Filament Rosa3D Refill PLA Magic Silk 1,75mm 1kg - Gold-Silver
Index: ROS-24206
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
ELECTRONICS - Strona 45
Loading...
Big Push Button 6cm - green - inclined
Big button with an outer diameter of 6 cm with a built-in LED illuminating the dome.
Index: DNG-12301
Index: DNG-12301
Printer nozzle 1mm MK8 - filament 1,75mm - copper
Nozzle with a hole of 1 mm is suitable for most available printheads in printers 3D. Supports filaments with a diameter of 1.75 mm. It has MK8 thread.
Index: DNG-13965
Index: DNG-13965
Limit switch with folding roller - WK7124
Limit switch with a 7 cm long spring loaded lever ended with a folding roller. It operates at 250 V and the maximum load is 5 A. The limit switch is used to detect the position...
Index: AKS-14639
Index: AKS-14639
RetroPie Gaming Kit with Raspberry Pi 4B - 4GB
A set to build a gaming console based on the Raspberry Pi 4B minicomputer in 4 GB version with a microSD card with NOOBs uploaded and a 3 A power supply and an effective...
Index: RPI-16380
Index: RPI-16380
JustPi THT CF carbon resistor 1/4W 56kΩ - 30pcs.
The set consists of 30 resistors. The electronic elements are designed for THT through-hole mounting. Resistance is 56 kΩ and tolerance is 5%.
Index: JUS-20010
Index: JUS-20010
Straight goldpin 2x40 connector with 2,54mm pitch - white - 10pcs. - justPi
Male goldpin plug with 80 pins in a 2x40 system. The pin pitch is 2.54 mm and the connector housing is white . The element works well in the implementation of projects...
Index: JUS-20033
Index: JUS-20033
- Reduced price
- Promotion
Cable for analog Sharp distance sensors - Pololu 117
Cable with JST plug for analog distance sensors from Sharp company. Length: 30 cm
Index: PLL-00028
Index: PLL-00028
Quartz resonator 12MHz - HC49 - small - 10 pcs.
Quartz resonator in low-profile, through-hole housing.
Index: PAS-00133
Index: PAS-00133
DIP switch 4-pole - red - 5pcs.
Table slide switch with four levers. Pins pitch: 2.54 mm Height: 5.5 mm
Index: SWT-00368
Index: SWT-00368
MicroUSB type B 5 pin - connector for breadboard - MSX
Connector allows you to connect microUSB connectors type B with 5-wire plug to a breaboard. Module suitable for the standard breadboards. It is characterized by small...
Index: MSX-02642
Index: MSX-02642
Jack 3,5mm stereo female jack - JY039-5P
Jack female 3.5 mm stereo socket. It has pins for the through-hole soldering (THT) on the PCB.
Index: KAB-02734
Index: KAB-02734
Magnetic sensor to open door/window - reed contact CMD918
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 9.5 x 18 mm.
Index: SES-03126
Index: SES-03126
Gravity: Analog Liquid Level Sensor (FS-IR02)
Photoelectric liquid's level sensor. It has high sensitivity without the need to use the mechanical parts. The probe withstands high temperature and high pressure.
Index: DFR-06612
Index: DFR-06612
The holding electromagnet is powered by 24 V with a power of 2.5 W. It holds a mass of 3 kg at a standard acceleration due to gravity of 9.8 m/s 2 . The body diameter is 20...
Index: MOD-07027
Index: MOD-07027
Waterproof Ultrasonic distance sensor JSN-SR04T 20-450cm
Waterproof ultrasonic sensor operating in the range from 20 cm to 450 cm. It is powered with voltage of 5 V. The output is a signal whose duration is proportional to the...
Index: MOD-07266
Index: MOD-07266
DC plug 4,0x1,7mm for cable - 10 pcs.
DC plug φ 4.0 x 1.7 mm per wire, plug housing is made of plastic. The length of the plug is about 11 mm. Sold for 10 pieces.
Index: KAB-07514
Index: KAB-07514
Bipolar transistor NPN BD911 100V/15A - 5 pcs.
NPN bipolar transistor, 100 V, 15 A. Lead arrangement: BCE. Price for 5 pieces.
Index: UCC-07875
Index: UCC-07875
Bistabile switch ON-OFF PB-12A-213WD, round 30V/1A
Bistable switch with a round attachment with a loading capacity of 1A contacts for 30 V.
Index: AKS-10235
Index: AKS-10235
USB cable A - B Lanberg - with ferrite filter - 1.8m
USB (type A) - USB (type B) cable used to connect computer with devices equipped with USB B slots. Its length is 1.8 m. It has a ferrite noise filter.
Index: IMP-11975
Index: IMP-11975
Official keyboard for Raspberry Pi Model 4B/3B+/3B/2B - black-grey
The official keyboard for minicomputer Raspberry Pi in versions 4B, 3B+, 3B, 2B and 1B+. It has an ergonomic design to ensure ease of use. Equipped with 78 keys, connects via...
Index: RPI-14021
Index: RPI-14021
Fan 5V 30x30x8 mm for Raspberry Pi case
Low-noise 30 x 30 mm fan for Raspberry Pi. It is equipped with a two-pin GPIO raspberry fan. The fan features a slim design - 8 mm and low noise level. Screws and mounting nuts...
Index: LON-15170
Index: LON-15170
SanDisk memory card microSD 32GB 80MB/s class 10 + Raspberry Pi OS
SanDisk microSD memory card, class 10, with a capacity of 32 GB , popularly used in devices such as smartphones, tablets and cameras. The data transfer speed is 80 MB/s....
Index: RPI-17091
Index: RPI-17091
Fan 12V 80x80x10,8mm - 2 wires
Fan size 80 x 80 x 10.8 mm . It is powered by 12 V , draws up to 0.18 A current. Its rotational speed is 1600 rpm , provides an airflow of 11.2 CFM, operates at a volume...
Index: ODR-17196
Index: ODR-17196
5V fan 30x30x10mm - with JST 2.54mm connector
5 V mounting fan with dimensions 30 x 30 x 10 mm . Equipped with two 30 cm long cables ended with JST 2.54 mm connector. The fan is used, among others as a cooling element in...
Index: DNG-18678
Index: DNG-18678