- New
- New
- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 44
Loading...
DC 5,5/2,1mm socket with 50cm cable
DC power supply socket φ5.5 x 2.1 mm with a wire approx. 50 cm long.
Index: KAB-05688
Index: KAB-05688
Potentiometer knob GC16 red - 6/16 mm - 5pcs
Knob for rotation potentiometer on axis of 6 mm. The height is 14.6 mm and the outer diameter is 16 mm.
Index: MOD-05736
Index: MOD-05736
TEA5767 I2C FM stereo radio tuner module
A module that allows you to build a fully functional radio. It is controlled by the I2C bus. It is powered with the voltage from 2.5 V to 5.5 V.
Index: UCC-06639
Index: UCC-06639
Connector 2,54 mm - socket housing 8-pin - 5pcs.
The 8-pin socket's case on the cable, the pitch is 2.54 mm. The kit includes 5 x 8-pin cases.
Index: KAB-06779
Index: KAB-06779
2,54 mm - angular plug 3-pin - 5pcs.
The 3-pin angular plug for printing, the pitch is 2.54 mm. The set includes 5 x 3-pin plugs.
Index: KAB-06790
Index: KAB-06790
2,54 mm - angular plug 2-pin - 5pcs.
Angled 2-pin plug for printing, 2.54 mm pitch. Set includes 5 2-pin plugs.
Index: KAB-06791
Index: KAB-06791
Assembly bar male 10-pin, raster 5,08mm, angular closed
Disconnectable terminal block, male, angled, 10-pin. Raster 5,08 mm. Height 12 mm.
Index: KAB-07133
Index: KAB-07133
- Sale
- SPECIAL OFFERS
IRF520 MOSFET Driver Module - Iduino ST1168
The executive module with the MOSFET transistor with the N channel to control the devices with higher current consumption than allowed by the control system, for example, a...
Index: MOD-08236
Index: MOD-08236
A set of 200 resistors with the 1 W power. Elements are in the through hole THT case.
Index: PAS-08280
Index: PAS-08280
RFiD keychain - 125kHz - 10szt.
The RFID identifier in the form of a keychain. Each chip has a unique code. The device works at a distance of 2 - 5 cm from the reader , the carrier frequency is 125 kHz....
Index: MOD-09413
Index: MOD-09413
AC IEC double male / female socket with latch
Dual IEC male / female slot mounted in the case on the latch.
Index: MOD-09458
Index: MOD-09458
Arcade Concave Button 3.5cm - blue - SparkFun COM-09337
Concave button with an outer diameter equal to 35 mm and a height of 65 mm. To the button attached is a simple limit switch.
Index: SPF-10079
Index: SPF-10079
- Sale
- SPECIAL OFFERS
DFRobot Gravity - analog soil moisture sensor - corrosion resistant - SEN0193
The device is used to measure soil moisture by the capacitive detection. It has a built-in voltage regulator which provides an operating voltage range from 3.3 V to 5 V. It is...
Index: DFR-10305
Index: DFR-10305
Logic system CD74ACT14E - 6x inverter with Schmitt trigger
Logic system 6 x inverter with working voltage from 4.5 V to 5.5 V, in DIP 14 case.
Index: UCC-11764
Index: UCC-11764
WiFi module ESP-01M ESP8285 - 11GPIO, ADC, PCB Antenna
Wi-fi module based on the chip ESP8285. It works in the wi-fi 802.11 b/g/n standard. It is equipped with 18 pins - pitch of 1,6 mm, 11 of which are GPIO, 1 ADC and UART. It has...
Index: DNG-12252
Index: DNG-12252
- Reduced price
- SPECIAL OFFERS
Wireless keyboard + mouse Smart H20 - black
Compact, wireless keyboard with touchpad and backlight for remote computer control. The device works with the Raspberry Pi. The set also includes the USB adaptor and charging...
Index: DNG-12293
Index: DNG-12293
Velleman K / MOWM - a set of PVC wire / wire - 10 colors - 60m
Set of PVC wire cables in 10 colors. They are used, for example, for alarm installation. Total cable length is 60 m, AWG 24.
Index: VEL-13013
Index: VEL-13013
Grove module with a monochrome OLED 0,96" display with a resolution of 128 x 64 px. It communicates through I2C interface and is based on the SSD1308Z system. The product is...
Index: SEE-13338
Index: SEE-13338
Printer nozzle 0,5mm MK8 - filament 1,75mm - copper
Nozzle with a hole of 0.5 mm is suitable for most available printheads in printers, 3D. Supports filaments with a diameter of 1.75 mm. It has M6 threads.
Index: DNG-13962
Index: DNG-13962
Cytron Maker Drive MX1508 - two-channel motor controller 9.5V/1A
Simple to use, two-channel DC motor driver with H-bridge. 1 A continuous current per channel (1.5 A momentary). Power supply from 2.5 V to 9.5 V. Output current at 5 V is 0.2 A.
Index: CTN-13999
Index: CTN-13999
Heatsink 40x30x5mm for Raspberry Pi 4 with thermoconductive tape - blue
The 40 x 30 x 5 mm radiator is fully compatible with the Raspberry Pi 4 minicomputer as well as other electronic circuits. It has a layer of self-adhesive and double-sided...
Index: ODS-15696
Index: ODS-15696
Laser distance sensor Lidar TFMini-S UART / I2C - 12m
Laser distance sensor that measures precisely from 0.1 m to 12 m with an accuracy of 0.06 m. The blind spot has been reduced to 10 cm. The sensor communicates through the...
Index: BEN-15862
Index: BEN-15862
Cytron Maker Reflect - Analog IR reflectance sensor
Maker Reflect is a small reflective sensor equipped with an IR diode that sends out an infrared light beam, which returns to the sensor after reflection from the surface and...
Index: CTN-16056
Index: CTN-16056
Grove - water level sensor - 10cm - Seeedstudio 101020635
Sensor to measure the water level in a vessel up to 10 cm using the Arduino module. The measurement is made by volume . The tile is equipped with a Grove connector, for...
Index: SEE-16346
Index: SEE-16346