Filament Fiberlogy Impact PLA 1,75mm 0,85kg - Olive Green
Index: FLA-24998
- New
- Reduced price
- Promotion
Plastic case Kradex Z47U IP54 - 50x40x21mm black with props
Index: KDX-05919
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
ELECTRONICS - Strona 49
Loading...
Potentiometer knob RCL14 red - 6/14mm - 5 pcs.
Knob for rotation potentiometer on axis of 6 mm. The height is 20 mm and the outer diameter is 14 mm. 5 pcs.
Index: MOD-05734
Index: MOD-05734
LED RGB Ring WS2812B 5050 x 12 diodes - 50mm
A ring of 12 individually addressable 5050 RGB LEDs with integrated driver. One pin of the microcontroller is enough to operate the module. The outer diameter of the circle is...
Index: LED-06245
Index: LED-06245
MCP23018-E/SP - 16-Bit I/O Expander with Open-Drain Outputs
The system allows to increase the number of pins (up to 16) of the microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...
Index: UCC-06506
Index: UCC-06506
Connector 2,54 mm - socket housing 10-pin - 5pcs.
The 10-pin socket's case on the cable, the pitch is 2.54 mm. The kit includes 5 x 10-pin cases.
Index: KAB-06778
Index: KAB-06778
RFID identification card - 13.56MHz - 10pcs.
The RFID identifier in the form of a plastic card with the size of a payment card. Each chip has a unique 32-bit code. The device works at a small distance from the reader,...
Index: MOD-07053
Index: MOD-07053
Assembly bar female 10-pin, raster 5,08mm, brass
Seperable terminal block, female, 10-pin. Pitch of 5.08 mm. Height is 15.1 mm. Screw on the flat screwdriver (-).
Index: KAB-07111
Index: KAB-07111
AC IEC double male / female socket with latch
Dual IEC male / female slot mounted in the case on the latch.
Index: MOD-09458
Index: MOD-09458
Laser diode 5mW red 650nm 5V - dot
The laser module emits a light in the form of a red dot. Its power is <5mW. Voltage supply from 3 to 5 V.
Index: DNG-11815
Index: DNG-11815
Extension of the microSD card slot - 48cm
Extension of a slot for microSD cards, for example, in Raspberry Pi, with a ribbon with a length of 48 cm.
Index: DNG-12250
Index: DNG-12250
Big button with an outer diameter of 10 cm with the built-in red LED illuminating the dome.
Index: DNG-12665
Index: DNG-12665
Push button 10cm - blue - flat
Big button with an outer diameter of 6 cm with the built-in blue LED illuminating the dome.
Index: DNG-12666
Index: DNG-12666
DIY kit for smog sensor - air purity sensor PM2.5 and PM10
The kit allows to build your own meter of smog. The kit includes wi-fi ESP8266 module + NodeMCU v3, the sensor PMS7003, adapter for the PMS sensor, humidity sensor, microUSB...
Index: SES-13434
Index: SES-13434
Grove - 12-bit Magnetic Rotary Position Sensor / Encoder (AS5600)
The module is equipped with AS5600 magnetic encoder with 12-bit resolution. It has greater accuracy, is non-contact and has no angle limitation, unlike a traditional...
Index: SEE-15546
Index: SEE-15546
Filament Prusa PETG 1,75mm 1kg - Orange
Filament made of PETG by the world-famous 3D printing company Prusa Research. Material in orange , made with very high accuracy of 0.02 mm. Diameter of the filter is 1.75...
Index: PSA-15926
Index: PSA-15926
Mini Oval Speaker 1W 8Ohm - 30x20x5mm - Adafruit 4227
Small speaker with 1W power and 8 ohm resistance. It is equipped with a 2-pin JST connector with a 1.25 mm pitch so you can plug it directly into consoles such as PyGamer...
Index: ADA-19458
Index: ADA-19458
Quick connector with solder + heat shrink foil 3mm - 5pcs.
The 40 mm long, 3 mm inside diameter, heat shrinkable quick connector has a tin ring built into the tube. It is designed to connect wires with cross-section from 0,5 to 0,1...
Index: DNG-19607
Index: DNG-19607
Rotary potentiometer 250kOhm linear 1/5W B250K - 5pcs.
The B250K carbon-coated linear rotary potentiometer has three leads that fit on a contactor board. Connected to a microcontroller's analog-to-digital converter (e.g. Arduino...
Index: DNG-19614
Index: DNG-19614
Qwiic flexible cable with 4-pin connector - 20cm - SparkFun PRT-17258
4-pin cable, length 20 cm . Terminated on both sides with JST Qwiic 4-pin connector with 1 mm pitch.
Index: SPF-19837
Index: SPF-19837
Feather ESP32-S3 - WiFi, GPIO module - compatible with Arduino - Adafruit 5323
Another Adafruit board from the Feather series, The module is based on the ESP32-S3 system, equipped with 8 MB Flash memory , no built-in PSRAM memory. The dual-core...
Index: ADA-21464
Index: ADA-21464
Official Raspberry Pi keyboard - red-white - DE
The official Raspberry Pi keyboard allows you to enter characters on the popular Raspberry Pi single-board computer, but can also be used with other devices via USB . It has...
Index: RPI-23092
Index: RPI-23092
A set of three FPC ribbons , in lengths of 25mm, 40mm and 100mm , designed to connect dedicated PCIe adapters to the Raspberry Pi 5. These ribbons feature impedance...
Index: PIB-25173
Index: PIB-25173
AVR microcontroller - ATmega8A-AU SMD
Atmel microcontroller AVR with 32-led case soldered on surface - SMD. Voltage supply range from 2.7 V to 5.5 V, frequency up to 16 MHz, has 8 KB Flash, 1 KB RAM, 512 bytes of...
Index: UCC-00079
Index: UCC-00079
AVR microcontroller - ATmega16A-PU - DIP
Popular microcontroller AVR from Atmel in a DIP case.
Index: UCC-00115
Index: UCC-00115
USB standard connector, type A in SMD surface soldered housing.
Index: KAB-00419
Index: KAB-00419