
Reflective optocoupler used, for example, to distinguish the edges or for line detection. Case dimensions - 7 x 7 x 6 mm,through hole installation.
Index: UCC-00052
Index: UCC-00052
Splitter Wire for Servos Y - 60 cm (JR)
Wire splitter for servos with length of 60 cm. The wire allows you to connect two servos to one input of the controller.
Index: KAB-01390
Index: KAB-01390
StepStick DRV8825 Stepper Motor Driver
Stepper motor's driver based on the system DRV8825, allows you to control the motor with a current consumption of up to 1.5 A (with cooling of up to 2.2 A) per coil, at...
Index: MOD-03739
Index: MOD-03739